Skip to content
Beaconby Winda
FactInspection, Testing and Monitoring · Inspection planning and data

On-stream inspection

·1 source

Short answer

On-stream inspection is inspection carried out while equipment stays in operation, from the outside, without shutting it down, draining it or entering it.

By , Editor·Researched and drafted by ·Checked by , Editor·Last checked

Readings, often wall thickness, are taken from outside while the plant runs. Hot surfaces limit safety and accuracy: investigating the 2012 Richmond, California refinery fire, the US Chemical Safety Board (CSB) found the refinery's inspection database treated pipe above 450 °F (about 232 °C) as too hot to inspect safely while running, and that thickness testing on hot pipe is hard to do accurately 1.

Sources

  1. 1.Final Investigation Report: Chevron Richmond Refinery Pipe Rupture and Fire, Report No. 2012-03-I-CA · US Chemical Safety and Hazard Investigation Board (CSB)