Skip to content
Beaconby Winda
FactAsset Integrity Management · Fitness-for-service

Remaining strength factor

·3 sources

Short answer

The remaining strength factor (RSF) is a ratio used in fitness-for-service work: the pressure at which a damaged component would collapse, divided by the pressure at which the same component would collapse undamaged.

By , Editor·Researched and drafted by ·Checked by , Editor·Last checked

This is how the US pipeline regulator's 2026 proposed rule describes the term as API 579 uses it 1. API 579-1/ASME FFS-1 is the joint fitness-for-service standard of API and ASME; its 4th edition is dated December 2021 3.

It is the share of original strength that a corroded or damaged part still has, so an RSF of 0.8 means 80 percent (illustrative number) 1.

US pipeline rules use a related ratio. The predicted failure pressure of a defect is calculated with a remaining strength method, such as ASME/ANSI B31G or R-STRENG, and then divided by the maximum pressure the line is allowed to run at. The regulator calls the result the failure pressure ratio; the closer it falls toward 1.0, the sooner the defect must be dealt with 1,2.

Sources

  1. 1.Pipeline Safety: Repair Criteria for Hazardous Liquid and Gas Transmission Pipelines, proposed rule, 91 FR 42272, document 2026-13805 · US Pipeline and Hazardous Materials Safety Administration (PHMSA), Federal Register ·
  2. 2.49 CFR 192.712, Analysis of predicted failure pressure and critical strain level · eCFR, US Office of the Federal Register
  3. 3.2025 Publications Catalog (entry for API 579-1/ASME FFS-1) (API 579-1/ASME FFS-1, 4th edition, December 2021) · American Petroleum Institute (API)