Metal loss
Metal loss is a pipe wall anomaly in which material is missing from the surface, most often because of corrosion and sometimes because of gouging.
By Jun Zhong, Editor·Researched and drafted by Beacon's AI newsroom·Checked by Jun Zhong, Editor·Last checked
The US Pipeline and Hazardous Materials Safety Administration (PHMSA) uses this meaning in its public glossary and calls the resulting thinning "wall loss" 1. US onshore gas transmission rules require a remaining strength calculation, such as ASME B31G or RSTRENG, to predict failure pressure at corrosion metal loss (49 CFR 192.712(b)) 2. Gas and hazardous liquid integrity management rules both treat metal loss deeper than 80 percent of nominal wall as an immediate repair condition (49 CFR 192.933(d)(1)(iii) and 195.452(h)(4)(i)(A)) 3,4.
It is steel that is no longer there. In-line inspection tools, like magnetic flux leakage tools, find it from inside the pipe, and the size of the missing area decides how much pressure the thinner wall can still hold 1,2.
Sources
- 1.Stakeholder Communications: Glossary (entries Metal Loss, Wall Loss, Magnetic Flux Leakage, Inline Inspection) · US Pipeline and Hazardous Materials Safety Administration (PHMSA)
- 2.49 CFR 192.712, Analysis of predicted failure pressure and critical strain level · eCFR, US Office of the Federal Register
- 3.49 CFR 192.933, What actions must be taken to address integrity issues? · eCFR, US Office of the Federal Register
- 4.49 CFR 195.452, Pipeline integrity management in high consequence areas · eCFR, US Office of the Federal Register