Skip to content
Beaconby Winda
FactProcurement and Supply Chain · Bidding and bid evaluation

ITB vs RFQ vs RFP in oil and gas procurement

·11 sources

Short answer

An invitation to bid (ITB) seeks firm bids to a specification; a request for quotation (RFQ) seeks prices; a request for proposal (RFP) seeks solutions. Under US federal rules, sealed bids are awarded on price among conforming bids, proposals can trade price against technical merit, and a quotation is not an offer (48 CFR 2.101).

By , Editor·Researched and drafted by ·Checked by , Editor·Last checked ·Next review

Why does it matter?

A quotation is not an offer: under US federal rules the buyer cannot accept a quotation to form a binding contract, so the buyer's order becomes the offer and the contract exists only once the supplier accepts it, in writing or by delivering or substantially performing 2. A bid or a proposal, by contrast, binds the bidder if accepted 1. The type of solicitation therefore decides who is committed, when, and whether the buyer may negotiate before award 1,3,4.

ITB vs RFQ vs RFP at a glance

These definitions come from public procurement rules, the US Federal Acquisition Regulation (FAR, 48 CFR) and the World Bank Procurement Regulations, used here to define terms; private oil and gas companies set their own procedures. FAR is cited as codified on 22 October 2026; many agencies apply rewritten Parts 13 to 15 (September 2025) as deviations 6.

ITB (invitation to bid)RFQ (request for quotation)RFP (request for proposal)
Name in US federal rulesInvitation for bids (IFB), sealed bidding, FAR Part 14Request for quotations, simplified acquisition, FAR Part 13Request for proposals, negotiation, FAR Part 15
Name in World Bank rulesRequest for bids (RFB)Request for quotations (RFQ)Request for proposals (RFP)
What the buyer providesA clear, accurate and complete description of the requirementDescription, quantity, delivery period and placeRequirement, terms, proposal content, evaluation factors and their relative importance
The responseA bid, which is an offerA quotation, which is not an offerA proposal, which is an offer
Exchanges after submissionNone; bids are evaluated without discussionsEvaluation procedure left to the contracting officer; Part 14 and 15 steps optionalClarifications, and discussions with offerors in the competitive range
Basis of awardPrice and price-related factors, among conforming bids from responsible biddersPrice alone, or price and other factors, as the request statesBest value, by tradeoff or by lowest price technically acceptable
Typical fitRequirements the buyer can specify in detailLimited quantities of off-the-shelf or standard items, small simple worksComplex needs where offers may differ in how they meet or exceed the requirement
Stages (World Bank)Single stageComparison of quotationsNormally multistage

Sources: 48 CFR 2.101, Parts 13, 14 and 15 1,2,3,4; World Bank Procurement Regulations, Seventh Edition, 2025, paragraphs 6.2 to 6.7 and Annex XII 7.

When is an ITB used?

  • When price decides and no talks are needed. US federal rules require sealed bids when time allows, award will rest on price and price-related factors, discussions are unnecessary and more than one bid is expected 5.
  • When the buyer can write a complete specification. The World Bank describes its request for bids as the method for cases where the buyer can specify detailed requirements and bidders respond to them 7.
  • For fixed prices. US sealed bidding uses firm-fixed-price contracts, or fixed-price contracts with economic price adjustment where allowed 3.

In engineering, procurement and construction (EPC) work, the owner's bidding package is also called an invitation to bid: a 2021 study of contractor risk analyzed 25 ITB documents from offshore, onshore plant and infrastructure projects 8. When a specification is not yet complete, US rules allow two-step sealed bidding, with unpriced technical proposals first and sealed priced bids from acceptable offerors second 3.

When is an RFQ used?

  • For small or simple purchases. US simplified acquisition procedures apply up to the simplified acquisition threshold, $350,000 as of 22 October 2026 for most purchases 1,2.
  • For standard items. The World Bank describes RFQ as comparing price quotations for limited quantities of off-the-shelf goods, standard specification commodities or simple small works, normally from at least three firms 7.
  • When evaluation can be light. US contracting officers have broad discretion over how quotations are evaluated, but must tell suppliers whether award rests on price alone or on price and other factors 2.

Because a quotation is not an offer, the order placed in response is the buyer's offer, and the buyer may withdraw or change it until the supplier accepts 2. Under World Bank rules, the terms of the accepted quotation go into a binding contract document 7.

