Skip to content
Beaconby Winda
FactInspection, Testing and Monitoring · Inspection planning and data

Baseline inspection

·4 sources

Short answer

A baseline inspection is the first recorded inspection of equipment or pipe, which sets the reference condition that later inspections are compared with.

By , Editor·Researched and drafted by ·Checked by , Editor·Last checked

It records measured values such as wall thickness and can be done before start-up (pre-service) or at the first inspection after start-up 1. In US pipeline integrity rules the matching term is baseline assessment: the first integrity assessment of each covered segment, planned under 49 CFR 192.919 and 195.452 2,4. New gas transmission pipe in a covered segment must have it within 10 years of installation (49 CFR 192.921(g)), and a new hazardous liquid pipeline before it begins operation (49 CFR 195.452(d)) 3,4.

It is the "before" picture. If later readings are compared with the nominal (catalog) thickness instead of a measured starting value, calculated corrosion rates can carry significant errors, either hiding real thinning or showing thinning that is not there 1.

See alsoHigh consequence areaOn-stream inspection

Sources

  1. 1.The Importance of Mechanical Integrity Inspection for Successful Capital Projects (P. F. Schubert), presentation abstract · American Institute of Chemical Engineers (AIChE), Spring Meeting and Global Congress on Process Safety ·
  2. 2.49 CFR 192.919, What must be in the baseline assessment plan? · eCFR, US Office of the Federal Register
  3. 3.49 CFR 192.921, How is the baseline assessment to be conducted? · eCFR, US Office of the Federal Register
  4. 4.49 CFR 195.452, Pipeline integrity management in high consequence areas · eCFR, US Office of the Federal Register