# API 510 vs API 570 vs API 653: which code covers which equipment?

> API 510 covers the in-service inspection of pressure vessels, API 570 of metallic process piping and API 653 of steel aboveground storage tanks. All three are American Petroleum Institute (API) documents that take over once equipment is built, covering inspection, repair and alteration, and each has its own API inspector certification.

- Label: Fact
- Type: Explainer
- Published: 2026-11-13T09:26:54+09:00
- By: Jun Zhong
- Researched and drafted by: Beacon's AI newsroom
- Checked by: Jun Zhong on 2026-11-13
- Topics: Pipelines, Refining, Upstream and offshore
- Canonical: https://beacon.winda.ai/library/api-510-vs-api-570-vs-api-653/

## Why does it matter?

The edition a US regulator enforces is not always the one API currently sells. Federal pipeline rules require atmospheric and low-pressure steel breakout tanks (tanks that absorb surges or hold liquid for onward pipeline transport) to be inspected and repaired to API 653, yet the edition those rules incorporate is the 3rd, from December 2001 [5][6][7]. API's 2025 catalog lists the 5th edition, from November 2014 [1]. Offshore, the Bureau of Safety and Environmental Enforcement (BSEE) cites the 10th edition of API 510 (2014) and the 4th edition of API 570 (2016), one edition behind API's current versions [1][8].

## API 510 vs API 570 vs API 653 at a glance

| | API 510 | API 570 | API 653 |
|---|---|---|---|
| Full title | Pressure Vessel Inspection Code: In-Service Inspection, Rating, Repair, and Alteration | Piping Inspection Code: In-Service Inspection, Rating, Repair, and Alteration of Piping Systems | Tank Inspection, Repair, Alteration, and Reconstruction |
| Equipment | Pressure vessels in hydrocarbon and chemical process plants, plus the pressure-relieving devices that protect them | Metallic piping systems, plus their pressure-relieving devices | Steel aboveground storage tanks built to API 650 or its forerunner, API Specification 12C |
| Scope notes from API's summary | Vessels built to ASME Section VIII Division 1 or 2 (not Division 3), vessels built to no code, and special vessels a jurisdiction has approved | Piping already in service; the code sets the inspection and condition-monitoring program and gives repair guidance | Foundation, bottom, shell, structure, roof, attached fittings, and nozzles up to the first flanged, threaded or welded joint |
| Work covered | Inspection, repair, alteration, rerating | Inspection, rating, repair, alteration | Inspection, repair, alteration, relocation, reconstruction |
| Current edition (API 2025 catalog) | 11th, October 2022 (Errata 1, March 2023) | 5th, February 2024 | 5th, November 2014, with addenda (the third dated November 2023) |
| Companion inspection practice | RP 572, pressure vessels (5th, November 2023) | RP 574, piping components (5th, February 2024) | RP 575, atmospheric and low-pressure tanks (5th, September 2024) |
| US federal rules that cite it (edition incorporated) | 30 CFR 250.851, offshore production vessels; 49 CFR 195.205 and 195.432(c), breakout tanks built to API 2510 (10th, 2014) | 30 CFR 250.841, offshore platform production piping (4th, 2016) | 49 CFR 195.205, 195.307 and 195.432(b), atmospheric and low-pressure steel breakout tanks (3rd, 2001) |
| API inspector certification | API 510 Pressure Vessel Inspector | API 570 Piping Inspector | API 653 Aboveground Storage Tank Inspector |
| CSB investigation on this equipment | Anacortes, Washington, 2010: heat exchanger rupture from high temperature hydrogen attack | Philadelphia, Pennsylvania, 2019: thinned pipe elbow with no thickness monitoring point | Delaware City, Delaware, 2001: corroded acid tank whose internal inspection kept being postponed |

Sources: API 2025 Publications Catalog [1]; API certification programs [4]; eCFR 49 CFR 195.3, 195.205, 195.307, 195.432 and 30 CFR 250.198, 250.841, 250.851 [5] to [9]; US Chemical Safety and Hazard Investigation Board (CSB) reports [10] to [12].

## When is API 510 used?

- **For vessels in service in refining, petrochemical and chemical plants.** API's summary applies the code to every hydrocarbon and chemical process vessel once it is in service and lets owners use it in other industries if they choose [1][2]. Its companion, RP 572, describes inspection of towers, heat exchangers, air coolers, reactors and spheres [1].
- **When a vessel is repaired, altered or rerated** after construction, work that API's announcement of the current edition places within the code alongside in-service inspection [2].
- **Offshore,** where BSEE requires pressure and fired vessels that support production to be repaired, maintained and inspected to API 510 [9].
- **For pressurized breakout tanks built to API 2510,** which federal pipeline rules send to API 510, not API 653, for inspection and repair [6][7].

