# What are the PHMSA pipeline safety regulations (49 CFR 192 and 195)?

> The PHMSA pipeline safety regulations are the federal rules in 49 CFR Parts 190 to 199 that set minimum safety standards for US gas and liquid pipelines. Part 192 covers gas pipelines; Part 195 covers hazardous liquid and carbon dioxide pipelines, from design, construction and testing to corrosion control, operations and integrity management.

- Label: Fact
- Type: Explainer
- Published: 2026-11-14T12:02:06+09:00
- By: Jun Zhong
- Researched and drafted by: Beacon's AI newsroom
- Checked by: Jun Zhong on 2026-11-14
- Topics: LNG, Pipelines, Upstream and offshore
- Canonical: https://beacon.winda.ai/library/phmsa-pipeline-safety-regulations/

## Why does it matter?

The rules are federal, but the Pipeline and Hazardous Materials Safety Administration (PHMSA) says most pipeline inspections are carried out by state inspectors, largely because of the size of the gas distribution network [2]. States take on all or part of intrastate oversight through annual certifications and agreements, and may add stricter rules of their own [1][2]. In Texas, for example, intrastate lines answer to the Railroad Commission of Texas and interstate lines to PHMSA [10]. The same federal text therefore reaches an integrity engineer through different inspectors depending on where the pipe runs.

## What does each part of 49 CFR 190 to 199 cover?

| Part | What it covers [1] |
|---|---|
| 190 | PHMSA's inspection and enforcement procedures and operators' rights in response |
| 191 | Gas pipeline reports: incidents, safety-related conditions, annual data |
| 192 | Minimum safety standards for gas gathering, transmission and distribution lines |
| 193 | Liquefied natural gas (LNG) facilities |
| 194 | Oil spill response plans for onshore oil pipelines |
| 195 | Safety and reporting for hazardous liquid and carbon dioxide pipelines, including operator qualification |
| 196 | Protection of underground pipelines from excavation damage |
| 198 | Grants to state pipeline safety programs |
| 199 | Drug and alcohol testing |

PHMSA describes this as a national program for about 3.3 million miles of pipelines run by about 3,000 operators (page checked 25 October 2026) [1][3].

## How do Parts 192 and 195 compare?

| Topic | Part 192 (gas) | Part 195 (hazardous liquids, CO2) |
|---|---|---|
| Design and components | Subparts C and D [4] | Subpart C [5] |
| Construction | Subpart G (transmission lines and mains) [4] | Subpart D [5] |
| Pressure testing | Subpart J [4] | Subpart E [5] |
| Corrosion control | Subpart I [4] | Subpart H [5] |
| Operations and maintenance | Subparts L and M [4] | Subpart F [5] |
| Personnel qualification | Subpart N [4] | Subpart G [5] |
| Integrity management in high consequence areas (HCAs) | Subpart O; reassessment at most every 7 calendar years for lines at or above 30% of specified minimum yield strength, with a possible 6-month extension [4] | 195.452 for segments that could affect an HCA; 5-year intervals, not over 68 months [5] |
| Assessments outside HCAs | 192.710: Class 3 and 4 and moderate consequence areas; first by 3 July 2034, then at least every 10 years [4] | 195.416: piggable onshore line pipe; first by 1 October 2029, then at least every 10 calendar years [5] |
| Distribution integrity management | Subpart P [4] | Not applicable |

## Which pipelines are covered, and who inspects them?

Part 192 applies to gas pipeline facilities onshore and on the Outer Continental Shelf, with exclusions such as certain producer-operated offshore lines upstream of the transfer to a transporting operator [4]. Part 195 covers liquid and carbon dioxide pipelines in or affecting interstate or foreign commerce, but excludes, among others, transportation through onshore production, refining or manufacturing facilities and their in-plant piping [5]. Gathering lines are covered only in part, by type and location [4][5].

Intrastate facilities, including gas distribution, gas and liquid transmission, gathering lines, storage fields and LNG plants, may be overseen by state agencies under annual certifications and agreements [2]; in Texas, for example, interstate lines stay under PHMSA jurisdiction [10]. PHMSA can also issue advisory bulletins and written interpretations of the rules [1].

## How do the regulations change?

Changes arrive as Federal Register rulemakings. Recent ones include the gas integrity management amendments of 2019 and 2022, and a separate hazardous liquid rule of 1 October 2019 [6]. A final rule effective 28 June 2024 incorporated more than 20 new or updated consensus standards; Part 192 now cites ASME B31.8S-2018 for gas integrity management [4][7]. A rule effective 16 March 2026 added an integrity management alternative for class location changes [8]. On 8 July 2026 PHMSA proposed revised anomaly repair criteria for gas transmission and hazardous liquid lines; comments closed 8 September 2026, and as of 25 October 2026 no final rule had been published [9].

