Skip to content
Beaconby Winda
FactAsset Integrity Management · Integrity, reliability and APM

Asset integrity vs reliability vs asset performance management

·8 sources

Short answer

Asset integrity is about keeping equipment able to contain hazardous fluids and keeping safety systems ready, so that major accidents are prevented. Reliability is about how long equipment runs without failing. Asset performance management (APM) combines condition, reliability and integrity data to decide work. ISO 55000 describes the wider asset management system they serve.

By , Editor·Researched and drafted by ·Checked by , Editor·Last checked ·Next review

Why does it matter?

Plant that is treated as only a reliability matter can still weaken safety barriers. When the UK Health and Safety Executive (HSE) inspected nearly 100 offshore installations between 2004 and 2007 under its Key Programme 3 (KP3), it rated the state of plant as poor on more than half of them, and companies often defended this by saying the plant was not safety-critical 1. HSE pointed out that degraded utility and other non-critical systems can reduce the performance of safety-critical elements during a major accident 1. The same programme found that the role of asset integrity and of barriers in major hazard control was not well understood across the industry 1.

Asset integrity vs reliability vs APM at a glance

The three terms overlap: the Center for Chemical Process Safety (CCPS) puts integrity and reliability in one element, while in practice they are often run as separate programs 2,5. The table sets out how public sources use each one.

Asset integrityReliabilityAsset performance management (APM)
Core questionWill the equipment hold its contents, and will safety systems work on demand?How long will the equipment keep working before it fails?Which work, across many assets, gives the best balance of availability, risk and cost?
Public definitionHSE: "the ability of an asset to perform its required function effectively and efficiently whilst protecting health, safety and the environment" 1The US National Institute of Standards and Technology (NIST) describes reliability as quality over time: whether items still meet specification after a period of use 3ARC Advisory Group: hardware, software and services that help physical assets stay available and fail less often, at lower risk and running cost 4
Main harm it guards againstRelease of hazardous material or energy, and safety systems that fail when called on 1,2Failures in service, from nuisance stoppages to serious harm 3Both, weighed against cost 4
Typical measuresSafety-critical maintenance backlog, deferrals, test results against performance standards 1Failure rate over time, from a life distribution model; repair rate for repairable systems 3Asset health, reliability analytics, work orders and integrity status brought together 4
Main driverMajor hazard regulation, for example US process safety rules on mechanical integrity 7Business performance; reliability programs grew up apart from regulatory mechanical integrity programs 5Business and risk decisions across the asset base 4
How the bodies group themThe Center for Chemical Process Safety (CCPS) risk based process safety model has a single element called asset integrity and reliability 2Same CCPS element; often run as a separate program in practice 2,5ARC counts asset integrity management as one of five APM domains 4

Sources: HSE KP3 report, 2007 1; CCPS 2; NIST/SEMATECH e-Handbook 3; ARC Advisory Group 4; American Institute of Chemical Engineers (AIChE) conference paper, 2023 5; 29 CFR 1910.119(j) 7.

When is asset integrity the focus?

  • Equipment that could release hazardous material or energy, and systems that must work in an emergency. CCPS describes the work as systematic inspections and tests that keep important equipment suitable for its purpose until it is retired 2.
  • Where regulation sets duties. US process safety rules require written procedures, training, inspection and testing, correction of deficiencies and quality assurance for pressure vessels and storage tanks, piping, relief and vent systems, emergency shutdown systems, controls and pumps 7.
  • Across the whole life of the asset. HSE treats asset integrity management as the way an operator assures that the right people, management systems, processes and resources for integrity exist, are actually used and stay dependable through the asset's life 1. See What is asset integrity management in oil and gas?.

When is reliability the focus?

  • Setting maintenance and test intervals. HSE notes that intervals often start from reliability estimates based on manufacturers' data, which can be conservative, and can be lengthened when operating history supports it 1.
  • Quantifying failures over time. Reliability methods model the fraction of a population that fails as it ages, and for repairable systems they track how often failures recur 3. Reliability and integrity meet in safety systems. HSE's offshore programme linked maintenance of safety-critical elements directly to their availability and reliability, asking whether they would work when required 1.

When is asset performance management the focus?

