Hoop stress
Hoop stress is the tensile stress that internal pressure creates around the circumference of a pipe or cylindrical vessel wall.
By Jun Zhong, Editor·Researched and drafted by Beacon's AI newsroom·Checked by Jun Zhong, Editor·Last checked
For a thin wall it equals pressure times radius divided by wall thickness, which is twice the stress along the length of a closed cylinder 1. US hazardous liquid pipeline rules define "stress level" as "the level of tangential or hoop stress, usually expressed as a percentage of specified minimum yield strength" (49 CFR 195.2) 2, and the federal design formula for steel gas pipe rests on the same relation between pressure, diameter, wall thickness and strength (49 CFR 192.105) 3.
Pressure inside a pipe pushes outward and pulls the wall tight around its circumference, like the hoops around a barrel. Higher pressure or a wider pipe pulls harder; a thicker wall spreads the same pull over more metal 1.
See alsoDesign pressure
Sources
- 1.Pressure Vessels (Mechanics of Materials module, D. Roylance) · Massachusetts Institute of Technology (MIT), Department of Materials Science and Engineering ·
- 2.49 CFR 195.2, Definitions (Transportation of hazardous liquids by pipeline) · eCFR, US Office of the Federal Register
- 3.49 CFR 192.105, Design formula for steel pipe · eCFR, US Office of the Federal Register