# What is AMPP (formerly NACE International)?

> AMPP, the Association for Materials Protection and Performance, is the corrosion and coatings body formed in 2021 by merging NACE International and SSPC. It writes consensus standards under procedures that the American National Standards Institute (ANSI) accredits, keeps legacy designations such as NACE SP0169 and MR0175, and runs certification and contractor accreditation programs.

- Label: Fact
- Type: Explainer
- Published: 2026-11-14T11:53:52+09:00
- By: Jun Zhong
- Researched and drafted by: Beacon's AI newsroom
- Checked by: Jun Zhong on 2026-11-14
- Topics: Pipelines, Refining, Upstream and offshore
- Canonical: https://beacon.winda.ai/library/ampp-nace/

## Why does it matter?

NACE standards did not disappear with the NACE name. AMPP kept the designations of existing NACE and SSPC standards and changes only the date when one is revised [5], so US pipeline rules still cite NACE SP0169 for cathodic protection criteria and NACE SP0502 for external corrosion direct assessment [11][12]. In April 2026 the Pipeline and Hazardous Materials Safety Administration (PHMSA) moved its rules from the 2010 edition of NACE SP0502 to the 2025 edition, a post-merger revision that still carries the NACE name, in a direct final rule set to take effect on 1 January 2027 [13].

## How was AMPP formed?

NACE International, The Corrosion Society, was founded in 1943 and based in Houston, Texas [3]. SSPC: The Society for Protective Coatings was based in Pittsburgh, Pennsylvania [1]. The two merged, and AMPP launched at a virtual event on 6 January 2021; staff had been working together since October 2020 [1].

AMPP runs as two organizations. AMPP itself handles certification, accreditation, membership and advocacy, while AMPP Global Center handles standards, technical and research work, conferences, education and publications [1]. At launch AMPP reported more than 40,000 members in 130 countries [1]. Its October 2022 program overview, using January 2022 data, listed more than 400 standards and technical reports, 25 standards committees and over 1,400 standards volunteers [4].

## What standards does AMPP publish?

AMPP's standards committees work under consensus procedures accredited by ANSI; the current operating manual was approved in April 2024 and accredited by ANSI on 1 May 2024 [6]. The manual sets three classes of standard [6]:

- **Standard Practice (SP):** requirements and recommendations for choosing, designing, installing or operating a material or system, written so they can go into a procurement document. [6]
- **Standard Test Method (TM):** how to run a test on a material, design or operation; pass and fail criteria sit in an SP or MR, not in the TM. [6]
- **Standard Material Requirement (MR):** the required or recommended properties of a material, such as chemistry and mechanical properties. [6]

AMPP also issues guides and technical reports [6]. Each active standard that is not stabilized must be reaffirmed, revised, stabilized or, rarely, cancelled within every 5 years [6].

Naming follows a simple rule. Published NACE and SSPC standards keep their designations, such as NACE SP0169 or the joint SSPC-SP 10/NACE No. 2; standards created after the merger get an AMPP designation, such as AMPP TM21510 [5]. An undated reference means the latest edition applies [5]. The sour-service materials standard is published jointly with the International Organization for Standardization (ISO), as ANSI/NACE MR0175/ISO 15156; its ISO working group maintains it with a NACE maintenance panel that answers interpretation requests [5][8].

## Which AMPP standards are used in oil and gas?

| Designation | Class | Subject | In the Library |
|---|---|---|---|
| NACE SP0169 | SP | Control of external corrosion on buried or submerged metallic piping | [How does cathodic protection work?](/library/cathodic-protection/) |
| NACE SP0502 | SP | Pipeline external corrosion direct assessment (ECDA) | [What is direct assessment (ECDA, ICDA, SCCDA)?](/library/direct-assessment/) |
| NACE SP0204 | SP | Stress corrosion cracking direct assessment | [What is stress corrosion cracking in pipelines?](/library/pipeline-stress-corrosion-cracking/) |
| NACE SP0102 | SP | In-line inspection of pipelines | [What is in-line inspection (ILI) and pigging?](/library/in-line-inspection/) |
| SP0198 | SP | Corrosion under thermal insulation and fireproofing | [What is corrosion under insulation (CUI)?](/library/corrosion-under-insulation/) |
| SP0775 | SP | Corrosion coupons in oilfield operations | [Corrosion coupons vs electrical resistance (ER) probes](/library/corrosion-coupons-vs-er-probes/) |
| ANSI/NACE TM0284 | TM | Hydrogen-induced cracking resistance of pipeline and pressure vessel steels | [Hydrogen induced cracking](/glossary/hydrogen-induced-cracking/) |
| ANSI/NACE MR0175/ISO 15156 | MR | Choosing metals that resist cracking in sour (hydrogen sulfide) production service | [What is NACE MR0175/ISO 15156?](/library/nace-mr0175-iso-15156/) |
| ANSI/NACE MR0103/ISO 17945 | MR | Sulfide stress cracking resistant materials in refining | [Sulfide stress cracking](/glossary/sulfide-stress-cracking/) |

Sources: AMPP popular standards listing [7]; class names from the AMPP operating manual [6].

## What else does AMPP do?

AMPP lists education and credentialing, company accreditation and global standardization among its activities [2].

- **Individual certification:** training and certification in coatings inspection, cathodic protection, coatings, corrosion and coatings application, with training sites in Houston, Pittsburgh and Dubai [9].
- **Contractor accreditation:** the Quality Procedures (QP) programs, formerly SSPC's, include QP 1 for field coating application, QP 3 for shop application and QP 5 for coating inspection companies [10].
- **Research:** NACE's IMPACT study, published 1 March 2016, put the global cost of corrosion at about US$2.5 trillion, 3.4% of world gross domestic product (GDP) in 2013, and estimated that existing control practices could save 15% to 35% of it [14]. See [How much does corrosion cost the oil and gas industry?](/library/cost-of-corrosion/)

The older name lives on in regulation too: the process safety guidance of the Occupational Safety and Health Administration (OSHA) lists the National Association of Corrosion Engineers among the bodies whose codes and standards define good engineering practice [15].

