# What are the main types of heat exchangers in process plants?

> The main heat exchanger types in process plants are shell-and-tube, air-cooled, double-pipe and plate types such as plate-and-frame and plate-fin. Shell-and-tube units are commonly built to TEMA Standards, and API publishes a separate standard for each main type, such as API 660 for shell-and-tube and API 661 for air-cooled exchangers.

- Label: Fact
- Type: Explainer
- Published: 2026-11-13T09:39:01+09:00
- By: Jun Zhong
- Researched and drafted by: Beacon's AI newsroom
- Checked by: Jun Zhong on 2026-11-13
- Topics: LNG, Refining
- Canonical: https://beacon.winda.ai/library/heat-exchanger-types/

## What does a heat exchanger do in a process plant?

A heat exchanger moves heat from a hotter fluid to a cooler one. In most process designs a metal wall keeps the two fluids apart; direct-contact designs, where the fluids mix, are a separate class [2].

In a refinery, exchangers and fired heaters bring feed up to distillation or reaction temperature [1]. Exchangers take that heat from steam or from hot streams elsewhere in the process, while fired heaters supply most of the rest by burning fuel [1]. On the cooling side, plants remove heat with air coolers (fin fans), water-cooled exchangers, gas and liquid coolers and overhead condensers; water, alcohol-water blends and glycol solutions are common coolants [1].

Engineers often name an exchanger by its job rather than its shape. The American Petroleum Institute (API) standard for shell-and-tube units, API 660, lists four duties: heaters, condensers, coolers and reboilers [4].

## What are the main types of heat exchanger?

| Type | How it is built | API standard | Note from the API catalog |
|---|---|---|---|
| Shell-and-tube | A bundle of tubes inside a cylindrical shell; one fluid flows in the tubes, the other around them | API 660, Shell-and-Tube Heat Exchangers | Excludes vacuum steam surface condensers and feedwater heaters |
| Air-cooled (fin fan) | Bundles of finned tubes cooled by air moved by fans | API 661, Air-Cooled Heat Exchangers for General Refinery Service | Written for horizontal bundles |
| Hairpin | One pipe, or a bundle of tubes, inside an outer pipe | API 663, Hairpin Type Heat Exchangers | Includes double-pipe and multitube units |
| Plate-and-frame | Gasketed metal plates clamped together in a frame | API 667, Plate-and-Frame Heat Exchangers | Formerly API 662, Part 1 |
| Spiral plate | Two plates wound into a spiral to form two channels | API 664, Spiral Plate Heat Exchangers | Covers standalone units and units built into a vessel |
| Brazed aluminum plate-fin | Stacked plates and fins joined by brazing | API 668, Brazed Aluminum Plate-Fin Heat Exchangers | Formerly API 662, Part 2 |

Sources: API 2025 Publications Catalog [4]; NPTEL heat exchanger course notes [2]; OSHA Technical Manual [1].

All six sit in two families in the usual teaching scheme: tubular exchangers (double-pipe, shell-and-tube and spiral tube) and plate exchangers (gasketed plate and spiral plate), with finned tube and finned plate designs grouped as extended-surface exchangers [2]. The API catalog lists these exchanger standards under heat transfer equipment for refinery service, and API Recommended Practice 572 treats exchangers and air-cooled exchangers as pressure vessels for inspection purposes [4].

## How do shell-and-tube designs differ?

The main split is in how the tube bundle handles thermal expansion and whether it can be pulled out for cleaning [2].

| Design | Strength | Limitation |
|---|---|---|
| Fixed tubesheet | Lowest cost; most tubes for a given shell size | Shell side cannot be cleaned mechanically; differential expansion may need a shell expansion joint |
| U-tube | Tubes expand freely; bundle can be removed; cheaper than a floating head | Tube bends are cleaned chemically; single tubes are hard to replace |
| Floating head | One tubesheet moves with expansion; both sides can be cleaned mechanically | Bolting for the floating head takes space that could hold tubes |

Source: NPTEL, Process Design of Heat Exchangers [2].

