What is asset performance management (APM)?
Asset performance management (APM) combines condition, reliability, maintenance and integrity data to decide which work keeps assets available and safe. It is usually supported by software that adds condition monitoring and analytics, and it works within the asset management system described in the ISO 55000 series.
By Jun Zhong, Editor·Researched and drafted by Beacon's AI newsroom·Checked by Jun Zhong, Editor·Last checked ·Next review
Why does it matter?
Adding sensors and software does not by itself give a usable equipment history. In its 2011 to 2013 inspections of ageing offshore installations, Key Programme 4 (KP4), the UK Health and Safety Executive (HSE) found that maintenance systems usually identified equipment by functional location rather than by the physical item, so a replacement pump would carry the old pump's tag, traceability would be lost and the performance histories could be confused, which makes trending difficult 2. HSE also found key spreadsheets kept on local drives and much information held as free text, and it called for better data collection and trending to forecast residual life and avoid fixing equipment only after it fails 2.
What does APM include?
ARC Advisory Group, an industrial research firm, describes APM as hardware, software and services that help physical assets stay available and fail less often, at lower risk and running cost, and groups it into five domains 1.
| Domain | What it covers |
|---|---|
| Plant asset management | Watching equipment health to catch problems early, using smart field devices, control systems and sensors with analytics that predict faults |
| Asset reliability | Analytics on maintenance records and process historian data that find risk and improvement opportunities, weighing cost against risk |
| Enterprise asset management (EAM) | Asset information, work orders, spare parts, labor skills, service contracts, cost and analytics |
| Field service management | Maintenance done under contract for the owner by service companies or equipment suppliers |
| Asset integrity management | Preventing catastrophic release of hazardous material or energy, including keeping critical safety systems available |
Source: ARC Advisory Group, What Is Total Asset Performance Management? 1.
How does APM choose between maintenance strategies?
The US National Institute of Standards and Technology (NIST) describes three broad approaches 3:
- Reactive maintenance: repair after the equipment has failed or drifted out of quality or production targets, also called run-to-failure or corrective maintenance. 3
- Preventive maintenance: work on a fixed schedule, timer or cycle. 3
- Predictive maintenance: work triggered by predicted failure, using observed data such as temperature, noise and vibration; it is close to condition-based maintenance. 3
NIST's 2020 survey shows why the mix matters, within a stated scope: US discrete manufacturers in 2016, excluding petroleum and coal products and chemicals 3. On average 45.7% of machinery maintenance was reactive, and the quarter of plants that relied most on reactive work had 3.3 times the downtime and 16 times the defects of the quarter that relied on it least 3. NIST also notes that most published economic evidence for predictive maintenance comes from single-firm case studies with a wide range of values 3.
What data does APM depend on?
- Condition and process data from field devices, control systems and historians 1.
- Maintenance history in work order systems, tied to the physical item rather than only to a functional location 1,2.
- Inspection data from the right places, entered where it will be used. Before the 2012 Richmond, California, refinery fire, 19 condition monitoring locations covered the line but none sat on the low-silicon component that failed; corrosion found on that component in 2002 was never entered into the database's tracking, so it was not inspected again 5.
- Data managed as an asset. ISO 55013:2024 gives guidance on managing data so that it supports an organization's asset management objectives 6; ISO 55000:2024 provides the vocabulary and principles of the wider system 7.
How does APM relate to asset integrity?
Asset integrity management is one of the five APM domains in ARC's description, with its own aim of preventing major releases 1. Duties for that equipment do not move into the software. Under US process safety rules, for example, each inspection and test of covered equipment must be documented with the date, the person who did it, the equipment identifier, a description of the work and the results 8.
HSE's earlier offshore programme, Key Programme 3 (KP3), showed how integrity decisions can be lost in maintenance data: deferral records were often inadequate, and some deferred safety-critical equipment had been "lost" in maintenance system records for a long time 4. For machinery, American Petroleum Institute (API) Recommended Practice (RP) 691, Risk-Based Machinery Management (1st edition, June 2017), sets minimum requirements for managing health, safety and environmental risk of high-risk machinery across its life cycle 9. See Asset integrity vs reliability vs asset performance management.
Where integrity problems show up
| Decision | Data it depends on | What goes wrong without it |
|---|---|---|
| Choosing run-to-failure or planned maintenance | Failure modes, consequences and condition data | Plants relying most on reactive maintenance had 3.3 times the downtime of those relying least (US discrete manufacturing, 2016) 3 |
| Trending equipment condition | A history tied to each physical item | A replacement pump under the old tag loses traceability, and the two histories can be confused 2 |
| Forecasting remaining life before life extension | Trended performance data for safety-critical elements | HSE found missing data and too little trending to anticipate failures and obsolescence 2 |
| Deferring safety-critical maintenance | Risk assessment with engineering authority involved | Deferral records were inadequate and some deferred equipment went untracked 4 |
| Estimating remaining life from thickness readings | Readings at locations that represent the fastest-corroding components | Readings from the monitored points indicated the line could run to 2016; the unmonitored component failed in 2012 5 |
Sources: NIST AMS 100-34, 2020 3; HSE KP4 report, 2014 2; HSE KP3 report, 2007 4; US Chemical Safety and Hazard Investigation Board (CSB) final report on the 2012 Richmond refinery fire, 2015 5.
Common questions
- Is APM a software product or a way of working?
- Both senses are used. ARC describes APM as hardware, software and services, while the decisions it supports, such as deferring safety-critical work, stay with engineers and managers who carry the regulatory duties.
- Is APM the same as predictive maintenance?
- No. Predictive maintenance is one strategy, triggered by predictions from observed data. APM also covers reliability analytics, work management and integrity.
- Does APM replace asset integrity management?
- No. ARC lists asset integrity management as a separate domain within APM, and the most common confusion is between the three terms; see [Asset integrity vs reliability vs asset performance management](/library/asset-integrity-vs-reliability).
Beacon explains these concepts in its own words for education. It does not reproduce or replace the standards cited, and Winda is not affiliated with or endorsed by the organizations that publish them. Engineering decisions need the current edition of the standard and a qualified engineer.
Sources
- 1.What Is Total Asset Performance Management? (glossary) · ARC Advisory Group
- 2.Key Programme 4 (KP4): Ageing and life extension programme · UK Health and Safety Executive (HSE), Energy Division
- 3.Economics of Manufacturing Machinery Maintenance: A Survey and Analysis of U.S. Costs and Benefits (NIST AMS 100-34, D. S. Thomas and B. A. Weiss) · US National Institute of Standards and Technology (NIST)
- 4.Key Programme 3: Asset Integrity Programme · UK Health and Safety Executive (HSE), Offshore Division
- 5.Final Investigation Report: Chevron Richmond Refinery Pipe Rupture and Fire · US Chemical Safety and Hazard Investigation Board (CSB) ·
- 6.ISO 55013:2024, Asset management: Guidance on the management of data assets (standard page) (ISO 55013:2024, edition 1) · International Organization for Standardization (ISO)
- 7.ISO 55000:2024, Asset management: Vocabulary, overview and principles (standard page) (ISO 55000:2024, edition 2) · International Organization for Standardization (ISO)
- 8.29 CFR 1910.119, Process safety management of highly hazardous chemicals, paragraph (j) Mechanical integrity · eCFR, US Office of the Federal Register
- 9.2025 Publications Catalog (entry for RP 691, Risk-Based Machinery Management) (RP 691, 1st edition, June 2017) · American Petroleum Institute (API)