What is an approved vendor list (AVL)?
An approved vendor list (AVL) is a buyer's list of suppliers or manufacturers already evaluated and accepted for specific items or services. US federal acquisition rules use the same idea in qualified products, manufacturers and bidders lists under Federal Acquisition Regulation (FAR) Subpart 9.2, where qualification is generally done in advance and independently of any one purchase.
By Jun Zhong, Editor·Researched and drafted by Beacon's AI newsroom·Checked by Jun Zhong, Editor·Last checked ·Next review
Why does it matter?
Being on an approved list does not show that the next delivery meets the specification. FAR requires agencies to tell list users that a listing is not an endorsement and does not release the supplier from complying with the specification 1. Research by the Construction Industry Institute (CII) makes the same point for construction materials: conformance to requirements is the supplier's responsibility, while the quality cycle still calls for quality checks on receipt and for surveillance and inspection at a level the project chooses 3. In its 2006 bulletin on a 2005 refinery fire in Texas City, Texas, the US Chemical Safety Board (CSB) noted that the site's procedure required alloy steel parts to be checked on receipt at the warehouse and again when issued for new construction 4.
How do public rules define qualified lists?
This page uses US federal rules to define terms. FAR defines a qualification requirement as testing or another quality assurance demonstration that has to be completed before a contract is awarded 2. It then names three kinds of list 1,2:
| List | What is on it | Basis |
|---|---|---|
| Qualified products list (QPL) | Products examined and tested that meet all applicable qualification requirements | FAR 2.101 2 |
| Qualified manufacturers list (QML) | Manufacturers whose products have been examined and tested and meet the requirements | FAR 9.201 1 |
| Qualified bidders list (QBL) | Bidders whose products have been examined and tested, or who otherwise meet the requirements | FAR 9.201 1 |
Sources: FAR 2.101 and Subpart 9.2, as amended to March 2026 1,2.
The rules also limit how lists are used. Before an agency sets a qualification requirement it must write down why the requirement is needed before award, estimate what qualifying will cost suppliers, and specify only the least restrictive requirements that serve the purpose 1. A list must stay open to new products and sources, and a supplier that is refused must be told why 1. Each qualification requirement has to be re-examined and revalidated within 7 years 1.
How does a supplier get on, and off, the list?
Under FAR, getting on a list means having the product or the manufacturer examined and tested against the specification, or being given the chance to demonstrate the ability to meet the qualification standard 1. A supplier that is not listed but shows before award that it meets the standard cannot be refused the chance to have its offer considered solely because it is not listed 1.
FAR names the events that trigger re-examination or removal from a list 1:
| Trigger | FAR reference |
|---|---|
| The manufacturer changes the product, material or processing enough to question the earlier qualification | 9.204(i)(1) |
| The specification is revised in a way that affects the product | 9.204(i)(2), 9.207(a)(7) |
| Delivered products fail the qualification requirement, or rejected defects are not corrected | 9.207(a)(1) and (2) |
| The plant moves or changes owner and the supplier does not ask for re-evaluation | 9.207(a)(3) |
| Manufacture of the product stops | 9.207(a)(4) |
| The source is excluded from federal awards | 9.207(a)(9) |
| Contract performance is otherwise unsatisfactory | 9.207(a)(10) |
Source: FAR 9.204 and 9.207, as amended to March 2026 1.
The World Bank applies a time limit to its own shortlists: if more than 12 months pass between the prequalification decision and the request for bids, the Bank may require a new prequalification 8.
What external lists exist in oil and gas?
The American Petroleum Institute (API) publishes the API Composite List, an online directory of companies licensed to apply the API Monogram to products and of organizations registered to API Spec Q1, API Spec Q2, ISO 9001 and other management system standards 6. API states that licensees and registrants undergo on-site audits by API auditors to become and stay licensed or registered, and that the directory shows each company's current status 6.
