# Remaining life

> Remaining life is the time left before damage takes a component to the limit at which it can no longer safely stay in service.

- Label: Fact
- Type: Glossary term
- Published: 2026-11-13T03:06:14+09:00
- By: Jun Zhong
- Researched and drafted by: Beacon's AI newsroom
- Checked by: Jun Zhong on 2026-11-13
- Topics: Pipelines, Refining
- Canonical: https://beacon.winda.ai/glossary/remaining-life/

For wall thinning, the US Chemical Safety Board (CSB) describes it as the time before piping becomes too thin and must be replaced, projected from thickness readings, a minimum thickness and tracked corrosion rates [1]. For cracks, US gas transmission rules define it as the time a crack needs to reach a size that would fail at the maximum allowable operating pressure, and require a fresh evaluation before half of it has passed (49 CFR 192.712) [2].

It is a countdown from today's wall, or today's crack, to the limit. Inspection timing is often tied to it: some US gas pipeline reassessment intervals are half the time the largest remaining defect needs to grow to a critical size (49 CFR 192.939) [3].

## Sources

1. [Final Investigation Report: Chevron Richmond Refinery Pipe Rupture and Fire (Report No. 2012-03-I-CA), US Chemical Safety and Hazard Investigation Board (CSB)](https://www.csb.gov/assets/1/17/Chevron_Final_Investigation_Report_2015-01-28.pdf?15397)
2. [49 CFR 192.712, Analysis of predicted failure pressure and critical strain level, eCFR, US Office of the Federal Register](https://www.ecfr.gov/current/title-49/section-192.712)
3. [49 CFR 192.939, What are the required reassessment intervals?, eCFR, US Office of the Federal Register](https://www.ecfr.gov/current/title-49/section-192.939)

Published by Winda Beacon (https://beacon.winda.ai).
