Skip to content
Beaconby Winda
FactEngineering Design and Materials · Design for integrity

Dead leg

·3 sources

Short answer

A dead leg is a section of process piping in which the fluid is stagnant or flows very little.

By , Editor·Researched and drafted by ·Checked by , Editor·Last checked

The UK Health and Safety Executive (HSE) uses this meaning in a 2019 safety alert on dead-leg ruptures 1, and some dead legs are connections left from construction for flushing, draining or pressure testing 2. US gas pipeline rules name a dead leg as one example of the low point that internal corrosion direct assessment must excavate and examine first (49 CFR 192.927) 3.

It is a branch of pipe where the fluid just sits. Water, deposits and corrosive material collect there, and temperature differences, liquid levels and condensation can thin the wall fast in one small spot that routine thickness checks miss 1,2.

Sources

  1. 1.Catastrophic rupture of dead-leg pipe-work (Safety alert, Bulletin No. CEMHD2-2019) · UK Health and Safety Executive (HSE) ·
  2. 2.Process Safety Beacon: Piping Dead Legs, Another Hazard in Plain Sight (Chemical Engineering Progress) · American Institute of Chemical Engineers (AIChE), Center for Chemical Process Safety (CCPS)
  3. 3.49 CFR 192.927, What are the requirements for using Internal Corrosion Direct Assessment (ICDA)? · eCFR, US Office of the Federal Register