How does an offshore production platform work?
An offshore production platform is a fixed or floating structure that brings oil and gas up from wells beneath the seabed and processes them at sea. Its topsides separate and treat the oil, gas and water, then send oil and gas ashore by pipeline or tanker. In US federal waters, 30 CFR 250 Subpart H governs production safety systems.
By Jun Zhong, Editor·Researched and drafted by Beacon's AI newsroom·Checked by Jun Zhong, Editor·Last checked ·Next review
What are the main types of offshore production platforms?
Water depth largely decides the structure. Bottom-founded platforms stand on the seabed; floating ones are held by tendons or mooring lines. Depth ranges are indicative and differ between sources 1,2,3.
| Type | How it stays in place | Indicative water depth |
|---|---|---|
| Fixed steel jacket | Steel legs pinned to the seabed with piles | Up to about 400 m (1,300 ft); deepest example 412 m in 2005 data (National Oceanic and Atmospheric Administration, NOAA) |
| Gravity-based structure | Reinforced concrete base held down by its own weight | Examples from 82 to 303 m |
| Compliant tower | Narrow, flexible tower on a piled foundation that bends under wind and waves | About 300 to 900 m across sources |
| Tension leg platform (TLP) | Floating hull pulled down by vertical tensioned tendons, which limit vertical motion | About 450 to 2,100 m |
| Spar | Single large-diameter vertical cylinder with a deep draft, moored by 6 to 20 lines | About 600 to 3,000 m |
| Semi-submersible | Deck on columns and submerged pontoons, moored or held by dynamic positioning | About 450 m to beyond 2,000 m |
| Floating production, storage and offloading (FPSO) | Ship-shaped hull on a spread mooring or a turret that lets it turn with the weather | About 200 m to more than 3,000 m |
Sources: NOAA Ocean Explorer (2005 data) 1; Minerals Management Service (MMS, 2007) 2; Amaechi et al. (2022) 3.
A smaller version of the TLP, the mini-TLP, serves smaller deepwater fields; the first was installed in the Gulf of Mexico in 1998 2. Some fields have no platform of their own: subsea wells on the seabed are tied back through flowlines and risers to a host facility, and one host can serve many wells 3. FPSOs store oil in the hull and offload it to shuttle tankers, which suits remote deepwater fields without pipelines 2; some gravity-based structures hold crude oil in base compartments 3.
What is on the topsides?
The topsides are the decks and modules above the water. Content varies by field; a 2020 lecture on field development at the Norwegian University of Science and Technology (NTNU) and the US production safety rule describe these main areas 4,5:
- Wells and manifolds: a wellbay with Christmas trees on platforms with surface wells, or risers bringing in subsea production, feeding production manifolds 4.
- Separation: separator trains that split the well stream into oil, gas and water 4.
- Gas handling: compressors for export or reinjection, and glycol units that dry the gas (30 CFR 250.857 and 250.858) 4,5.
- Water handling: treatment of produced water, and water injection on some fields. US Environmental Protection Agency (EPA) effluent guidelines in 40 CFR Part 435 cover produced water and deck drainage from offshore facilities 4,7.
- Utilities: power generation, hydraulic power, compressed air, drinking water, heating and ventilation, and chemical injection (corrosion, scale, wax and hydrate inhibitors) 4.
- Safety systems: surface safety valves, an emergency shutdown system, fire and gas detection, firefighting systems and a flare 4,5.
- People and drilling: living quarters, a helideck, control and monitoring rooms, workshops and, on some platforms, a drilling package 4.
How do oil and gas get from the well to shore?
Fluid flows from the reservoir up the well to a tree, which sits either on the platform deck or on the seabed. From subsea trees it travels through flowlines and risers to the topsides 4,3. After separation and treatment, gas and oil leave by export pipeline, or oil is stored in the hull of an FPSO and offloaded to shuttle tankers 2.
MMS described the largest floating production platforms as able to handle several hundred thousand barrels of oil, or several million cubic feet of gas, each day 2.
Who regulates offshore platform safety?
In US federal waters, the Bureau of Safety and Environmental Enforcement (BSEE) regulates production safety systems under 30 CFR Part 250, Subpart H (Title 30 of the Code of Federal Regulations). BSEE revised the subpart in 2016, the first substantial update since 1988; operators need an approved production safety system and a pre-production inspection before starting up 6,5.
