# What is digital transformation in oil and gas (the digital oilfield)?

> Oil and gas digital transformation, often called the digital oilfield, is the use of connected sensors, control system data, shared data platforms, remote operations, models and AI to run wells, plants and pipelines from measured data. The IEA estimated in 2017 that widespread use could cut oil and gas production costs by 10% to 20%.

- Label: Fact
- Type: Explainer
- Published: 2026-11-15T00:16:49+09:00
- By: Jun Zhong
- Researched and drafted by: Beacon's AI newsroom
- Checked by: Jun Zhong on 2026-11-15
- Topics: Upstream and offshore
- Canonical: https://beacon.winda.ai/library/digital-oilfield/

## Why does it matter?

The International Energy Agency (IEA) put a number on the prize in 2017: if digital technologies were used widely, oil and gas production costs could fall by 10% to 20%, through better processing of seismic data, more sensors and improved reservoir models, and technically recoverable resources worldwide could rise by about 5%, mostly in shale gas [1]. The same shift changes the risk picture. The US Government Accountability Office (GAO) counted more than 1,600 offshore facilities and structures on the US outer continental shelf in 2022 and found that modern offshore production leans heavily on remotely connected operational technology (OT), much of it important to safety [3].

## What does a digital oilfield consist of?

No single system makes a field digital. NIST describes the basic chain for dispersed assets: field sites gather readings, communications carry them to a control centre, and the centre logs, displays and trends them for operators [4]. The digital oilfield adds layers on top of that chain, each feeding the next and each with a typical obstacle.

| Layer | What it does | Typical systems | The usual blocker |
|---|---|---|---|
| Sensors and instruments | Measure the process and the equipment where they are | Downhole pressure gauges, fibre optic and miniaturised sensors, drones for pipelines and flare stacks [1] | Some useful data, such as downhole pressure or geochemistry, is not collected routinely at all [6] |
| Communications and supervisory control and data acquisition (SCADA) | Carry field readings to a control centre and commands back | Remote terminal units and programmable logic controllers at field sites, linked by radio, cable, fibre or satellite [4] | Existing networks were not built for the volumes of data new services want to move [2] |
| Historians and data platforms | Store readings over time and make them available for analysis | A data historian, a central database for statistical analysis of process data [4]; cloud, private cloud or edge storage [2] | Data sits in silos, and some suppliers bundle data with their software so the operator cannot reach its own records easily [2] |
| Remote operations | Let people watch and run assets from somewhere else | Onshore control centers with remote access into offshore OT [3] | Remote access is a path for attackers ([OT cybersecurity](/library/ot-cybersecurity/)); many legacy devices cannot check who sent a command [3] |
| Analytics and condition-based maintenance | Turn trends into maintenance and operating decisions | Predictive models on historian data [7] | Results are only as good as the data; mismatched timestamps across systems were a common complaint [2] |
| Models and digital twins | Represent an asset or a process in software to test and optimize it | Field and reservoir models, drilling [digital twins](/library/digital-twin/) [2] | A twin is limited by the data that keeps it current [2] |
| AI | Detect anomalies, recommend actions, help with paperwork and planning | Machine learning near the control layer; large language models and [agents](/library/industrial-ai-agent/) on business networks [7] | Normalized, high-quality sensor data is hard to gather across a distributed OT estate [7] |

## Where did the digital oilfield come from?

The idea is older than the current wave of AI. The IEA notes that the sector, upstream above all, has a long history with digital technology [1]. In Norway, the 1990s brought so-called e-operations, in which information technology made integrated operations centres possible; the trend since has been to collect far more data and build new services on it, such as digital twins and cloud services [2]. The country's OG21 technology strategy counts predictive maintenance, automated drilling control and unmanned platforms among the technologies it expects to lower costs and raise recovery [2].

The IEA expected the next steps upstream to extend tools already in use rather than replace them: automated drilling rigs, robots that inspect and repair subsea equipment, drones over long pipelines, and faster processing of large seismic datasets [1].

## What does it change at a site?

- **Where people work.** Remote access lets operators monitor and control offshore operations from onshore control centers. Most US platforms still carry personnel, but unmanned production is becoming more common [3].
- **What regulators expect to be watched live.** For well operations with a subsea blowout preventer (BOP), a surface BOP on a floating facility, or a high pressure high temperature well, US offshore rules require continuous, automatic real-time monitoring of the BOP control system, the fluid circulating system and downhole conditions, transmitted as gathered and watched by qualified personnel under a written plan [5].
- **How maintenance is planned.** Operators interviewed for the Norwegian regulator reported that condition-based maintenance (see [predictive maintenance](/library/predictive-maintenance/)) is where some of the largest savings come from, and that automation with anomaly detection can cut the number of people needed offshore [2].
- **What can be seen early.** Better data on a drilling operation can support earlier kick detection and so lower the risk of a well control incident, provided the new tools add no weaknesses of their own [2].
- **What gets measured underground.** The US Department of Energy funds low-cost real-time monitoring of well data that is not usually gathered, such as downhole pressure, to fill gaps that hold back analytics and machine learning [6].

