Skip to content
Beaconby Winda
FactOil, Gas and Chemicals Basics · Low-carbon and new energy

What is carbon capture and storage (CCS)?

·9 sources

Short answer

Carbon capture and storage (CCS) separates carbon dioxide (CO2) from industrial gas streams, moves it and stores it in deep rock formations. Transport is usually by pipeline, with the CO2 dried and compressed to a dense state. In the US, wells that inject CO2 for long-term storage are permitted as Class VI wells under the Safe Drinking Water Act.

By , Editor·Researched and drafted by ·Checked by , Editor·Last checked ·Next review

How does CO2 capture work?

Most capture is point source capture: CO2 is removed from the gas stream of a single plant, such as a power station, cement or steel works, hydrogen plant or gas processing plant 1. Removing CO2 from ambient air, called direct air capture (DAC), is classed separately as carbon dioxide removal 1.

Capture routeWhere the CO2 is separatedTypical setting
Post-combustionFrom flue gas after the fuel has burnedPower stations, including existing units
Pre-combustionFrom a hydrogen and CO2 gas made from the fuel before it is burnedPlants that convert fuel to hydrogen-rich gas
Oxy-fuelFuel burns in nearly pure oxygen, so the exhaust is mostly CO2 and water vaporCombustion systems designed for oxygen firing
Process separationFrom a process stream that must be cleaned anywayNatural gas processing, among the earliest CCS sites
Direct air captureFrom ambient airCarbon dioxide removal projects

Source: Global CCS Institute, CCS Explained: Capture (2025) 1.

Separation relies on liquid solvents that absorb CO2 and release it when heated (common in post-combustion), solid sorbents, selective membranes or cryogenic cooling 1.

How is captured CO2 transported?

Pipelines carry most captured CO2. Ships and barges are an option for offshore storage, while trucks and rail have mainly served pilot-scale tests 3. PHMSA annual report data for 2022 show 5,514 miles of US pipeline carrying CO2 in the supercritical phase 4.

CO2 becomes supercritical above about 31.1 °C (88 °F) and 72.9 atmospheres (about 1,057 psi), where it is as dense as a liquid but flows like a gas 2. Before entering the line the stream is dried, because water that drops out of the CO2 attacks carbon steel (see the table below) 3,5. For how these lines differ from natural gas lines, see How are carbon dioxide pipelines different from natural gas pipelines?.

Where is CO2 stored underground?

Geologic storage puts CO2 into porous rock deep enough that natural pressure and temperature keep it supercritical, which in most places means below about 800 m (2,600 ft) 2. At that depth the CO2 takes up far less space than at the surface 2. A low-permeability rock layer above the storage zone acts as the seal. The US Department of Energy (DOE) studies five formation types:

FormationWhat it isStorage note
Saline formationPorous rock filled with brine above 10,000 ppm total dissolved solidsLargest estimated capacity worldwide
Depleted oil or gas reservoirRock that held hydrocarbons over geologic timeInjected CO2 can also raise oil recovery (enhanced oil recovery, EOR)
Unmineable coal seamCoal too deep, thin or broken up to mineCO2 sticks to the coal and frees methane
BasaltLayers of solidified lavaCO2 reacts with calcium and magnesium to form carbonate minerals
Organic-rich shaleTight rock with low porosityMostly acts as the seal; some shales adsorb CO2

Source: NETL, Carbon Storage FAQs 2.

Four mechanisms hold the CO2 in place. Structural trapping under the seal holds the largest amount; residual trapping leaves CO2 as small stranded droplets in the pores; some CO2 dissolves into the brine; and over long periods some reacts with the rock to form solid carbonates 2.

How are CO2 storage wells regulated in the US?

EPA runs the Underground Injection Control program under the Safe Drinking Water Act, with the aim of protecting underground sources of drinking water 6. Wells that inject CO2 for long-term geologic sequestration form their own class, Class VI 6. A state, territory or tribe with EPA-approved primary enforcement authority issues the permit; elsewhere an EPA regional office does 6.

