Injection point
An injection point is a place where water, a chemical or another stream is fed into a process line, for example wash water or a neutralizer.
By Jun Zhong, Editor·Researched and drafted by Beacon's AI newsroom·Checked by Jun Zhong, Editor·Last checked
Wash water dissolves salts that would otherwise foul equipment 1; neutralizer stops a crude tower overhead from turning acidic 2. The piping just downstream can thin fast 1, and the 2007 refinery emphasis program of the US Occupational Safety and Health Administration (OSHA) checks that employers set thickness measurement locations at injection points and the piping near them 3.
It is where something is added to the flow; the pipe just after it is a known weak spot. In the 2001 Humber refinery explosion in England, an elbow 670 mm downstream of a water injection point added after commissioning thinned from about 7 to 8 mm to 0.3 mm and burst; the injected water had washed away a protective iron sulfide layer 1.
See alsoCorrosion circuit
Sources
- 1.Public Report of the Fire and Explosion at the ConocoPhillips Humber Refinery on 16 April 2001 (copy hosted by the Institution of Chemical Engineers) · UK Health and Safety Executive (HSE)
- 2.Prevent Corrosion and Ensure Reliability (J. Danis), Chemical Engineering Progress · American Institute of Chemical Engineers (AIChE)
- 3.Petroleum Refinery Process Safety Management National Emphasis Program (CPL 03-00-004) · US Occupational Safety and Health Administration (OSHA)