# What is mechanical and vibration fatigue?

> Mechanical fatigue is cracking caused by repeated stress cycles, each too small to break the part on its own. Vibration fatigue is the same process driven by vibration from machines, flow or pressure pulses. Cracks usually start at welds, threads and changes of section, often on small-bore connections. Energy Institute guidelines address vibration-induced fatigue in process pipework.

- Label: Fact
- Type: Explainer
- Published: 2026-11-14T12:02:06+09:00
- By: Jun Zhong
- Researched and drafted by: Beacon's AI newsroom
- Checked by: Jun Zhong on 2026-11-14
- Topics: LNG, Pipelines, Refining, Upstream and offshore
- Canonical: https://beacon.winda.ai/library/mechanical-vibration-fatigue/

## Why does it matter?

In June 2025 the US Bureau of Safety and Environmental Enforcement (BSEE) described an offshore gas release from a 3/4-inch threaded pipe nipple on a compressor suction scrubber [1]. The nipple had cracked by fatigue in a high-vibration environment; gas escaped within 10 feet of hot compressor surfaces, the platform was shut in and everyone mustered, and no one was hurt [1]. In 2014, Australia's National Offshore Petroleum Safety and Environmental Management Authority (NOPSEMA) reported fatigue cracks on several small-bore connections and a fatigue failure on a hydrocarbon test separator header, which the operator had first recorded as a minor weep [2].

## How does fatigue cracking work?

Fracture faces often carry beach marks that record the crack's progress [7].

The US National Institute of Standards and Technology (NIST) calls fatigue the most common purely stress-related form of localized damage in pressure equipment, and notes that a change in production schedule or flow routing can turn a harmless cyclic stress into a critical one [3].

## What makes plant piping vibrate?

| Source of cycling | How it loads the metal | Plant example |
|---|---|---|
| Flow-induced turbulence | Turbulent flow excites the pipe wall [2] | Offshore seawater cooling and hydrocarbon process piping [2] |
| Mechanical excitation | Machine vibration passes into connected pipework [2][1] | Compressor packages and attached small-bore piping [1] |
| Pulsation | Reciprocating and positive displacement machines send pressure pulses down the line [2] | Reciprocating compressor and pump systems [2] |
| Surge and water hammer | Valve operations and flow changes cause pressure surges [2][3] | Valve operations; deaerators in steam systems [2][6] |
| Cavitation and flashing | Collapsing vapor bubbles cause vibration and noise [2][4] | Centrifugal pumps [4] |
| Pressure and temperature cycles | Repeated start-up, shutdown and pressure swings [3] | Vessels with frequent start-stop duty; liquid pipelines [3][5] |

NOPSEMA lists high-frequency acoustic fatigue as a further source and points operators to the Energy Institute guidelines on avoiding vibration-induced fatigue in process pipework, which apply from design through operation [2].

## Where do fatigue cracks start?

- **Small-bore threaded connections on vibrating equipment.** BSEE named this size of threaded connection as especially vulnerable, with over-tightening and unsupported weight (a sight glass level bridle hung from the nipple) as contributing factors [1].
- **Geometric transitions.** NIST notes new cracks tend to start in high-stress regions at changes of shape and at or near welds [3].
- **Clamped or bolted contact surfaces.** Slight vibratory rubbing under load causes fretting, which often leads to fatigue failure [7].

## How is it different from thermal fatigue and corrosion fatigue?

Thermal fatigue is driven by temperature cycling, for example from intermittent flow, frequent start-stop operation or a leaking valve [3]; see [What is thermal fatigue?](/library/thermal-fatigue/). Corrosion fatigue combines cyclic stress with a corrosive environment, and the damage exceeds what either would cause alone [7]; see [What is corrosion fatigue?](/library/corrosion-fatigue/).