## What usually blocks oil and gas digital transformation?

- **Silos and ownership.** Data is still spread across separate systems, the gap an [industrial knowledge graph](/library/industrial-knowledge-graph/) is meant to close; some suppliers ask for more data than their service needs, which makes operators think harder about who owns it [2].
- **Data quality.** A predictive maintenance tool can be no better than its input data, so a wrong reading can lead to a wrong maintenance decision [2].
- **Legacy OT.** Older devices were never meant to connect to outside networks; many cannot log commands, and many run operating systems that no longer get security patches [3]. Patching itself is hard, because components often must be taken offline and they need to stay available [3].
- **Cybersecurity.** As OT adopts ordinary computers, operating systems and network protocols, it becomes far less isolated than earlier systems [4]. A literature screen in the Norwegian study found 14 of 34 papers on the challenges of the industrial internet of things in O&G ranking cybersecurity as the biggest one [2].
- **Capacity of existing installations.** Facilities designed before the cloud were not built to stream data out, and some new providers want to plug straight into the control layer to collect it [2].
- **Skills and suppliers.** Operators said the industry lacks enough expertise to secure connected, data-driven systems, and that some newer, smaller providers lack it too [2].

**Analysis:**
Read together, the sources point the same way for oil and gas digital programmes: the sensors and the analytics are rarely the hard part. The hard part is the middle of the stack, where data from decades of separate systems must be found, cleaned, time-aligned, owned and moved out of the control network without opening a path back in. A programme that measures success by the decisions it changes, rather than by the number of dashboards, tends to meet those questions early.

## Where does AI fit?

AI sits on top of the stack, not beside it. CISA-led guidance from December 2025 places predictive machine learning on historian data close to supervisory systems, and large language models and [AI agents](/library/industrial-ai-agent/) mostly on enterprise networks [7]. It recommends pushing data out of the OT network for AI to use, instead of giving AI standing access into it [7]. It also warns of two people problems: staff who misread AI outputs, and staff who lose the manual skills they need when an AI system fails [7].

## Digital oilfield, digital twin or digital handover?

The three are often used as if they were one thing. The digital oilfield is the whole operating programme across a producing field or a set of assets. A [digital twin](/library/digital-twin/) is one model of one asset inside that programme, kept current from the asset's data; the Norwegian study describes drilling twins as relatively mature already [2]. [Digital handover](/library/digital-handover-cfihos/) is earlier still: the structured transfer of a new facility's data from the project to the operator, which decides how much of the stack has clean data on day one.

## Sources

1. [Digitalization and Energy (report, 5 November 2017), International Energy Agency (IEA), licence CC BY 4.0](https://www.iea.org/reports/digitalisation-and-energy), 2017-11-05
2. [Principles of digitalisation and IT-OT integration, ICT security: Robustness in the petroleum sector 2020 (G. K. Hanssen and others), report 2023:00189, version 1.0, SINTEF Digital, for the Petroleum Safety Authority Norway (now Havtil)](https://www.havtil.no/contentassets/74df0357721f4eb088a29f659f86f7cf/sintef-report---principles-of-digitalisation-and-it-ot-integration-part-1---signert.pdf), 2023-02-06
3. [Offshore Oil and Gas: Strategy Urgently Needed to Address Cybersecurity Risks to Infrastructure, GAO-23-105789, US Government Accountability Office (GAO)](https://www.gao.gov/products/gao-23-105789), 2022-10-26
4. [NIST SP 800-82 Rev. 3, Guide to Operational Technology (OT) Security, US National Institute of Standards and Technology (NIST)](https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-82r3.pdf), 2023-09-28
5. [30 CFR 250.724, What are the real-time monitoring requirements?, Legal Information Institute (Cornell), reproducing the eCFR](https://www.law.cornell.edu/cfr/text/30/250.724)
6. [Oil and Gas, Upstream, Enabling Technologies (program page), US Department of Energy, National Energy Technology Laboratory (NETL)](https://netl.doe.gov/oil-gas/upstream/enablingtechnologies)
7. [Principles for the Secure Integration of Artificial Intelligence in Operational Technology (joint guidance, TLP:CLEAR), US Cybersecurity and Infrastructure Security Agency (CISA), Australian Signals Directorate's Australian Cyber Security Centre and partner agencies](https://www.cisa.gov/sites/default/files/2026-01/joint-guidance-principles-for-the-secure-integration-of-artificial-intelligence-in-operational-technology-508cV2.pdf), 2025-12-03

## From Winda

Winda reads from the systems the operator already runs. Maintenance systems, historians, simulation files and document control feed the shared asset record, and every source stays as it was. It runs in the operator's cloud, hybrid or air-gapped, as the operator chooses, and the data stays in the operator's account. [See Winda's digital transformation](https://winda.ai/digital-transformation/)

Published by Winda Beacon (https://beacon.winda.ai).
