Long-term corrosion rate
A long-term corrosion rate is the average rate of wall loss at a thickness monitoring location from its first reading to its latest one.
By Jun Zhong, Editor·Researched and drafted by Beacon's AI newsroom·Checked by Jun Zhong, Editor·Last checked
It is one of two rates worked out under API 570, the American Petroleum Institute's in-service piping inspection code: inspection records software built to that code calculates short-term and long-term rates together with retirement dates and inspection intervals 1.
It is the average speed of thinning over the full life of a measuring point. Because it spreads the loss over many years, it reacts slowly to a recent speed-up. Changes in temperature, pH, flow velocity or contaminants can all raise corrosion rates 3, and a refinery corrosion manual quoted by the US Chemical Safety Board (CSB) warns that a rise can go unnoticed until a failure 2.
See alsoShort-term corrosion rateBaseline inspectionRemaining life
Sources
- 1.Rancang Bangung Perangkat Lunak In-Service Piping Inspection Berdasarkan API 570 dan API 574 (Design of in-service piping inspection software based on API 570 and API 574), undergraduate thesis, D. C. Pakpahan (English abstract) · Institut Teknologi Sepuluh Nopember (ITS), Indonesia
- 2.Final Investigation Report: Chevron Richmond Refinery Pipe Rupture and Fire (Report No. 2012-03-I-CA) · US Chemical Safety and Hazard Investigation Board (CSB)
- 3.Prevent Corrosion and Ensure Reliability (J. Danis), Chemical Engineering Progress · American Institute of Chemical Engineers (AIChE)