# What is failure modes and effects analysis (FMEA)?

> Failure modes and effects analysis (FMEA) reviews each item in a system for the ways it can fail and the effect of each failure on the system. It often also records causes and means of detection. Ranking failure modes by severity, and often likelihood, makes it a failure modes, effects and criticality analysis (FMECA); IEC 60812:2018 describes both.

- Label: Fact
- Type: Explainer
- Published: 2026-11-14T11:57:56+09:00
- By: Jun Zhong
- Researched and drafted by: Beacon's AI newsroom
- Checked by: Jun Zhong on 2026-11-14
- Topics: Refining, Upstream and offshore
- Canonical: https://beacon.winda.ai/library/fmea/

## Why does it matter?

An FMEA done after the design is settled rarely changes it. The US military standard that set out the method in 1980, MIL-STD-1629A, states that the greatest criticism of FMECA had been how little it was used to improve designs, mainly because it was done too late or apart from the design work, and it calls timing perhaps the most important factor [1]. The standard's answer was to start the analysis as soon as preliminary design information exists and to update it as the design changes [1]. The same logic now runs through maintenance: Norway's offshore rules require failure modes, causes and mechanisms to be identified for failures with serious consequences, and that analysis then drives what maintenance is done [7].

## How is an FMEA carried out?

1. **Set the scope.** Define the system, its boundary and interfaces, and the levels of detail to analyze, from the whole system down to parts [1][4].
2. **List functions.** State what each item must do, in measurable terms where possible [3][4].
3. **List failure modes.** A failure mode is the way a failure shows itself, such as a seized bearing or a leak [1][4].
4. **Trace effects.** Follow each failure mode to its effect on the item, on the next assembly up and on the whole system [1][3].
5. **Find causes.** Causes include physical or chemical processes such as wear and corrosion, design and quality defects, and misapplication [1].
6. **Record detection.** Note how an operator or maintainer would discover the failure; failures with no means of detection are flagged [1].
7. **Rank.** Classify severity by the worst potential consequence and, for an FMECA, combine it with how often the mode is expected [1]. NASA's guide uses ten-step scales for severity and for probability, adapted from the automotive industry [4].
8. **Act and keep it current.** Use the results for design changes, maintenance tasks and tests, and update the analysis as the design or plant changes [1][2].

The two worksheet lines below are illustrative: they take NASA's published chilled water and motor examples, not a real asset [4].

| Item | Function | Failure mode | Effect | Possible causes | How it would be detected |
|---|---|---|---|---|---|
| Motor bearing on a pump drive | Let the shaft turn under load | Bearing seized | Motor will not turn; flow stops [4] | Lubricant contamination, wrong type or amount; fatigue from misalignment or imbalance; electrical pitting [4] | Vibration analysis, oil and wear particle analysis [4] |
| Pipe in a chilled water loop | Carry water at the required flow and temperature | Major leak | Total loss of flow [4] | Erosion or corrosion thinning the wall [4] | Ultrasonic thickness readings [4] |

Source: NASA RCM guide, 2008, chilled water and motor examples [4].

## How do FMEA, FMECA and RCM relate?

The US Department of Defense (DoD) reliability-centered maintenance manual defines FMEA as breaking the hardware down and identifying failure modes and effects with a severity class, and FMECA as FMEA plus a criticality analysis [3]. MIL-STD-1629A defines criticality as a relative measure of a failure mode's consequences and how often it occurs [1]. In reliability-centered maintenance (RCM), the FMEA is the first half; RCM then assesses consequences and picks a task for each mode, and the DoD manual notes that an RCM analysis largely satisfies a requirement for an FMEA or FMECA [3].

IEC 60812:2018 (edition 3.0, August 2018) explains how an FMEA or FMECA is planned, performed, documented and maintained, and applies to hardware, software and processes that include human action [2]. Its publisher states that, as a generic standard, it gives no specific guidance for safety applications, and that the 2018 edition added alternative ways of calculating risk priority numbers and a criticality matrix method [2]. Its sibling for hazard studies is IEC 61882:2016 (edition 2.0), an application guide for HAZOP studies, which examine a system with guide words rather than starting from the failure modes of each item [8].

