# What is the PHMSA gas transmission mega rule?

> The PHMSA gas transmission mega rule is the industry name for amendments to 49 CFR 192 that grew from one 2016 proposal on gas pipeline safety. They were issued as three final rules: 1 October 2019 (maximum allowable operating pressure reconfirmation, wider assessments), 15 November 2021 (gas gathering) and 24 August 2022 (repair criteria, corrosion control, management of change).

- Label: Fact
- Type: Explainer
- Published: 2026-11-14T12:02:06+09:00
- By: Jun Zhong
- Researched and drafted by: Beacon's AI newsroom
- Checked by: Jun Zhong on 2026-11-14
- Topics: LNG, Pipelines
- Canonical: https://beacon.winda.ai/library/phmsa-gas-transmission-rule/

## Why does it matter?

On 9 September 2010 a gas transmission line ruptured in San Bruno, California, killing 8 people, injuring 51 and destroying 38 homes; the National Transportation Safety Board (NTSB) found the operator's integrity management program rested on incomplete and inaccurate pipeline information [1]. The rule turns that lesson into deadlines: where records needed to support the maximum allowable operating pressure (MAOP) are not traceable, verifiable and complete, operators must reconfirm MAOP on at least 50% of affected mileage by 3 July 2028 and all of it by 2 July 2035 [10]. The Pipeline and Hazardous Materials Safety Administration (PHMSA) calls the 2019 action the Gas Transmission Final Rule [2]. "Mega rule" does not appear in these Federal Register documents; it is shorthand used in industry for the whole package of rules that grew out of the 2016 proposal [1][2].

## Why was the mega rule issued in parts?

PHMSA asked for comment in an advance notice in August 2011, and Congress then passed the Pipeline Safety, Regulatory Certainty, and Job Creation Act, enacted 3 January 2012 [1]. The April 2016 proposal covered 16 topic areas for gas transmission and gathering lines, and PHMSA split it into three rulemakings [1]. Its 2019 preamble planned the repair criteria rule second and the gathering rule third, but the gathering rule was published first, which is why summaries number the parts differently [1][3][4].

| Date | Federal Register action | Status as of 25 Oct 2026 |
|---|---|---|
| 1 Oct 2019 | Gas Transmission Final Rule, 84 FR 52180; effective 1 Jul 2020 | In force [1] |
| 6 Jul 2020 | Amendments granting an industry petition: class location records apply to transmission lines only; narrower MAOP reconfirmation trigger | In force [2] |
| 15 Nov 2021 | Gas gathering rule, 86 FR 63266; effective 16 May 2022 | In force [3] |
| 24 Aug 2022 | Repair criteria, integrity management, corrosion control and management of change rule, 87 FR 52224; effective 24 May 2023 | In force except vacated parts [4][6] |
| 24 Apr 2023 | Technical corrections and responses to two petitions | In force [5] |
| 15 Jan 2025 | Removal of provisions vacated by the D.C. Circuit on 16 Aug 2024 | In force [6] |
| 24 Apr 2026 | Typographical correction to 192.624(c)(6); effective 3 Aug 2026 | In force [7] |
| 8 Jul 2026 | Proposed revision of repair (anomaly response) criteria for gas and liquid lines; comments closed 8 Sep 2026 | Proposal only; no final rule in the Federal Register [8] |

## What did each part require?

**2019, MAOP and assessments [1][10]:**
- MAOP reconfirmation (192.624) for segments in high consequence areas (HCAs) or Class 3 and 4 locations without traceable, verifiable and complete records, and for previously untested segments at or above 30% of specified minimum yield strength (SMYS); six methods, with the resulting records kept for the life of the pipeline. [1][10]
- Material property verification (192.607) and records of diameter, wall thickness, seam type, grade and toughness. [1][10]
- Assessments outside HCAs (192.710) in Class 3 and 4 locations and new moderate consequence areas (MCAs): initial assessment by 3 July 2034, then at least every 10 years. [1][10]
- MAOP exceedance reports, seismicity as a threat, safety features on in-line inspection launchers and receivers, and a 6-month grace period on 7-year reassessments [1].

**2021, gathering [3]:** annual and incident reporting for all onshore gas gathering operators, and a new Type C category (Class 1 lines of 8.625 inches outside diameter or more at higher stress or pressure) with requirements scaled by diameter and nearby buildings. Offshore gathering was outside its scope.

**2022, repair and corrosion [4]:** clearer integrity management data integration with verified data; a management of change process following ASME B31.8S section 11; coating damage surveys after backfill, stronger cathodic protection and interference current controls; inspections starting within 72 hours after extreme weather once the area is safe; new direct assessment standards; updated HCA repair criteria and new non-HCA repair criteria.

## What has changed since 2022?

On 16 August 2024 the US Court of Appeals for the D.C. Circuit vacated three provisions of the 2022 rule: internal corrosion monitoring at 192.478, the immediate repair criterion for cracks with a predicted failure pressure below 1.25 times MAOP, and high-frequency electric resistance welded seams in the immediate criterion for preferential metal loss [6]. PHMSA removed them on 15 January 2025; the dent engineering critical assessment at 192.712(c) was remanded without vacatur and remains in the rules [6]. The eCFR (up to date as of 22 October 2026) shows 192.478 as reserved [10].

Separately, a January 2026 final rule, effective 16 March 2026, added an integrity management alternative for confirming or restoring MAOP after a class location change, an approach PHMSA had allowed through special permits for more than two decades [9].

