Skip to content
Beaconby Winda

What are the PHMSA pipeline safety regulations (49 CFR 192 and 195)?

·11 sources

Short answer

The PHMSA pipeline safety regulations are the federal rules in 49 CFR Parts 190 to 199 that set minimum safety standards for US gas and liquid pipelines. Part 192 covers gas pipelines; Part 195 covers hazardous liquid and carbon dioxide pipelines, from design, construction and testing to corrosion control, operations and integrity management.

By , Editor·Researched and drafted by ·Checked by , Editor·Last checked ·Next review

Why does it matter?

The rules are federal, but the Pipeline and Hazardous Materials Safety Administration (PHMSA) says most pipeline inspections are carried out by state inspectors, largely because of the size of the gas distribution network 2. States take on all or part of intrastate oversight through annual certifications and agreements, and may add stricter rules of their own 1,2. In Texas, for example, intrastate lines answer to the Railroad Commission of Texas and interstate lines to PHMSA 10. The same federal text therefore reaches an integrity engineer through different inspectors depending on where the pipe runs.

What does each part of 49 CFR 190 to 199 cover?

PartWhat it covers 1
190PHMSA's inspection and enforcement procedures and operators' rights in response
191Gas pipeline reports: incidents, safety-related conditions, annual data
192Minimum safety standards for gas gathering, transmission and distribution lines
193Liquefied natural gas (LNG) facilities
194Oil spill response plans for onshore oil pipelines
195Safety and reporting for hazardous liquid and carbon dioxide pipelines, including operator qualification
196Protection of underground pipelines from excavation damage
198Grants to state pipeline safety programs
199Drug and alcohol testing

PHMSA describes this as a national program for about 3.3 million miles of pipelines run by about 3,000 operators (page checked 25 October 2026) 1,3.

How do Parts 192 and 195 compare?

TopicPart 192 (gas)Part 195 (hazardous liquids, CO2)
Design and componentsSubparts C and D 4Subpart C 5
ConstructionSubpart G (transmission lines and mains) 4Subpart D 5
Pressure testingSubpart J 4Subpart E 5
Corrosion controlSubpart I 4Subpart H 5
Operations and maintenanceSubparts L and M 4Subpart F 5
Personnel qualificationSubpart N 4Subpart G 5
Integrity management in high consequence areas (HCAs)Subpart O; reassessment at most every 7 calendar years for lines at or above 30% of specified minimum yield strength, with a possible 6-month extension 4195.452 for segments that could affect an HCA; 5-year intervals, not over 68 months 5
Assessments outside HCAs192.710: Class 3 and 4 and moderate consequence areas; first by 3 July 2034, then at least every 10 years 4195.416: piggable onshore line pipe; first by 1 October 2029, then at least every 10 calendar years 5
Distribution integrity managementSubpart P 4Not applicable

Which pipelines are covered, and who inspects them?

Part 192 applies to gas pipeline facilities onshore and on the Outer Continental Shelf, with exclusions such as certain producer-operated offshore lines upstream of the transfer to a transporting operator 4. Part 195 covers liquid and carbon dioxide pipelines in or affecting interstate or foreign commerce, but excludes, among others, transportation through onshore production, refining or manufacturing facilities and their in-plant piping 5. Gathering lines are covered only in part, by type and location 4,5.

Intrastate facilities, including gas distribution, gas and liquid transmission, gathering lines, storage fields and LNG plants, may be overseen by state agencies under annual certifications and agreements 2; in Texas, for example, interstate lines stay under PHMSA jurisdiction 10. PHMSA can also issue advisory bulletins and written interpretations of the rules 1.

How do the regulations change?

Changes arrive as Federal Register rulemakings. Recent ones include the gas integrity management amendments of 2019 and 2022, and a separate hazardous liquid rule of 1 October 2019 6. A final rule effective 28 June 2024 incorporated more than 20 new or updated consensus standards; Part 192 now cites ASME B31.8S-2018 for gas integrity management 4,7. A rule effective 16 March 2026 added an integrity management alternative for class location changes 8. On 8 July 2026 PHMSA proposed revised anomaly repair criteria for gas transmission and hazardous liquid lines; comments closed 8 September 2026, and as of 25 October 2026 no final rule had been published 9.