  • When many assets compete for the same people, budget and shutdown windows, and decisions need condition, reliability and integrity data side by side 4.
  • When condition monitoring and analytics are added. ARC's five APM domains are plant asset management (monitoring condition with field device and sensor data), asset reliability analytics drawing on maintenance and historian data, enterprise asset management (work orders, materials and labor), field service management (contracted maintenance) and asset integrity management 4.
  • When equipment history must be trended. HSE's 2011 to 2013 ageing inspections, Key Programme 4 (KP4), found that data trending needed to improve to forecast failures of safety-critical elements 8. See What is asset performance management (APM)?.

Where integrity problems show up

DecisionData it depends onWhat goes wrong without it
Classing plant as safety-critical or notMajor accident scenarios and the role each system plays in themPlant called non-critical was left in poor condition on more than half of inspected UK offshore installations, although it can weaken safety-critical elements in an accident 1
Lengthening a maintenance or test intervalFailure and test history for that equipmentHSE found that reduced maintenance of temporary refuge ventilation led to longer test intervals, lower reliability and more failures; 64% of its shutdown tests on these systems scored red or amber 1
Setting turnaround work scopeInspection data from representative points, and metallurgical adviceBefore the 2012 Richmond, California, refinery fire, readings taken on high-silicon fittings suggested the line could run to 2016, and requests to inspect every component or replace the piping were turned down 6
Reporting integrity status to senior managersIndicators for safety-critical backlog, deferrals and test resultsHSE found management monitoring tilted toward occupational injury data, and many senior managers making little use of integrity data 1
Trending equipment performanceA history tied to each physical itemTagging by functional location means a replacement pump takes the old tag, so traceability is lost and the histories can be confused, which makes trending difficult 8

Sources: HSE KP3 report, 2007 1; US Chemical Safety and Hazard Investigation Board (CSB) final report on the 2012 Richmond refinery fire, 2015 6; HSE KP4 report, 2014 8.

Common questions

Is reliability part of asset integrity?
CCPS treats them as one element, asset integrity and reliability, aimed at preventing releases and keeping critical safety and utility systems available. Many companies still run them as separate programs; a 2023 AIChE paper links this to mechanical integrity programs having been built as stand-alone regulatory systems.
Is mechanical integrity the same as asset integrity?
Not quite. Mechanical integrity is the US process safety element in 29 CFR 1910.119(j), which applies to a listed set of equipment types. Asset integrity, as HSE uses it, also covers the people, systems and resources behind that equipment over its whole life. See [What is mechanical integrity (MI)?](/library/mechanical-integrity).
Where does ISO 55000 fit?
ISO 55000:2024 sets out the vocabulary, overview and principles for managing assets over their life cycle to realize value, and ISO lists better management of asset risk among the benefits. See [What is ISO 55000 (asset management)?](/library/iso-55000).

Beacon explains these concepts in its own words for education. It does not reproduce or replace the standards cited, and Winda is not affiliated with or endorsed by the organizations that publish them. Engineering decisions need the current edition of the standard and a qualified engineer.

Sources

  1. 1.Key Programme 3: Asset Integrity Programme · UK Health and Safety Executive (HSE), Offshore Division
  2. 2.Introduction to Asset Integrity and Reliability · American Institute of Chemical Engineers (AIChE), Center for Chemical Process Safety (CCPS)
  3. 3.NIST/SEMATECH e-Handbook of Statistical Methods, Chapter 8: Assessing Product Reliability (sections 8.1.1, 8.1.1.1, 8.1.2.1, 8.1.2.3) · US National Institute of Standards and Technology (NIST)
  4. 4.What Is Total Asset Performance Management? (glossary) · ARC Advisory Group
  5. 5.A Holistic Approach to Asset Risk Management: The Benefits of Combining Mechanical Integrity and Reliability Programs (R. Montgomery, N. Obando, T. Gilmer), paper 6a · AIChE, 2023 Spring Meeting and 19th Global Congress on Process Safety
  6. 6.Final Investigation Report: Chevron Richmond Refinery Pipe Rupture and Fire · US Chemical Safety and Hazard Investigation Board (CSB) ·
  7. 7.29 CFR 1910.119, Process safety management of highly hazardous chemicals, paragraph (j) Mechanical integrity · eCFR, US Office of the Federal Register
  8. 8.Key Programme 4 (KP4): Ageing and life extension programme · UK Health and Safety Executive (HSE), Energy Division