The construction rule at 40 CFR 146.86 requires that casing, cement, tubing and packer materials be compatible with the fluids they will meet, including the CO2 stream and formation fluids 7. The owner must give the permitting authority data on the stream, including how corrosive it is 7.

How many CCS projects are operating?

Counts depend on who keeps the list and what size cut-off it uses. As of its Global Status of CCS 2025 report, published 9 October 2025, the Global CCS Institute counted 77 operational CCS projects worldwide, up from 50 a year earlier, with 47 more under construction 8. The International Energy Agency (IEA) CCUS Projects Database includes only facilities with an announced capacity above 100,000 tonnes of CO2 per year, or above 1,000 tonnes per year for direct air capture 9.

Where integrity problems show up

Stage or assetTypical integrity issueIn the Library
CO2 pipeline when free water formsFree water attacks steel directly or forms carbonic acid; oxygen, hydrogen sulfide (H2S), sulfur dioxide and nitrogen oxides are expected to speed corrosionWhat is carbon dioxide (CO2) corrosion?; CO2 pipelines
CO2 pipeline during a rupture or rapid blowdownExpanding CO2 chills the pipe wall, possibly below the steel's ductile-to-brittle transition; CO2 lines are also prone to fast-running fracturesWhat is brittle fracture?; CO2 pipelines
Injection well casing, cement, tubing and packerMaterials must be compatible with the CO2 stream and formation fluids; the regulator asks for data on stream corrosivenessHow are materials selected for oil and gas equipment?; What is carbon dioxide (CO2) corrosion?

Sources: Bilio et al., IChemE Hazards XXI (2009) 5; Battelle for the Maryland Energy Administration (2019) 3; PHMSA (2025) 4; 40 CFR 146.86 (eCFR, checked 25 Oct 2026) 7.

Common questions

Is CCS the same as CCUS?
Carbon capture, utilization and storage (CCUS) adds the option of using captured CO2 rather than only storing it. A long-standing use is enhanced oil recovery, where injected CO2 pushes extra oil toward producing wells.
Is direct air capture a type of CCS?
DAC takes CO2 from ambient air rather than from a plant's gas stream, so it is classed as carbon dioxide removal. EPA notes that CO2 injected in Class VI wells can come from industrial or energy sources or directly from the air.

Beacon explains these concepts in its own words for education. It does not reproduce or replace the standards cited, and Winda is not affiliated with or endorsed by the organizations that publish them. Engineering decisions need the current edition of the standard and a qualified engineer.

Sources

  1. 1.CCS Explained: Capture · Global CCS Institute
  2. 2.Carbon Storage FAQs · National Energy Technology Laboratory (NETL), US Department of Energy
  3. 3.CO2 Transport Methods (Neeraj Gupta and Joel R. Sminchak, Battelle), Maryland Energy Administration Carbon Sequestration Workshop · Maryland Energy Administration ·
  4. 4.Notice of Proposed Rulemaking for CO2 Pipelines (unofficial pre-publication version), RIN 2137-AF60 · Pipeline and Hazardous Materials Safety Administration (PHMSA) ·
  5. 5.CO2 Pipelines: Material and Safety Considerations (M. Bilio, S. Brown, M. Fairweather, H. Mahgerefteh), IChemE Symposium Series No. 155, Hazards XXI · Institution of Chemical Engineers (repository copy, University College London)
  6. 6.Class VI - Wells used for Geologic Sequestration of Carbon Dioxide · US Environmental Protection Agency (EPA)
  7. 7.40 CFR 146.86, Injection well construction requirements · Electronic Code of Federal Regulations (eCFR)
  8. 8.Carbon Capture Stays the Course Despite Global Headwinds, with 54% Rise in Operational Projects · Global CCS Institute ·
  9. 9.Announced and operational carbon capture, utilisation and storage capacity in 2030 across editions of IEA CCUS Projects Database (chart notes) · International Energy Agency (IEA)