The Tubular Exchanger Manufacturers Association (TEMA), founded in 1939, publishes the TEMA Standards for shell-and-tube construction; its website introduces a 2026 edition [5]. TEMA groups exchangers into three construction classes: R for severe petroleum and related processing, C for general commercial service and B for chemical process service [3][6]. Most shell-and-tube units for process service are built to TEMA, which sets mechanical rules but leaves thermal design to the designer [6].

Reboilers, which boil liquid at the bottom of a distillation column, come in three common forms [2]. A thermosyphon reboiler needs no pump but sits high relative to the column; a forced-circulation reboiler uses a pump and suits viscous or heavily fouling liquids; a kettle reboiler sets the tube bundle in an oversized shell and suits high vaporization rates and vacuum service [2].

## How else are heat exchangers classified?

Course texts also sort exchangers by how heat is transferred and how the fluids flow [2]. Recuperative exchangers pass heat through a wall, while regenerative exchangers store heat in a matrix that the hot and cold streams contact in turn [2]. By flow arrangement, the streams can run in counterflow, parallel flow or crossflow, and each side can carry a single-phase or a boiling or condensing fluid [2].

## Where integrity problems show up

| Exchanger or duty | Typical integrity issue | In the Library |
|---|---|---|
| Crude unit preheat exchangers | Corrosion by hydrogen chloride and hydrogen sulfide | What is hydrochloric acid (HCl) corrosion in crude unit overheads? |
| Crude unit bottoms exchangers | Corrosion by hydrogen sulfide and sulfur compounds | [What is sulfidation (high-temperature sulfur corrosion)?](/library/sulfidation/) |
| Water-cooled exchangers and coolers | Corrosion and fouling from impurities and dissolved oxygen in cooling water; scale from dissolved salts | What is cooling water corrosion? |
| Exchangers downstream of the crude desalter | Fouling when desalting is inadequate, which restricts flow and heat transfer | [What is a crude distillation unit?](/library/crude-distillation-unit/) |
| Reboiler shells | Rupture from overpressure when heated while blocked in from the relief device | What does a pressure relief valve do?; What is management of change (MOC)? |

Sources: OSHA Technical Manual, Section IV, Chapter 2 [1]; CSB case study released 19 October 2016 on a 13 June 2013 reboiler rupture at an olefins plant in Geismar, Louisiana, which killed 2 workers and injured 167 people [7].

A failed tube is a hazard in itself: the fluid on the higher-pressure side flows into the other side, so process fluid can enter a utility system or the reverse [1]. OSHA's manual also notes that exchanger piping that can be blocked in while full of liquid may need pressure relief for thermal expansion [1].

## Sources

1. [OSHA Technical Manual, Section IV, Chapter 2: Petroleum Refining Processes, US Occupational Safety and Health Administration (OSHA)](https://www.osha.gov/otm/section-4-safety-hazards/chapter-2)
2. [Chemical Engineering Design II, Module 1: Process Design of Heat Exchangers, NPTEL (Indian Institutes of Technology and Indian Institute of Science)](https://archive.nptel.ac.in/content/storage2/courses/103103027/pdf/mod1.pdf)
3. [Chemical Engineering Design II, Module 2, Lecture 1: Mechanical Design Standards, NPTEL (Indian Institutes of Technology and Indian Institute of Science)](https://archive.nptel.ac.in/content/storage2/courses/103103027/module2/lec1/1.html)
4. [2025 Publications Catalog (Refining: Heat Transfer Equipment Standards; Inspection of Refinery Equipment), American Petroleum Institute (API)](https://www.api.org/-/media/files/publications/2025-catalog/2025_pubs%20catalog.pdf)
5. [TEMA Standards (2026 edition), Tubular Exchanger Manufacturers Association (TEMA)](https://tema.org/standards/)
6. [Tubular Exchanger Manufacturers Association (TEMA) (encyclopedia entry), Thermopedia, Begell House](https://www.thermopedia.com/content/1182/)
7. [CSB Releases Final Case Study into 2013 Explosion and Fire at Williams Olefins Plant in Geismar, Louisiana, US Chemical Safety and Hazard Investigation Board (CSB)](https://www.csb.gov/csb-releases-final-case-study-into-2013-explosion-and-fire-at-williams-olefins-plant-in-geismar-louisiana/), 2016-10-19

Published by Winda Beacon (https://beacon.winda.ai).