## Where integrity problems show up

| Requirement | What it means for integrity records or work | In the Library |
|---|---|---|
| MAOP reconfirmation, 192.624 (2019) | Pressure test and material records must be traceable, verifiable and complete, or MAOP is reconfirmed by a listed method on a fixed schedule [1][10] | [Maximum allowable operating pressure](/glossary/maximum-allowable-operating-pressure/) |
| Material properties records, 192.67 and 192.607 | Pipe installed after 1 July 2020 needs material records kept for its life; missing records are filled by verification programs [10] | [Specified minimum yield strength (SMYS)](/glossary/specified-minimum-yield-strength/) |
| Class location records, 192.5(d) (2019, clarified 2020) | Transmission operators keep records of each segment's current class and how it was determined [2] | [Class location](/glossary/class-location/) |
| Assessments outside HCAs, 192.710 | Class 3 and 4 and MCA segments need a first assessment by 3 July 2034; MCAs count major roads because, after the 2012 Sissonville, West Virginia, rupture closed Interstate 77 for 19 hours, the NTSB recommended adding such roads to HCA sites [1][10] | [High consequence area](/glossary/high-consequence-area/) |
| Repair criteria, 192.714 and 192.933 (2022) | In-line inspection results drive response times inside and outside HCAs; the 2026 proposal would revise the schedule [4][8] | [What happens after an in-line inspection run?](/library/ili-anomaly-response/) |
| Corrosion control updates (2022) | Coating surveys after backfill, cathodic protection and interference current records [4] | [How does cathodic protection work?](/library/cathodic-protection/) |

Sources: 84 FR 52180 [1]; 85 FR 40132 [2]; 87 FR 52224 [4]; 91 FR 42272 [8]; 49 CFR 192, eCFR up to date as of 22 Oct 2026 [10].

## Sources

1. [Pipeline Safety: Safety of Gas Transmission Pipelines: MAOP Reconfirmation, Expansion of Assessment Requirements, and Other Related Amendments (final rule), 84 FR 52180, US Pipeline and Hazardous Materials Safety Administration (PHMSA), via Federal Register](https://www.federalregister.gov/documents/2019/10/01/2019-20306/pipeline-safety-safety-of-gas-transmission-pipelines-maop-reconfirmation-expansion-of-assessment), 2019-10-01
2. [Pipeline Safety: Safety of Gas Transmission Pipelines: MAOP Reconfirmation ... Response to a Joint Petition for Reconsideration, 85 FR 40132, PHMSA, via Federal Register](https://www.federalregister.gov/documents/2020/07/06/2020-14403/pipeline-safety-safety-of-gas-transmission-pipelines-maop-reconfirmation-expansion-of-assessment), 2020-07-06
3. [Pipeline Safety: Safety of Gas Gathering Pipelines: Extension of Reporting Requirements, Regulation of Large, High-Pressure Lines, and Other Related Amendments (final rule), 86 FR 63266, PHMSA, via Federal Register](https://www.federalregister.gov/documents/2021/11/15/2021-24240/pipeline-safety-safety-of-gas-gathering-pipelines-extension-of-reporting-requirements-regulation-of), 2021-11-15
4. [Pipeline Safety: Safety of Gas Transmission Pipelines: Repair Criteria, Integrity Management Improvements, Cathodic Protection, Management of Change, and Other Related Amendments (final rule), 87 FR 52224, PHMSA, via Federal Register](https://www.federalregister.gov/documents/2022/08/24/2022-17031/pipeline-safety-safety-of-gas-transmission-pipelines-repair-criteria-integrity-management), 2022-08-24
5. [Technical Corrections; Response to Petitions for Reconsideration (2022 rule), 88 FR 24708, PHMSA, via Federal Register](https://www.federalregister.gov/documents/2023/04/24/2023-08548/pipeline-safety-safety-of-gas-transmission-pipelines-repair-criteria-integrity-management), 2023-04-24
6. [Corrections To Conform to Judicial Review (2022 rule), 90 FR 3713, PHMSA, via Federal Register](https://www.federalregister.gov/documents/2025/01/15/2025-00073/pipeline-safety-safety-of-gas-transmission-pipelines-repair-criteria-integrity-management), 2025-01-15
7. [MAOP Reconfirmation ... ; Correction (final rule; correcting amendment), 91 FR 21984, PHMSA, via Federal Register](https://www.federalregister.gov/documents/2026/04/24/2026-08058/pipeline-safety-safety-of-gas-transmission-pipelines-maop-reconfirmation-expansion-of-assessment), 2026-04-24
8. [Pipeline Safety: Repair Criteria for Hazardous Liquid and Gas Transmission Pipelines (notice of proposed rulemaking), 91 FR 42272, PHMSA, via Federal Register](https://www.federalregister.gov/documents/2026/07/08/2026-13805/pipeline-safety-repair-criteria-for-hazardous-liquid-and-gas-transmission-pipelines), 2026-07-08
9. [Pipeline Safety: Class Location Change Requirements (final rule), 91 FR 1608, PHMSA, via Federal Register](https://www.federalregister.gov/documents/2026/01/14/2026-00566/pipeline-safety-class-location-change-requirements), 2026-01-14
10. [49 CFR Part 192, Transportation of Natural and Other Gas by Pipeline: Minimum Federal Safety Standards (sections 192.67, 192.478, 192.607, 192.624, 192.710), eCFR, US Office of the Federal Register](https://www.ecfr.gov/current/title-49/subtitle-B/chapter-I/subchapter-D/part-192)

Published by Winda Beacon (https://beacon.winda.ai).
