What are the main types of heat exchangers in process plants?
The main heat exchanger types in process plants are shell-and-tube, air-cooled, double-pipe and plate types such as plate-and-frame and plate-fin. Shell-and-tube units are commonly built to TEMA Standards, and API publishes a separate standard for each main type, such as API 660 for shell-and-tube and API 661 for air-cooled exchangers.
By Jun Zhong, Editor·Researched and drafted by Beacon's AI newsroom·Checked by Jun Zhong, Editor·Last checked ·Next review
What does a heat exchanger do in a process plant?
A heat exchanger moves heat from a hotter fluid to a cooler one. In most process designs a metal wall keeps the two fluids apart; direct-contact designs, where the fluids mix, are a separate class 2.
In a refinery, exchangers and fired heaters bring feed up to distillation or reaction temperature 1. Exchangers take that heat from steam or from hot streams elsewhere in the process, while fired heaters supply most of the rest by burning fuel 1. On the cooling side, plants remove heat with air coolers (fin fans), water-cooled exchangers, gas and liquid coolers and overhead condensers; water, alcohol-water blends and glycol solutions are common coolants 1.
Engineers often name an exchanger by its job rather than its shape. The American Petroleum Institute (API) standard for shell-and-tube units, API 660, lists four duties: heaters, condensers, coolers and reboilers 4.
What are the main types of heat exchanger?
| Type | How it is built | API standard | Note from the API catalog |
|---|---|---|---|
| Shell-and-tube | A bundle of tubes inside a cylindrical shell; one fluid flows in the tubes, the other around them | API 660, Shell-and-Tube Heat Exchangers | Excludes vacuum steam surface condensers and feedwater heaters |
| Air-cooled (fin fan) | Bundles of finned tubes cooled by air moved by fans | API 661, Air-Cooled Heat Exchangers for General Refinery Service | Written for horizontal bundles |
| Hairpin | One pipe, or a bundle of tubes, inside an outer pipe | API 663, Hairpin Type Heat Exchangers | Includes double-pipe and multitube units |
| Plate-and-frame | Gasketed metal plates clamped together in a frame | API 667, Plate-and-Frame Heat Exchangers | Formerly API 662, Part 1 |
| Spiral plate | Two plates wound into a spiral to form two channels | API 664, Spiral Plate Heat Exchangers | Covers standalone units and units built into a vessel |
| Brazed aluminum plate-fin | Stacked plates and fins joined by brazing | API 668, Brazed Aluminum Plate-Fin Heat Exchangers | Formerly API 662, Part 2 |
Sources: API 2025 Publications Catalog 4; NPTEL heat exchanger course notes 2; OSHA Technical Manual 1.
All six sit in two families in the usual teaching scheme: tubular exchangers (double-pipe, shell-and-tube and spiral tube) and plate exchangers (gasketed plate and spiral plate), with finned tube and finned plate designs grouped as extended-surface exchangers 2. The API catalog lists these exchanger standards under heat transfer equipment for refinery service, and API Recommended Practice 572 treats exchangers and air-cooled exchangers as pressure vessels for inspection purposes 4.
How do shell-and-tube designs differ?
The main split is in how the tube bundle handles thermal expansion and whether it can be pulled out for cleaning 2.
| Design | Strength | Limitation |
|---|---|---|
| Fixed tubesheet | Lowest cost; most tubes for a given shell size | Shell side cannot be cleaned mechanically; differential expansion may need a shell expansion joint |
| U-tube | Tubes expand freely; bundle can be removed; cheaper than a floating head | Tube bends are cleaned chemically; single tubes are hard to replace |
| Floating head | One tubesheet moves with expansion; both sides can be cleaned mechanically | Bolting for the floating head takes space that could hold tubes |
Source: NPTEL, Process Design of Heat Exchangers 2.
The Tubular Exchanger Manufacturers Association (TEMA), founded in 1939, publishes the TEMA Standards for shell-and-tube construction; its website introduces a 2026 edition 5. TEMA groups exchangers into three construction classes: R for severe petroleum and related processing, C for general commercial service and B for chemical process service 3,6. Most shell-and-tube units for process service are built to TEMA, which sets mechanical rules but leaves thermal design to the designer 6.