## Where integrity problems show up

| Requirement | What it means for integrity records or work | In the Library |
|---|---|---|
| 49 CFR 195.571 and 195.573(a)(2) | Cathodic protection must meet criteria in named paragraphs of NACE SP0169 (2007 edition); within 2 years of installing it, the operator decides where close-interval surveys are practicable and necessary [12] | [Pipe-to-soil potential](/glossary/pipe-to-soil-potential/) |
| 49 CFR 192.925(b) and 195.588 | Direct assessment plans follow NACE SP0502 through pre-assessment, indirect inspection, direct examination and post-assessment; an April 2026 rule moves them to the 2025 edition from 1 January 2027 [11][12][13] | [What is direct assessment?](/library/direct-assessment/) |
| 49 CFR 192.929(b) | A stress corrosion cracking direct assessment plan must meet NACE SP0204, cover all four steps and include at least three direct examinations in each covered segment [11] | [What is stress corrosion cracking in pipelines?](/library/pipeline-stress-corrosion-cracking/) |
| 49 CFR 192.493 and 195.591 | In-line inspections comply with NACE SP0102 together with API Std 1163 and ANSI/ASNT ILI-PQ [11][12] | [What is in-line inspection (ILI) and pigging?](/library/in-line-inspection/) |
| 29 CFR 1910.119, Appendix C | Process safety information documents the codes and standards relied on, with NACE among the publishers named [15] | [What is mechanical integrity (MI)?](/library/mechanical-integrity/) |

Sources: eCFR 49 CFR 192 and 195 [11][12]; PHMSA direct final rule, 24 Apr 2026 [13]; eCFR 29 CFR 1910.119 [15].

## Sources

1. [NEW Association for Materials Protection and Performance (AMPP) Launches Today (news release), Association for Materials Protection and Performance (AMPP)](https://www.ampp.org/blogs/webmasternaceorg/2021/01/06/new-association-for-materials-protection-and-perfo), 2021-01-06
2. [About AMPP, Association for Materials Protection and Performance (AMPP)](https://www.ampp.org/about)
3. [NACE International Opens New Office in Europe, Association for Materials Protection and Performance (AMPP), archived NACE news](https://www.ampp.org/blogs/sean-martin/2019/02/22/nace-international-opens-new-office-in-europe), 2019-02-22
4. [AMPP Standards Program Overview, Association for Materials Protection and Performance (AMPP)](https://higherlogicdownload.s3.amazonaws.com/NACE/cedda8a4-c3c0-4583-b1b6-3b248e6eb1f2/UploadedImages/standards/pdf/AMPP-Standards-Program-Overview.pdf)
5. [Guide for Specifying AMPP Standards/Documents, Association for Materials Protection and Performance (AMPP)](https://higherlogicdownload.s3.amazonaws.com/NACE/cedda8a4-c3c0-4583-b1b6-3b248e6eb1f2/UploadedImages/standards/pdf/Guide-to-Specifying-AMPP-Standards.pdf)
6. [AMPP Standards Committees Operating Manual, Association for Materials Protection and Performance (AMPP)](https://higherlogicdownload.s3.amazonaws.com/NACE/cedda8a4-c3c0-4583-b1b6-3b248e6eb1f2/UploadedImages/standards/pdf/Standards-Committees-Operating-Manual.pdf)
7. [Most popular standards by industry, Association for Materials Protection and Performance (AMPP)](https://www.ampp.org/standards/ampp-standards/popular-standards-by-industry)
8. [Introduction to ISO 15156 maintenance activities, Association for Materials Protection and Performance (AMPP)](https://higherlogicdownload.s3.amazonaws.com/NACE/cedda8a4-c3c0-4583-b1b6-3b248e6eb1f2/UploadedImages/standards/pdf/Introduction-to-ISO-15156-maintenance-activities.pdf), 2021-02-04
9. [Education & Certification, Association for Materials Protection and Performance (AMPP)](https://www.ampp.org/education/certification-information)
10. [Quality Procedures (QP) Programs, Association for Materials Protection and Performance (AMPP)](https://www.ampp.org/qp-program/qp-programs/find-a-qp-program)
11. [49 CFR Part 192 (sections 192.7, 192.493, 192.925, 192.929), eCFR, US Office of the Federal Register](https://www.ecfr.gov/current/title-49/subtitle-B/chapter-I/subchapter-D/part-192)
12. [49 CFR Part 195 (sections 195.3, 195.571, 195.573, 195.588, 195.591), eCFR, US Office of the Federal Register](https://www.ecfr.gov/current/title-49/subtitle-B/chapter-I/subchapter-D/part-195)
13. [Pipeline Safety: Standards Update-NACE SP0502 (direct final rule), 91 FR 22025, US Pipeline and Hazardous Materials Safety Administration (PHMSA), via Federal Register (govinfo)](https://www.govinfo.gov/content/pkg/FR-2026-04-24/html/2026-08051.htm), 2026-04-24
14. [International Measures of Prevention, Application, and Economics of Corrosion Technologies Study (IMPACT), NACE International](http://impact.nace.org/documents/Nace-International-Report.pdf), 2016-03-01
15. [29 CFR 1910.119, Process safety management of highly hazardous chemicals (Appendix C), eCFR, US Office of the Federal Register](https://www.ecfr.gov/current/title-29/subtitle-B/chapter-XVII/part-1910/subpart-H/section-1910.119)

Published by Winda Beacon (https://beacon.winda.ai).