When is an RFP used?

  • When sealed bidding does not fit. US rules allow competitive proposals when sealed bids are not appropriate 5.
  • When requirements are less defined or riskier. The FAR notes that vaguer requirements, more development work and higher performance risk all shift weight from price toward technical and past performance factors 4.
  • When offers may differ. The World Bank uses RFP where proposers can offer customized solutions that vary in how they meet or exceed the requirement, evaluated with rated criteria 7.

An RFP must state the factors and significant subfactors used in evaluation and their relative importance 4. Before an RFP, a buyer may issue a request for information (RFI) to gather price, delivery or capability data for planning; responses to an RFI are not offers 4.

Where integrity problems show up

Decision or step at this stageWhat it affects laterIn the Library
Spare parts or maintenance materials are bought by quotation on priceUS process safety rules require them to be suitable for the process application; at a refinery in Texas City, Texas, in 2005, a carbon steel elbow fitted where 1.25% chromium steel was required failed after fewer than 3,000 hours 9,10What is positive material identification (PMI)?
Material certificates and test records are not listed in the solicitation, of whatever typeWhere required, US onshore steel gas transmission operators without traceable, verifiable and complete records must verify material properties through tests and examinations 11What is a mill test certificate (EN 10204 3.1 and 3.2)?, What is material traceability?
A proposal with different materials or design is acceptedProcess safety information must record materials of construction and design codes, and a pre-startup safety review checks equipment against the design specifications 9What is vendor document management?

Sources: 29 CFR 1910.119(d), (i), (j)(6) 9; CSB Safety Bulletin 2005-04-B, 2006 10; 49 CFR 192.607 11.

Common questions

Is an ITB the same as an IFB or an RFB?
In substance, yes. The FAR calls the sealed bid solicitation an invitation for bids, and the World Bank calls its single-stage bid solicitation a request for bids. Private companies choose their own names.
Is a quotation binding?
Not by itself. Under US federal rules a contract forms only when the supplier accepts the buyer's order, for example in writing, by delivering, or by substantial performance.
Can an ITB be used for complex equipment?
Yes, through two-step sealed bidding, which US rules describe as especially useful for complex items needing technical proposals. See [What is technical bid evaluation in oil and gas?](/library/technical-bid-evaluation/)

Beacon explains these concepts in its own words for education. It does not reproduce or replace the standards cited, and Winda is not affiliated with or endorsed by the organizations that publish them. Engineering decisions need the current edition of the standard and a qualified engineer.

Sources

  1. 1.48 CFR 2.101, Definitions (FAR 2.101) · eCFR, US Office of the Federal Register
  2. 2.48 CFR Part 13, Simplified Acquisition Procedures (FAR Part 13) · eCFR, US Office of the Federal Register
  3. 3.48 CFR Part 14, Sealed Bidding (FAR Part 14) · eCFR, US Office of the Federal Register
  4. 4.48 CFR Part 15, Contracting by Negotiation (FAR Part 15) · eCFR, US Office of the Federal Register
  5. 5.48 CFR 6.401, Sealed bidding and competitive proposals (FAR 6.401) · eCFR, US Office of the Federal Register
  6. 6.FAR Overhaul: FAR Part Deviation Guidance · Acquisition.gov, US General Services Administration
  7. 7.Procurement Regulations for IPF Borrowers (Seventh Edition), Section VI and Annex XII · The World Bank
  8. 8.AI and Text-Mining Applications for Analyzing Contractor's Risk in Invitation to Bid (ITB) and Contracts for Engineering Procurement and Construction (EPC) Projects (S.J. Choi, S.W. Choi, J.H. Kim, E.-B. Lee), Energies 14(15), 4632 · MDPI (peer-reviewed journal); authors at Pohang University of Science and Technology (POSTECH) ·
  9. 9.29 CFR 1910.119, Process safety management of highly hazardous chemicals · eCFR, US Office of the Federal Register
  10. 10.Safety Bulletin No. 2005-04-B, BP Texas City, TX Refinery Fire: Positive Material Verification: Prevent Errors During Alloy Steel Systems Maintenance · US Chemical Safety and Hazard Investigation Board (CSB) ·
  11. 11.49 CFR 192.607, Verification of pipeline material properties and attributes: Onshore steel transmission pipelines · eCFR, US Office of the Federal Register