# Corrosion circuit

> A corrosion circuit is a section of piping whose parts share similar process conditions, one material and the same expected damage mechanisms.

- Label: Fact
- Type: Glossary term
- Published: 2026-11-13T03:06:14+09:00
- By: Jun Zhong
- Researched and drafted by: Beacon's AI newsroom
- Checked by: Jun Zhong on 2026-11-13
- Topics: Refining
- Canonical: https://beacon.winda.ai/glossary/corrosion-circuit/

In piping it is usually called a piping circuit, and each circuit is inspected, assessed and recorded as one unit [1][2]. Thickness monitoring locations are set within each circuit; the US Chemical Safety Board (CSB) notes that the API 570 piping code allows fewer where corrosion is uniform and calls for more where it is localized [1].

It is a family of pipes expected to corrode alike, so readings at sample points stand for the whole family. That fails when one part differs: in the 2019 Philadelphia refinery fire, an elbow with more nickel and copper corroded faster than the rest of its circuit, which had 141 monitoring locations by then, none on that elbow [1].

## Sources

1. [Fire and Explosions at Philadelphia Energy Solutions Refinery Hydrofluoric Acid Alkylation Unit (Investigation Report No. 2019-04-I-PA), US Chemical Safety and Hazard Investigation Board (CSB)](https://www.csb.gov/assets/1/20/PES_Final_Report_Published_October_2022_r1.pdf?16845), 2022-10-11
2. [Petroleum Refinery Process Safety Management National Emphasis Program (CPL 03-00-004), US Occupational Safety and Health Administration (OSHA)](https://www.osha.gov/enforcement/directives/cpl-03-00-004)

Published by Winda Beacon (https://beacon.winda.ai).
