Coating holiday
A coating holiday is a gap or break in a protective coating that leaves bare metal exposed to the surrounding soil, water or air.
By Jun Zhong, Editor·Researched and drafted by Beacon's AI newsroom·Checked by Jun Zhong, Editor·Last checked
The US Pipeline and Hazardous Materials Safety Administration (PHMSA) glossary and a 1985 US Army cathodic protection manual both use this meaning 1,2. US pipeline rules require external coating to be inspected just before the pipe is lowered into the ditch, with damage repaired (49 CFR 192.461(c) and 195.561), and list "holiday inspection" reports among gas integrity data (49 CFR 192.917(b)) 3,4,5. Since 2022, onshore gas transmission operators must also survey coating with voltage gradient methods within 6 months after backfilling 1,000 feet or more of repaired or replaced pipe (49 CFR 192.461(f)) 3.
It is a bare spot in a pipe's wrap or paint where corrosion can start. Cathodic protection is sized to protect the steel that such gaps leave exposed 1,2.
See alsoPipe-to-soil potential
Sources
- 1.Stakeholder Communications: Glossary (entries Holiday, Protective Coating) · US Pipeline and Hazardous Materials Safety Administration (PHMSA)
- 2.TM 5-811-7, Electrical Design, Cathodic Protection (Technical Manual) · Headquarters, US Department of the Army (hosted by the Whole Building Design Guide) ·
- 3.49 CFR Part 192, Subpart I, Requirements for Corrosion Control (192.461 External corrosion control: Protective coating) · eCFR, US Office of the Federal Register
- 4.49 CFR 192.917, How does an operator identify potential threats to pipeline integrity and use the threat identification in its integrity program? · eCFR, US Office of the Federal Register
- 5.49 CFR Part 195, Subpart H, Corrosion Control (195.561 When must I inspect pipe coating used for external corrosion control?) · eCFR, US Office of the Federal Register