Outside refining and chemicals the National Board Inspection Code (NBIC) usually plays this role; a 1990 guide from the National Institute of Standards and Technology (NIST) described the two as having similar in-service requirements [15]. More: What is API 510?

## When is API 570 used?

- **For metallic piping in service and its relief devices,** in refineries and chemical plants. RP 574 adds inspection practice for pipe, tubing, fittings and valves other than control valves [1][3]. Where plant piping ends and a pipeline begins is covered in Piping vs pipeline: what is the difference?. More: What is API 570?
- **Offshore,** where BSEE requires platform production process piping to be designed, inspected, repaired and maintained to API RP 14E and API 570 [9].
- **In the UK,** where the Health and Safety Executive (HSE) treats API 570, RP 574 and Energy Institute guidance as relevant good practice for pipework at major hazard sites and offshore installations [14].

## When is API 653 used?

- **For steel aboveground tanks once in service,** mainly those built to API 650 or Specification 12C; owners may also apply it to other steel tanks built to a tank specification [1]. More: What is API 653 (aboveground storage tank inspection)?
- **When a tank is repaired, altered, moved or rebuilt.** Where API 653 and API 650 conflict for a tank already in service, API's summary gives API 653 precedence [1]. New tank construction is covered in What is API 650 (welded steel tanks for oil storage)?.
- **For US pipeline breakout tanks.** Federal rules require inspection, repair and reconstruction to API 653, leave the need for a hydrostatic test after repair to the standard, and do not allow its risk-based option for setting the internal inspection interval [6][7].

## Where integrity problems show up

| Code | What its inspections find well | What they can miss or get wrong | In the Library |
|---|---|---|---|
| API 510 | General wall loss, trended as a corrosion rate that guides the next inspection date [15] | Early high temperature hydrogen attack: the CSB found it hard to detect, with results that depend on the technique and the inspector's skill [12] [12] | [What is high temperature hydrogen attack (HTHA)?](/library/high-temperature-hydrogen-attack/) |
| API 570 | Thinning at condition monitoring locations (CMLs) in circuits that corrode evenly [11] | A fitting that corrodes faster than its circuit: in Philadelphia (2019) an elbow with no CML thinned to 0.011 inch; at a UK refinery, readings at four points on a dead-leg relief line missed a local thin spot (2019) [11][14] | What are condition monitoring locations (CMLs)?, [Dead leg](/glossary/dead-leg/) |
| API 653 | Holes in roof and shell: the CSB judged that a full external inspection would probably have found them [10] [10] | An internal inspection first due in 1996 was still pending at the 2001 collapse, and only spot thickness checks near known leaks had been made [10] | How are inspection intervals set for vessels, piping and tanks? |
| All three, under US process safety rules | Equipment inspected to the employer's chosen good practice, with each inspection documented [16] | OSHA's refinery program cited too few thickness readings, frequencies that did not match the chosen practice, rising readings left unexplained, and insulated equipment never checked underneath [13] | What is mechanical integrity (MI)?, [What is corrosion under insulation (CUI)?](/library/corrosion-under-insulation/) |

Sources: CSB reports on Delaware City (2002) [10], Philadelphia (2022) [11] and Anacortes (2014) [12]; OSHA 3918 (2017) [13]; HSE safety alert CEMHD2-2019 [14]; NIST SP 780 (1990) [15]; 29 CFR 1910.119(j)(4) [16].

## A common mix-up

API 650 and API 653 are often treated as one standard, as are ASME Section VIII and API 510. In each pair the first sets how equipment is built and the second how it is kept fit once it runs. NIST noted in 1990 that the main US vessel design codes contain no rules for in-service inspection [15], and API's summary of API 653 states that it governs over API 650 for tanks already in service [1]. See [What is ASME Section VIII (pressure vessel design)?](/library/asme-section-viii/) and [What is ASME B31.3 (process piping)?](/library/asme-b31-3/).