Reboilers, which boil liquid at the bottom of a distillation column, come in three common forms 2. A thermosyphon reboiler needs no pump but sits high relative to the column; a forced-circulation reboiler uses a pump and suits viscous or heavily fouling liquids; a kettle reboiler sets the tube bundle in an oversized shell and suits high vaporization rates and vacuum service 2.
How else are heat exchangers classified?
Course texts also sort exchangers by how heat is transferred and how the fluids flow 2. Recuperative exchangers pass heat through a wall, while regenerative exchangers store heat in a matrix that the hot and cold streams contact in turn 2. By flow arrangement, the streams can run in counterflow, parallel flow or crossflow, and each side can carry a single-phase or a boiling or condensing fluid 2.
Where integrity problems show up
| Exchanger or duty | Typical integrity issue | In the Library |
|---|---|---|
| Crude unit preheat exchangers | Corrosion by hydrogen chloride and hydrogen sulfide | What is hydrochloric acid (HCl) corrosion in crude unit overheads? |
| Crude unit bottoms exchangers | Corrosion by hydrogen sulfide and sulfur compounds | What is sulfidation (high-temperature sulfur corrosion)? |
| Water-cooled exchangers and coolers | Corrosion and fouling from impurities and dissolved oxygen in cooling water; scale from dissolved salts | What is cooling water corrosion? |
| Exchangers downstream of the crude desalter | Fouling when desalting is inadequate, which restricts flow and heat transfer | What is a crude distillation unit? |
| Reboiler shells | Rupture from overpressure when heated while blocked in from the relief device | What does a pressure relief valve do?; What is management of change (MOC)? |
Sources: OSHA Technical Manual, Section IV, Chapter 2 1; CSB case study released 19 October 2016 on a 13 June 2013 reboiler rupture at an olefins plant in Geismar, Louisiana, which killed 2 workers and injured 167 people 7.
A failed tube is a hazard in itself: the fluid on the higher-pressure side flows into the other side, so process fluid can enter a utility system or the reverse 1. OSHA's manual also notes that exchanger piping that can be blocked in while full of liquid may need pressure relief for thermal expansion 1.
Common questions
- Is a fired heater a heat exchanger?
- Not in the usual plant sense. A fired heater burns fuel to heat a process fluid in tubes, while a heat exchanger moves heat between two process or utility streams; API covers them in separate standards, API 560 for fired heaters and API 660 for shell-and-tube exchangers.
- What is the difference between a cooler and a condenser?
- A cooler lowers the temperature of a liquid or gas, while a condenser removes enough heat to turn vapor into liquid, as in a column overhead. Condensers are usually built like shell-and-tube units with a vent for gases that do not condense.
- What do TEMA classes R, C and B mean?
- They are construction classes for shell-and-tube exchangers: R for severe petroleum and related service, C for general commercial service and B for chemical process service.
Beacon explains these concepts in its own words for education. It does not reproduce or replace the standards cited, and Winda is not affiliated with or endorsed by the organizations that publish them. Engineering decisions need the current edition of the standard and a qualified engineer.
Sources
- 1.OSHA Technical Manual, Section IV, Chapter 2: Petroleum Refining Processes · US Occupational Safety and Health Administration (OSHA)
- 2.Chemical Engineering Design II, Module 1: Process Design of Heat Exchangers · NPTEL (Indian Institutes of Technology and Indian Institute of Science)
- 3.Chemical Engineering Design II, Module 2, Lecture 1: Mechanical Design Standards · NPTEL (Indian Institutes of Technology and Indian Institute of Science)
- 4.2025 Publications Catalog (Refining: Heat Transfer Equipment Standards; Inspection of Refinery Equipment) · American Petroleum Institute (API)
- 5.TEMA Standards (2026 edition) · Tubular Exchanger Manufacturers Association (TEMA)
- 6.Tubular Exchanger Manufacturers Association (TEMA) (encyclopedia entry) · Thermopedia, Begell House
- 7.CSB Releases Final Case Study into 2013 Explosion and Fire at Williams Olefins Plant in Geismar, Louisiana · US Chemical Safety and Hazard Investigation Board (CSB) ·