Minimum design metal temperature (MDMT)
Minimum design metal temperature (MDMT) is the lowest metal temperature permitted for a pressure vessel by its construction code.
By Jun Zhong, Editor·Researched and drafted by Beacon's AI newsroom·Checked by Jun Zhong, Editor·Last checked
Also called MDMT
In a 2013 interpretation, the US Pipeline and Hazardous Materials Safety Administration (PHMSA) described it as the lowest temperature the American Society of Mechanical Engineers (ASME) Code permits, and noted that it is generally not the same as the lowest temperature in a cargo tank's marked design temperature range 1. It belongs to a vessel's design data 4 and appears on the nameplate with the pressure it applies to 2; US Coast Guard rules require it in the stamping of marine pressure vessels when below -18 °C (0 °F) (46 CFR 54.10-20) 3.
Many steels that bend when warm can crack suddenly when cold, because their toughness falls as temperature drops 2. This number tells operators how cold the vessel wall may get while the vessel is in service.
See alsoDesign pressure
Sources
- 1.Interpretation 12-0144 (49 CFR 178.337-17, cargo tank marking and MDMT) · US Pipeline and Hazardous Materials Safety Administration (PHMSA) ·
- 2.NIST Special Publication 780, Guidelines for Pressure Vessel Safety Assessment (S. Yukawa) · US National Institute of Standards and Technology (NIST)
- 3.46 CFR 54.10-20, Marking and stamping · eCFR, US Office of the Federal Register
- 4.OSHA Technical Manual, Section IV, Chapter 3: Pressure Vessel Guidelines · US Occupational Safety and Health Administration (OSHA)