Skip to content
Beaconby Winda
FactAsset Integrity Management · Risk-based inspection

Consequence of failure

·2 sources

Short answer

Consequence of failure (CoF) is the outcome expected if equipment fails, normally by loss of containment, assessed separately from how likely that failure is; in risk-based inspection (RBI) it is one of the two inputs that make up risk.

By , Editor·Researched and drafted by ·Checked by , Editor·Last checked

A 2026 open-access paper describes consequence analysis as working out the potential impact of a failure scenario on people, the environment and property, sometimes expressed as a loss of money 1.

It answers how bad a failure would be, not how likely it is. The same paper notes that the analysis can use models of releases, fires, explosions and toxic exposure, or can be done qualitatively with a severity index 1.

US gas pipeline rules apply the same idea to decide where integrity management is required: 49 CFR 192.903 defines a high consequence area by class location, or by the potential impact circle around the pipe and the occupied buildings and sites inside it 2.

See alsoProbability of failureRisk matrixHigh consequence area

Sources

  1. 1.Toward the application of the Risk-Based Maintenance approach to a hydrogen-fueled manufacturing plant (G. Collina and others), International Journal of Hydrogen Energy 238, 155318, open access under CC BY 4.0 · Elsevier, via OSTI.gov (co-authored by the US National Laboratory of the Rockies)
  2. 2.49 CFR 192.903, What definitions apply to this subpart? · eCFR, US Office of the Federal Register