Generic failure frequency
A generic failure frequency is a baseline estimate of how often a type of equipment fails, taken from historical failure data for equipment of that type, before anything specific to one item is considered.
By Jun Zhong, Editor·Researched and drafted by Beacon's AI newsroom·Checked by Jun Zhong, Editor·Last checked
A 2026 open-access paper describes the API risk-based inspection approach as combining this baseline with a factor for the damage mechanisms acting on the item 1. API RP 581, Risk-Based Inspection Methodology, is API's quantitative method for that approach 3.
It is the industry average for a vessel or a pipe of this kind. Your item may be better or worse. The same paper notes that real likelihood of failure tends to rise with time in service as corrosion, fatigue and other damage progress, so a generic figure alone leaves time-dependent damage out 1.
The same idea appears in pipeline risk models. A 2015 safety study by the US National Transportation Safety Board (NTSB) describes relative risk models that draw on historical failure experience, known or estimated pipeline characteristics and expert input to score each threat on a segment 2.
See alsoDamage factorProbability of failureRisk matrix
Sources
- 1.Toward the application of the Risk-Based Maintenance approach to a hydrogen-fueled manufacturing plant (G. Collina and others), International Journal of Hydrogen Energy 238, 155318, open access under CC BY 4.0 · Elsevier, via OSTI.gov (co-authored by the US National Laboratory of the Rockies)
- 2.Integrity Management of Gas Transmission Pipelines in High Consequence Areas, Safety Study NTSB/SS-15/01 · US National Transportation Safety Board (NTSB)
- 3.2025 Publications Catalog (entry for API RP 581) · American Petroleum Institute (API)