# What is ISO 14224 (reliability and maintenance data)?

> ISO 14224:2016 sets how reliability and maintenance data on oil, gas and petrochemical equipment are collected and exchanged. It defines equipment boundaries and taxonomy and the minimum equipment, failure and maintenance data to record, so that data from different plants, owners and manufacturers can be compared. The 2016 edition was confirmed in 2022.

- Label: Fact
- Type: Explainer
- Published: 2026-11-14T11:57:56+09:00
- By: Jun Zhong
- Researched and drafted by: Beacon's AI newsroom
- Checked by: Jun Zhong on 2026-11-14
- Topics: LNG, Refining, Upstream and offshore
- Canonical: https://beacon.winda.ai/library/iso-14224/

## Why does it matter?

Failure and maintenance records only help if they mean the same thing from one site to the next. When the UK Health and Safety Executive (HSE) reviewed offshore maintenance between 2004 and 2007, it found that definitions of backlog, deferral, overdue and corrective maintenance, and of what counted as safety-critical, were often unclear and differed across the industry, which made performance indicators and benchmarking hard to build [6]. ISO 14224 is the international standard meant to give the petroleum, petrochemical and natural gas industries a common basis for that data [1]. Norway's offshore regulator relies on it: its guidelines say the standard should be used when companies register the failure and maintenance data they must use to evaluate maintenance effectiveness [2][3].

## What is ISO 14224?

ISO 14224:2016 carries the title *Petroleum, petrochemical and natural gas industries: Collection and exchange of reliability and maintenance data for equipment*. It gives operators in those industries a common format for recording reliability and maintenance data on their equipment across its working life, so that records can pass between plants, owners, manufacturers and contractors [1]. ISO's page adds that it fixes a minimum set of data to gather and states what a data system has to support if it is built to exchange such records [1].

The 2016 text is the third edition and replaced ISO 14224:2006 [1]. ISO published it in September 2016, issued a corrected version in October 2016 and confirmed it after a systematic review in February 2022; technical committee ISO/TC 67 maintains it [1].

## What goes wrong when equipment data is not shared or consistent?

- **Histories attached to the wrong item.** HSE's 2014 review of ageing offshore installations found that maintenance systems usually tag equipment by functional location, so a motor, gearbox and pump share one tag and a replacement pump inherits the old one; traceability is lost and performance trends become confused [5]. HSE suggested a unique tag for each item of kit instead [5].
- **Data that cannot be trended.** The same review found large amounts of information held as free text, which makes trending difficult, and key spreadsheets kept on local drives [5].
- **Fixing on failure.** HSE found that equipment was often upgraded only once it had failed, using its failure history, instead of watching performance trends to catch problems early [5].
- **Wrong readings.** HSE found ultrasonic data recorded wrongly, although accurate data is critical for safety calculations and for predicting when safety-critical elements will fall short of their criteria [5].
- **Assumptions that never get replaced.** The US Department of Defense (DoD) manual on reliability-centered maintenance notes that when data is missing, analysts fall back on conservative expert assumptions, which usually schedule tasks more often than needed; data collected in service later replaces those assumptions and can extend, shorten, add or drop tasks [7].

The DoD manual also asks for failure data to keep being collected and stored in a database after the first analysis, with a robust way to organize it so that it supports maintenance decisions over the equipment's life [7]. A shared data format is what lets that history be pooled across sites and compared.

## Who uses it?

- **Regulators.** Norway's Activities Regulations require maintenance effectiveness to be evaluated systematically from registered performance and technical condition data [2]. The guidelines say ISO 14224 and Annex E of ISO 20815, *Production assurance and reliability management*, should be used when registering failure and maintenance data [3].
- **Data-sharing projects.** The Offshore and Onshore Reliability Data (OREDA) project has published reliability data handbooks since the 1980s, most recently a 6th edition in 2015, and states that its data structures and taxonomies were foundational to international reliability and maintenance standards [4].
- **Operators, owners, manufacturers and contractors** exchanging data within and between companies [1].

## Where integrity problems show up

| Element or step | Integrity link | In the Library |
|---|---|---|
| Setting equipment boundaries and taxonomy | Histories must follow the physical item; UK HSE found that tagging by functional location gave a replaced pump the old tag, confused histories and made trending difficult [5] | [What is an asset register and what data should it hold?](/library/asset-register/) |
| Recording failure cause and mechanism | Norway requires failure causes and mechanisms to be identified for failures with serious consequences [2] | [What is failure modes and effects analysis (FMEA)?](/library/fmea/) |
| Classifying safety-critical failures | HSE found work orders without recorded test results against performance standards, so safety-critical element status could not be monitored [6] | [What are safety and environmental critical elements (SECEs)?](/library/safety-critical-elements/) |
| Measuring maintenance effectiveness | Norway requires evaluation from registered data, using ISO 14224 and ISO 20815 Annex E [2][3] | [Which KPIs measure asset integrity performance?](/library/integrity-kpis/) |
| Updating maintenance tasks from failure history | The US Department of Defense (DoD) manual uses service data to extend, shorten, add or drop maintenance tasks [7] | [What is reliability-centered maintenance (RCM)?](/library/reliability-centered-maintenance/) |

Sources: ISO 14224:2016 page [1]; Norway's Activities Regulations and guidelines, 2024 [2][3]; HSE KP4, 2014 [5]; HSE KP3, 2007 [6]; DoD Manual 4151.22-M [7].

## Sources

1. [ISO 14224:2016, Petroleum, petrochemical and natural gas industries: Collection and exchange of reliability and maintenance data for equipment (standard page) (ISO 14224:2016, edition 3, confirmed 2022), International Organization for Standardization (ISO)](https://committee.iso.org/ru/standard/64076.html)
2. [Regulations relating to conducting petroleum activities (the Activities Regulations), Chapter IX Maintenance, Norwegian Ocean Industry Authority (Havtil) and Norwegian Environment Agency](https://www.havtil.no/globalassets/regelverk/gjeldende-regelverk-2025/aktivitetsforskriften_e.pdf)
3. [Guidelines regarding the Activities Regulations, Norwegian Ocean Industry Authority (Havtil) and other Norwegian authorities](https://www.havtil.no/globalassets/regelverk/gjeldende-regelverk-2025/aktivitetsforskriften_veiledning_e.pdf)
4. [Standards and publications, OREDA (Offshore and Onshore Reliability Data) project](https://oreda.com/standards-and-publications/)
5. [Key Programme 4 (KP4): Ageing and life extension programme, UK Health and Safety Executive (HSE), Energy Division](https://www.hse.gov.uk/offshore/assets/docs/kp4-report.pdf)
6. [Key Programme 3: Asset Integrity Programme, UK Health and Safety Executive (HSE), Offshore Division](https://www.hse.gov.uk/offshore/assets/docs/kp3.pdf)
7. [DoD Manual 4151.22-M, Reliability Centered Maintenance (RCM), incorporating Change 1, US Department of Defense (via Whole Building Design Guide)](https://www.wbdg.org/FFC/DOD/DODMAN/415122m_c1.pdf)

Published by Winda Beacon (https://beacon.winda.ai).