Where integrity problems show up

RequirementWhat it means for integrity records or workIn the Library
Corrosion control, 192 Subpart I and 195 Subpart HCathodic protection, coating and monitoring work, with records of surveys and tests 4,5How does cathodic protection work?
HCA integrity programs, 192 Subpart O and 195.452Identify HCAs, assess and reassess on fixed maximum intervals, act on findings 4,5High consequence area
Assessments outside HCAs, 192.710 and 195.416In-line inspection, pressure test or approved alternatives on deadlines in 2029 and 2034, then every 10 years 4,5What is in-line inspection (ILI) and pigging?
Material records, 192.67, and maximum allowable operating pressure (MAOP) rules, 192.619 and 192.624Transmission pipe installed after 1 July 2020 needs material records for life; missing records can force MAOP reconfirmation 4Maximum allowable operating pressure
Class locations, 192.5 and 192.611Building counts set the class, which sets design and pressure margins; a class change can require MAOP action 4,8Class location
Incorporated standards, 192.7 and 195.3Only the edition named in the rule applies, for example ASME B31.8S-2018 and API Standard 1163, second edition 4,5What is ASME B31.8S?

Sources: 49 CFR 192 and 195, eCFR up to date as of 22 Oct 2026 4,5; 91 FR 1608, 2026 8.

Common questions

What is the difference between 49 CFR 192 and 195?
Part 192 covers gas, from gathering to distribution; Part 195 covers hazardous liquids such as crude oil and refined products, plus carbon dioxide. They differ in integrity intervals and in what counts as an HCA segment.
Do PHMSA rules cover piping inside a refinery or gas plant?
Part 195 excludes transportation through refining or manufacturing facilities and their in-plant piping. Covered processes in such plants can fall under the Occupational Safety and Health Administration (OSHA) process safety management standard and the Environmental Protection Agency (EPA) Risk Management Program; see [What is process safety management (PSM)?](/library/process-safety-management/).
Are API and ASME standards part of the regulations?
Only where incorporated by reference, and only in the edition listed in 192.7 or 195.3.

Beacon explains these concepts in its own words for education. It does not reproduce or replace the standards cited, and Winda is not affiliated with or endorsed by the organizations that publish them. Engineering decisions need the current edition of the standard and a qualified engineer.

Sources

  1. 1.Pipeline Safety Regulations (Stakeholder Communications) · US Pipeline and Hazardous Materials Safety Administration (PHMSA)
  2. 2.State Pipeline Safety Regulators (Stakeholder Communications) · PHMSA
  3. 3.Pipeline Basics (Stakeholder Communications) · PHMSA
  4. 4.49 CFR Part 192, Transportation of Natural and Other Gas by Pipeline: Minimum Federal Safety Standards · eCFR, US Office of the Federal Register
  5. 5.49 CFR Part 195, Transportation of Hazardous Liquids by Pipeline · eCFR, US Office of the Federal Register
  6. 6.Pipeline Safety: Safety of Gas Transmission Pipelines: Repair Criteria, Integrity Management Improvements, Cathodic Protection, Management of Change, and Other Related Amendments (final rule), 87 FR 52224 · PHMSA, via Federal Register ·
  7. 7.Pipeline Safety: Periodic Updates of Regulatory References to Technical Standards and Miscellaneous Amendments (final rule), 89 FR 33264 · PHMSA, via Federal Register ·
  8. 8.Pipeline Safety: Class Location Change Requirements (final rule), 91 FR 1608 · PHMSA, via Federal Register ·
  9. 9.Pipeline Safety: Repair Criteria for Hazardous Liquid and Gas Transmission Pipelines (notice of proposed rulemaking), 91 FR 42272 · PHMSA, via Federal Register ·
  10. 10.Pipeline Safety · Railroad Commission of Texas
  11. 11.40 CFR 68.10, Applicability · eCFR, US Office of the Federal Register