Skip to content
Beaconby Winda
FactAsset Integrity Management · Risk-based inspection

Probability of failure

·2 sources

Short answer

Probability of failure (PoF), also called likelihood of failure, is the chance that a component fails, usually by loss of containment, within a stated period; risk-based inspection (RBI) combines it with consequence of failure to give risk.

By , Editor·Researched and drafted by ·Checked by , Editor·Last checked

A 2026 open-access paper describes the API approach to it as a generic failure frequency, taken from historical data, combined with a factor for the damage mechanisms acting on the item 1.

It is how likely a piece of equipment is to leak or break. It tends to rise with time in service as corrosion, fatigue and similar damage progress 1.

The estimate depends on the data behind it. After a heat exchanger ruptured at Anacortes, Washington, in 2010, the US Chemical Safety and Hazard Investigation Board (CSB) found that reviews based on design conditions, not actual ones, had not identified the damage that caused the rupture as credible 2.

See alsoConsequence of failureGeneric failure frequencyDamage factorProbability of detection (POD)

Sources

  1. 1.Toward the application of the Risk-Based Maintenance approach to a hydrogen-fueled manufacturing plant (G. Collina and others), International Journal of Hydrogen Energy 238, 155318, open access under CC BY 4.0 · Elsevier, via OSTI.gov (co-authored by the US National Laboratory of the Rockies)
  2. 2.Investigation Report: Catastrophic Rupture of Heat Exchanger (Seven Fatalities), Tesoro Anacortes Refinery, Anacortes, Washington, April 2, 2010, Report 2010-08-I-WA · US Chemical Safety and Hazard Investigation Board (CSB)