## Where integrity problems show up

| Where it occurs (unit or equipment) | Conditions that drive it | How it is usually found | In the Library |
|---|---|---|---|
| Small-bore threaded connections on compressor packages | Compressor vibration, over-tightening, unsupported attached weight, loosening [1] | Inspection of nipples, fittings and supports for fatigue, wear and loosening; vibration monitoring of the package, both recommended by BSEE [1] | [What is mechanical integrity (MI)?](/library/mechanical-integrity/) |
| Offshore process and seawater piping branches | Flow turbulence, pulsation, valve surge, acoustic excitation, cavitation [2] | Regulator inspection found cracks and signs of earlier repairs; the leak was first logged as a minor weep [2] | [How does an offshore production platform work?](/library/offshore-production-platform/) |
| Pumps, compressors and other rotating equipment | Vibration, which the UK Health and Safety Executive (HSE) calls one of the main causes of rotating equipment failure, through seal damage or fatigue [4] | Vibration monitoring and signature analysis that point to the deteriorating component [4] | [Predictive maintenance](/library/predictive-maintenance/), [Cavitation damage](/library/cavitation/) |
| Liquid pipelines with pressure cycles | Pressure cycling growing cracks, including fatigue cracks started by rail transport of the pipe [5] | Crack-detection in-line inspection; near Cohasset, Minnesota (2002), a 13-inch fatigue crack escaped earlier in-line runs and a 1991 hydrotest [5] | [In-line inspection](/library/in-line-inspection/), [In-line inspection tool types](/library/smart-pig-types/) |
| Deaerator vessels | Water hammer, the only factor that correlated with cracking in surveys, with corrosion fatigue at welds not heat treated [6] | Wet fluorescent magnetic particle testing of internal weld surfaces and heat-affected zones [6] | [Corrosion fatigue](/library/corrosion-fatigue/), [NDT methods](/library/ndt-methods-overview/) |

Sources: BSEE Safety Alert 502 [1]; NOPSEMA Safety Alert 58 [2]; HSE [4]; NTSB PAR-12/01 [5]; OSHA Technical Manual [6].

## Sources

1. [Safety Alert No. 502: Fatigue Cracking of 3/4-Inch Pipe Nipple Results in Gas Release, US Bureau of Safety and Environmental Enforcement (BSEE)](https://www.bsee.gov/sites/bsee.gov/files/2025-06/BSEE%20Safety%20Alert%20502%20-Fatigue%20Cracking%20of%20Three-Quarter-Inch%20Pipe%20Nipple%20Results%20in%20Gas%20Release_0.pdf), 2025-06-10
2. [Safety Alert 58: Vibration-induced fatigue on process pipework, National Offshore Petroleum Safety and Environmental Management Authority (NOPSEMA), Australia](https://www.nopsema.gov.au/sites/default/files/documents/2021-03/A339011.pdf), 2014-01-28
3. [NIST Special Publication 780, Guidelines for Pressure Vessel Safety Assessment (S. Yukawa), US National Institute of Standards and Technology (NIST)](https://nvlpubs.nist.gov/nistpubs/Legacy/SP/nistspecialpublication780.pdf)
4. [Design Codes: Plant (COMAH technical measures), UK Health and Safety Executive (HSE)](https://www.hse.gov.uk/comah/sragtech/techmeasplant.htm)
5. [Pipeline Accident Report NTSB/PAR-12/01: Enbridge Incorporated Hazardous Liquid Pipeline Rupture and Release, Marshall, Michigan, July 25, 2010 (section 1.6.4.1 on the 2002 Cohasset, Minnesota, rupture), US National Transportation Safety Board (NTSB)](https://www.ntsb.gov/investigations/AccidentReports/Reports/PAR1201.pdf)
6. [OSHA Technical Manual, Section IV, Chapter 3: Pressure Vessel Guidelines, US Occupational Safety and Health Administration (OSHA)](https://www.osha.gov/otm/section-4-safety-hazards/chapter-3)
7. [Forms of Corrosion (corrosion fatigue and fretting corrosion), NASA Kennedy Space Center, Corrosion Technology Laboratory](https://public.ksc.nasa.gov/corrosion/forms-of-corrosion/)

Published by Winda Beacon (https://beacon.winda.ai).