## Sources

1. [2025 Publications Catalog (entries for API 510, API 570, Std 653, RP 572, RP 574, RP 575 and RP 576) (API 510, 11th edition, October 2022 (Errata 1, March 2023); API 570, 5th edition, February 2024; API Std 653, 5th edition, November 2014, with addenda (Addendum 3, November 2023); RP 572, 5th edition, November 2023; RP 574, 5th edition, February 2024; RP 575, 5th edition, September 2024; RP 576, 5th edition, 2024), American Petroleum Institute (API)](https://www.api.org/-/media/files/publications/2025-catalog/2025_pubs%20catalog.pdf)
2. [New Edition of API 510 Enhances Safety of Pressure Vessel Inspection Code, American Petroleum Institute (API)](https://www.api.org/products-and-services/standards/important-standards-announcements/tradeannouncement-api510)
3. [API Strengthens Piping Inspection Standards with New Updates, American Petroleum Institute (API)](https://www.api.org/products-and-services/standards/important-standards-announcements/570-574-tradepress)
4. [Individual Certification Programs, American Petroleum Institute (API)](https://www.api.org/products-and-services/individual-certification-programs)
5. [49 CFR 195.2, Definitions, and 195.3, What documents are incorporated by reference partly or wholly in this part?, eCFR, US Office of the Federal Register](https://www.ecfr.gov/current/title-49/subtitle-B/chapter-I/subchapter-D/part-195/subpart-A)
6. [49 CFR 195.432, Inspection of in-service breakout tanks, eCFR, US Office of the Federal Register](https://www.ecfr.gov/current/title-49/subtitle-B/chapter-I/subchapter-D/part-195/subpart-F/section-195.432)
7. [49 CFR 195.205, Repair, alteration and reconstruction of aboveground breakout tanks, and 195.307, Pressure testing aboveground breakout tanks, eCFR, US Office of the Federal Register](https://www.ecfr.gov/current/title-49/subtitle-B/chapter-I/subchapter-D/part-195)
8. [30 CFR 250.198, Documents incorporated by reference, eCFR, US Office of the Federal Register](https://www.ecfr.gov/current/title-30/chapter-II/subchapter-B/part-250/subpart-A/section-250.198)
9. [30 CFR 250.841, Platforms, and 250.851, Pressure vessels (including heat exchangers) and fired vessels, eCFR, US Office of the Federal Register](https://www.ecfr.gov/current/title-30/chapter-II/subchapter-B/part-250/subpart-H)
10. [Investigation Report: Refinery Incident, Motiva Enterprises LLC, Delaware City Refinery (Report No. 2001-05-I-DE), US Chemical Safety and Hazard Investigation Board (CSB)](https://www.csb.gov/assets/1/20/Motiva_Final_Report.pdf?13758), 2002-08-28
11. [Investigation Report: Fire and Explosions at Philadelphia Energy Solutions Refinery Hydrofluoric Acid Alkylation Unit (No. 2019-04-I-PA), US Chemical Safety and Hazard Investigation Board (CSB)](https://www.csb.gov/assets/1/20/PES_Final_Report_Published_October_2022_r1.pdf?16845), 2022-10-11
12. [Investigation Report: Catastrophic Rupture of Heat Exchanger, Tesoro Anacortes Refinery (Report 2010-08-I-WA), US Chemical Safety and Hazard Investigation Board (CSB)](https://www.csb.gov/assets/1/7/tesoro_anacortes_2014-may-01.pdf)
13. [Process Safety Management for Petroleum Refineries: Lessons Learned from the Petroleum Refinery Process Safety Management National Emphasis Program (OSHA 3918), US Occupational Safety and Health Administration (OSHA)](https://www.osha.gov/Publications/OSHA3918.pdf)
14. [Catastrophic rupture of dead-leg pipe-work (Safety alert, Bulletin No. CEMHD2-2019), UK Health and Safety Executive (HSE)](https://www.hse.gov.uk/safetybulletins/catastrophic-rupture-dead-leg-pipe-work.htm), 2019-08-20
15. [NIST Special Publication 780, Guidelines for Pressure Vessel Safety Assessment (S. Yukawa), US National Institute of Standards and Technology (NIST)](https://nvlpubs.nist.gov/nistpubs/Legacy/SP/nistspecialpublication780.pdf)
16. [29 CFR 1910.119, Process safety management of highly hazardous chemicals, eCFR, US Office of the Federal Register](https://www.ecfr.gov/current/title-29/subtitle-B/chapter-XVII/part-1910/subpart-H/section-1910.119)

Published by Winda Beacon (https://beacon.winda.ai).