## Where integrity problems show up

| Requirement | What it means for integrity records or work | In the Library |
|---|---|---|
| Corrosion control, 192 Subpart I and 195 Subpart H | Cathodic protection, coating and monitoring work, with records of surveys and tests [4][5] | [How does cathodic protection work?](/library/cathodic-protection/) |
| HCA integrity programs, 192 Subpart O and 195.452 | Identify HCAs, assess and reassess on fixed maximum intervals, act on findings [4][5] | [High consequence area](/glossary/high-consequence-area/) |
| Assessments outside HCAs, 192.710 and 195.416 | In-line inspection, pressure test or approved alternatives on deadlines in 2029 and 2034, then every 10 years [4][5] | [What is in-line inspection (ILI) and pigging?](/library/in-line-inspection/) |
| Material records, 192.67, and maximum allowable operating pressure (MAOP) rules, 192.619 and 192.624 | Transmission pipe installed after 1 July 2020 needs material records for life; missing records can force MAOP reconfirmation [4] | [Maximum allowable operating pressure](/glossary/maximum-allowable-operating-pressure/) |
| Class locations, 192.5 and 192.611 | Building counts set the class, which sets design and pressure margins; a class change can require MAOP action [4][8] | [Class location](/glossary/class-location/) |
| Incorporated standards, 192.7 and 195.3 | Only the edition named in the rule applies, for example ASME B31.8S-2018 and API Standard 1163, second edition [4][5] | [What is ASME B31.8S?](/library/asme-b31-8s/) |

Sources: 49 CFR 192 and 195, eCFR up to date as of 22 Oct 2026 [4][5]; 91 FR 1608, 2026 [8].

## Sources

1. [Pipeline Safety Regulations (Stakeholder Communications), US Pipeline and Hazardous Materials Safety Administration (PHMSA)](https://primis.phmsa.dot.gov/stakeholder-comms/safetystandards/)
2. [State Pipeline Safety Regulators (Stakeholder Communications), PHMSA](https://primis.phmsa.dot.gov/stakeholder-comms/stateregulators/)
3. [Pipeline Basics (Stakeholder Communications), PHMSA](https://primis.phmsa.dot.gov/stakeholder-comms/pipelinebasics/)
4. [49 CFR Part 192, Transportation of Natural and Other Gas by Pipeline: Minimum Federal Safety Standards, eCFR, US Office of the Federal Register](https://www.ecfr.gov/current/title-49/subtitle-B/chapter-I/subchapter-D/part-192)
5. [49 CFR Part 195, Transportation of Hazardous Liquids by Pipeline, eCFR, US Office of the Federal Register](https://www.ecfr.gov/current/title-49/subtitle-B/chapter-I/subchapter-D/part-195)
6. [Pipeline Safety: Safety of Gas Transmission Pipelines: Repair Criteria, Integrity Management Improvements, Cathodic Protection, Management of Change, and Other Related Amendments (final rule), 87 FR 52224, PHMSA, via Federal Register](https://www.federalregister.gov/documents/2022/08/24/2022-17031/pipeline-safety-safety-of-gas-transmission-pipelines-repair-criteria-integrity-management), 2022-08-24
7. [Pipeline Safety: Periodic Updates of Regulatory References to Technical Standards and Miscellaneous Amendments (final rule), 89 FR 33264, PHMSA, via Federal Register](https://www.federalregister.gov/documents/2024/04/29/2024-08624/pipeline-safety-periodic-updates-of-regulatory-references-to-technical-standards-and-miscellaneous), 2024-04-29
8. [Pipeline Safety: Class Location Change Requirements (final rule), 91 FR 1608, PHMSA, via Federal Register](https://www.federalregister.gov/documents/2026/01/14/2026-00566/pipeline-safety-class-location-change-requirements), 2026-01-14
9. [Pipeline Safety: Repair Criteria for Hazardous Liquid and Gas Transmission Pipelines (notice of proposed rulemaking), 91 FR 42272, PHMSA, via Federal Register](https://www.federalregister.gov/documents/2026/07/08/2026-13805/pipeline-safety-repair-criteria-for-hazardous-liquid-and-gas-transmission-pipelines), 2026-07-08
10. [Pipeline Safety, Railroad Commission of Texas](https://www.rrc.texas.gov/pipeline-safety/)
11. [40 CFR 68.10, Applicability, eCFR, US Office of the Federal Register](https://www.ecfr.gov/current/title-40/chapter-I/subchapter-C/part-68/subpart-A/section-68.10)

Published by Winda Beacon (https://beacon.winda.ai).