## Where is FMEA used in oil and gas?

- **Process hazard analysis.** US process safety rules list FMEA among the methods for process hazard analysis, with What-If, checklists, hazard and operability study (HAZOP) and fault tree analysis; the method must suit the process, and the analysis must be revalidated at least every five years [5]. The US Environmental Protection Agency's risk management program rule carries the same list [6].
- **Maintenance programs.** Norway's Activities Regulations require systems and equipment to be classified by the consequences of functional failure; for serious failures, the failure modes, causes, mechanisms and likelihood must be identified, and the result sets maintenance activities, frequencies and spare parts [7].
- **Commissioning and maintenance planning.** NASA uses FMEA to build functional test documents, initial maintenance job plans, training needs and predictive testing requirements for new facilities [4].

## What are the limits of FMEA?

- **Timing.** Late or isolated analysis has little effect on design [1].
- **Effort.** NASA notes that compiling causes for each failure mode can take significant effort and expense [4].
- **Shortcuts.** Streamlined analyses that rely on records and staff memory can miss hidden, low-probability failures [4].
- **One mode at a time.** The method analyzes each failure mode in turn and identifies single failure points, items whose failure alone would fail the system [1].

## Where integrity problems show up

| Element or step | Integrity link | In the Library |
|---|---|---|
| Listing failure causes and mechanisms | Norway requires causes and mechanisms for serious failures [7]; physical and chemical processes such as corrosion count as causes [1] | [What is a damage mechanism review?](/library/damage-mechanism-review/) |
| Choosing a process hazard analysis method | US process safety and risk management rules name FMEA among the accepted methods [5][6] | [What is process safety management (PSM)?](/library/process-safety-management/) |
| Recording how each failure is detected | Failures without a means of detection are flagged [1]; protective devices that may fail unseen need failure-finding tests [3] | [What is a safety instrumented system (SIS)?](/library/safety-instrumented-system/) |
| Treating wall loss as a failure mode | NASA's chilled water example links a leak to erosion or corrosion found by ultrasonic thickness readings [4] | [How does ultrasonic thickness measurement work?](/library/ultrasonic-thickness-measurement/) |
| Turning results into maintenance tasks | NASA uses FMEA to set initial job plans and predictive testing requirements [4]; RCM builds on the FMEA to pick tasks [3] | [What is reliability-centered maintenance (RCM)?](/library/reliability-centered-maintenance/) |

Sources: MIL-STD-1629A, 1980 [1]; DoD Manual 4151.22-M [3]; NASA, 2008 [4]; 29 CFR 1910.119(e) [5]; 40 CFR 68.67 [6]; Norway's Activities Regulations, 2024 [7].

## Sources

1. [MIL-STD-1629A, Procedures for Performing a Failure Mode, Effects and Criticality Analysis, US Department of Defense (copy hosted by NASA Kennedy Space Center)](https://extapps.ksc.nasa.gov/reliability/Documents/milstd1629_FMEA.pdf), 1980-11-24
2. [IEC 60812:2018, Failure modes and effects analysis (FMEA and FMECA) (publication page) (IEC 60812:2018, edition 3.0), International Electrotechnical Commission (IEC)](https://webstore.iec.ch/en/publication/26359), 2018-08-10
3. [DoD Manual 4151.22-M, Reliability Centered Maintenance (RCM), incorporating Change 1, US Department of Defense (via Whole Building Design Guide)](https://www.wbdg.org/FFC/DOD/DODMAN/415122m_c1.pdf)
4. [Reliability-Centered Maintenance Guide for Facilities and Collateral Equipment, US National Aeronautics and Space Administration (NASA)](https://www.nasa.gov/wp-content/uploads/2023/06/nasa-rcmguide.pdf)
5. [29 CFR 1910.119, Process safety management of highly hazardous chemicals, paragraph (e) Process hazard analysis, eCFR, US Office of the Federal Register](https://www.ecfr.gov/current/title-29/subtitle-B/chapter-XVII/part-1910/subpart-H/section-1910.119)
6. [40 CFR 68.67, Process hazard analysis, eCFR, US Office of the Federal Register](https://www.ecfr.gov/current/title-40/chapter-I/subchapter-C/part-68/subpart-D/section-68.67)
7. [Regulations relating to conducting petroleum activities (the Activities Regulations), Chapter IX Maintenance, Norwegian Ocean Industry Authority (Havtil) and Norwegian Environment Agency](https://www.havtil.no/globalassets/regelverk/gjeldende-regelverk-2025/aktivitetsforskriften_e.pdf)
8. [IEC 61882:2016, Hazard and operability studies (HAZOP studies): Application guide (publication page) (IEC 61882:2016, edition 2.0), International Electrotechnical Commission (IEC)](https://webstore.iec.ch/en/publication/24321), 2016-03-10

Published by Winda Beacon (https://beacon.winda.ai).