The subpart incorporates industry practices by reference. Platform production facilities need a surface safety system designed, tested and maintained to American Petroleum Institute (API) Recommended Practice 14C, and new systems must follow API Recommended Practice 14J. Pressure and fired vessels must be built to the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code and maintained and inspected under API 510, and platform process piping follows API Recommended Practice 14E and API 570 (30 CFR 250.800, 250.841, 250.851) 5.
In the UK, the Offshore Installations (Offshore Safety Directive) (Safety Case etc.) Regulations 2015 define safety and environmental critical elements: parts of an installation whose failure could cause or substantially contribute to a major accident, or whose purpose is to prevent or limit one 9.
Where integrity problems show up
| Asset or system | Typical integrity issue | In the Library |
|---|---|---|
| Deck steel, gratings, fire doors and other secondary structure | Atmospheric corrosion: on more than 50% of the nearly 100 installations the UK Health and Safety Executive (HSE) inspected in 2004 to 2007, state of plant was rated poor, and corrosion rose where painting programmes had shrunk or stopped | What is atmospheric corrosion? |
| Carbon steel firewater deluge pipework | Internal corrosion that blocks pipes and nozzles; 10 of 20 deluge systems tested were rated red or amber | What are safety and environmental critical elements (SECEs)? |
| Safety-critical systems such as emergency shutdown valves, fire pumps and heating, ventilation and air conditioning (HVAC) shutdown | Failed function tests and maintenance backlog; 64% of 56 safety-critical system tests showed some failure | Performance standard (for safety-critical elements) |
| Pressure vessels and process piping on US federal-water platforms | In-service degradation tracked by inspection, which 30 CFR 250 ties to API 510 (vessels) and API 570 (piping) | API 510 vs API 570 vs API 653: which code covers which equipment? |
| Flowlines and export pipelines carrying wet production | Internal corrosion where water is present with carbon dioxide (CO2) and hydrogen sulfide (H2S) from the produced fluids | What is carbon dioxide (CO2) corrosion? |
Sources: HSE, Key Programme 3 report (February 2007) 8; 30 CFR 250.841 and 250.851 5; Pipeline and Hazardous Materials Safety Administration (PHMSA), Fact Sheet: Internal Corrosion (2018) 10.
Common questions
- Is a production platform the same as a drilling rig?
- No. Mobile drilling rigs, such as jackups and semi-submersible rigs, move from site to site to drill wells. Production platforms stay in place until the field is depleted (MMS, 2007). Some production platforms also carry their own drilling equipment.
- What is a subsea tie-back?
- It is a development in which wells and trees sit on the seabed and their production flows through flowlines and risers to an existing host platform or FPSO (Amaechi et al., 2022).
Beacon explains these concepts in its own words for education. It does not reproduce or replace the standards cited, and Winda is not affiliated with or endorsed by the organizations that publish them. Engineering decisions need the current edition of the standard and a qualified engineer.
Sources
- 1.Types of offshore oil and gas structures · NOAA Ocean Explorer
- 2.Energy to America (fact sheet) · Minerals Management Service, U.S. Department of the Interior (hosted by BSEE)
- 3.Review on Fixed and Floating Offshore Structures. Part I: Types of Platforms with Some Applications (Journal of Marine Science and Engineering 10(8), 1074, doi:10.3390/jmse10081074) · MDPI (C.V. Amaechi, A. Reda, H.O. Butler, I.A. Ja'e, C. An)
- 4.Offshore structures for oil and gas production (TPG4230 Field development and operations, lecture notes) · Norwegian University of Science and Technology (NTNU), M. Stanko ·
- 5.30 CFR Part 250, Subpart H, Oil and Gas Production Safety Systems · Electronic Code of Federal Regulations (eCFR)
- 6.Production Safety Systems Rule (November 2016) · Bureau of Safety and Environmental Enforcement (BSEE)
- 7.Oil and Gas Extraction Effluent Guidelines · U.S. Environmental Protection Agency
- 8.Key Programme 3: Asset Integrity Programme · Health and Safety Executive (UK), Offshore Division
- 9.The Offshore Installations (Offshore Safety Directive) (Safety Case etc.) Regulations 2015, regulation 2 · legislation.gov.uk (The National Archives)
- 10.Fact Sheet: Internal Corrosion · Pipeline and Hazardous Materials Safety Administration (PHMSA)