# Injection point

> An injection point is a place where water, a chemical or another stream is fed into a process line, for example wash water or a neutralizer.

- Label: Fact
- Type: Glossary term
- Published: 2026-11-13T03:06:14+09:00
- By: Jun Zhong
- Researched and drafted by: Beacon's AI newsroom
- Checked by: Jun Zhong on 2026-11-13
- Topics: Refining
- Canonical: https://beacon.winda.ai/glossary/injection-point/

Wash water dissolves salts that would otherwise foul equipment [1]; neutralizer stops a crude tower overhead from turning acidic [2]. The piping just downstream can thin fast [1], and the 2007 refinery emphasis program of the US Occupational Safety and Health Administration (OSHA) checks that employers set thickness measurement locations at injection points and the piping near them [3].

It is where something is added to the flow; the pipe just after it is a known weak spot. In the 2001 Humber refinery explosion in England, an elbow 670 mm downstream of a water injection point added after commissioning thinned from about 7 to 8 mm to 0.3 mm and burst; the injected water had washed away a protective iron sulfide layer [1].

## Sources

1. [Public Report of the Fire and Explosion at the ConocoPhillips Humber Refinery on 16 April 2001 (copy hosted by the Institution of Chemical Engineers), UK Health and Safety Executive (HSE)](https://www.icheme.org/media/10687/public-report-of-the-fire-and-explosion-at-the-conocophillips-humber-refinery.pdf)
2. [Prevent Corrosion and Ensure Reliability (J. Danis), Chemical Engineering Progress, American Institute of Chemical Engineers (AIChE)](https://www.aiche.org/sites/default/files/cep/20200359.pdf)
3. [Petroleum Refinery Process Safety Management National Emphasis Program (CPL 03-00-004), US Occupational Safety and Health Administration (OSHA)](https://www.osha.gov/enforcement/directives/cpl-03-00-004)

Published by Winda Beacon (https://beacon.winda.ai).