As of October 2026, API puts the number of organizations holding its certifications at over 4,300, spread across 75 countries 7. API also describes API Spec Q1 as meeting most ISO 9001 requirements, with added requirements aimed at the oil and natural gas industry 7. A buyer's own approved vendor list is a separate decision; how a supplier is evaluated first is covered in How are suppliers prequalified for oil and gas projects?.
Where integrity problems show up
| Decision or step at this stage | What it affects later | In the Library |
|---|---|---|
| Accepting product without knowing where or to what specification it was made | At San Bruno, California, the pipe pieces that ruptured in 2010 met no known specification and came from an undetermined facility; the defective pipe went undetected for 54 years 5 | What is material traceability? |
| Relying on the listing instead of checking deliveries | A listing does not release the supplier from the specification 1; at Texas City in 2005, a carbon steel elbow in hydrogen piping that called for 1.25% chromium steel ruptured after about three months 4 | What is positive material identification (PMI)? |
| Keeping a supplier listed after it changes material, process, plant or owner | FAR requires re-examination because the earlier qualification may no longer be valid 1 | How is fabrication quality controlled for pressure equipment? |
| Requiring certificates and records from listed suppliers | Records of diameter, wall thickness, seam type and grade on gas transmission pipelines must be traceable, verifiable and complete for the life of the line, or be verified by testing 9 | What is a mill test certificate (EN 10204 3.1 and 3.2)? |
Sources: US National Transportation Safety Board (NTSB) report PAR-11/01, 2011 5; CSB safety bulletin 2005-04-B, 2006 4; FAR Subpart 9.2 1; 49 CFR 192.607 9.
Common questions
- Is an approved vendor list the same as prequalification?
- No. Prequalification is the evaluation; the list is the standing result. The World Bank uses prequalification to shortlist applicants for a specific procurement, while FAR qualification is generally done in advance and independently of any one purchase.
- Can a supplier that is not on the list still bid?
- Under FAR, yes, if it can show the contracting officer before award that it or its product meets the qualification standard. Private buyers set their own rules.
- Does an API license or registration put a company on a buyer's list?
- Not by itself. The API Composite List shows a company's license or registration status; a buyer's approved vendor list results from the buyer's own evaluation.
Beacon explains these concepts in its own words for education. It does not reproduce or replace the standards cited, and Winda is not affiliated with or endorsed by the organizations that publish them. Engineering decisions need the current edition of the standard and a qualified engineer.
Sources
- 1.FAR Subpart 9.2, Qualifications Requirements · Acquisition.gov, Federal Acquisition Regulation (FAC 2026-01, effective 2026-03-13) ·
- 2.FAR 2.101, Definitions (qualification requirement, qualified products list) · Acquisition.gov, Federal Acquisition Regulation (FAC 2026-01, effective 2026-03-13) ·
- 3.Procurement and Materials Management: A Guide to Effective Project Execution (IR7-3), publication page with key findings · Construction Industry Institute (CII), The University of Texas at Austin ·
- 4.Safety Bulletin No. 2005-04-B: BP Texas City, TX Refinery Fire, Positive Material Verification: Prevent Errors During Alloy Steel Systems Maintenance · US Chemical Safety and Hazard Investigation Board (CSB) ·
- 5.Pacific Gas and Electric Company Natural Gas Transmission Pipeline Rupture and Fire, San Bruno, California, September 9, 2010 (Pipeline Accident Report NTSB/PAR-11/01) · US National Transportation Safety Board (NTSB)
- 6.Directory of Licensed/Registered Companies (API Composite List) · American Petroleum Institute (API)
- 7.API Quality Certifications (API Monogram and APIQR) · American Petroleum Institute (API)
- 8.Procurement Regulations for IPF Borrowers: Procurement in Investment Project Financing, Seventh Edition · The World Bank
- 9.49 CFR 192.607, Verification of Pipeline Material Properties and Attributes: Onshore steel transmission pipelines · eCFR, US Office of the Federal Register