Skip to content
Beaconby Winda
FactInspection, Testing and Monitoring · In-service inspection codes

What is API 510?

·11 sources

Short answer

API 510 is the American Petroleum Institute's code for inspecting, repairing, altering and rerating pressure vessels once they are in service. It also covers the pressure-relieving devices that protect those vessels. The current 11th edition (October 2022) applies to hydrocarbon and chemical process vessels, including those built to ASME Section VIII Divisions 1 and 2.

By , Editor·Researched and drafted by ·Checked by , Editor·Last checked ·Next review

Why does it matter?

A pressure vessel's ASME Section VIII nameplate records how it was built, not how it must be inspected once it is running. A 1990 guide to pressure vessel safety assessment from the National Institute of Standards and Technology (NIST) noted that the main US vessel design codes contain no rules for in-service inspection, and pointed to API 510 and the National Board Inspection Code (NBIC) for that work 4. Damage then accumulates in service: the Occupational Safety and Health Administration's (OSHA) 2017 review of refinery inspections records citations for vessels never given ultrasonic thickness tests and for corrosion rates above expectation left unaddressed 5.

What does API 510 cover?

API's public summary of the 11th edition gives this scope 1,2:

  • Work: in-service inspection, repair, alteration and rerating. 1,2
  • Equipment: the vessels themselves, plus the relief devices (PRDs) installed to guard them against overpressure. 1,2
  • Industries: every hydrocarbon and chemical process vessel once placed in service; owners may also apply the code to process vessels in other industries. 1,2
  • Vessel types: vessels built to a construction code such as the ASME Boiler and Pressure Vessel Code (for Section VIII, Divisions 1 and 2 but not Division 3), vessels built to no code, special vessels a jurisdiction has accepted, and nonstandard vessels. 1,2
  • New in the 11th edition: a detailed section on analyzing inspection results to confirm that a vessel remains fit for service 2.

How is API 510 used with other documents?

DocumentRole next to API 510Edition (API 2025 catalog)In the Library
API RP 572, Inspection Practices for Pressure VesselsInspection practice for towers, exchangers, air coolers, reactors and spheres, from planning to records5th, November 2023What is API 572 (inspection practices for pressure vessels)?
API RP 576, Inspection of Pressure-Relieving DevicesHow the relief devices inside API 510's scope are inspected5th, 2024What does a pressure relief valve do?
API RP 571, Damage Mechanisms Affecting Fixed Equipment in the Refining IndustryBackground on the damage an inspection plan is built to find3rd, March 2020What is a damage mechanism review?
API RP 580, Elements of a Risk-Based Inspection ProgramFramework for setting up an inspection program ranked by risk4th, 2023What is risk-based inspection (RBI)?
API 579-1/ASME FFS-1, Fitness-For-ServiceMethods to judge whether damaged equipment can keep running; API lists API 510 among the codes that reference it4th, December 2021What is fitness-for-service (API 579-1/ASME FFS-1)?
National Board Inspection Code (NBIC, NB-23)The counterpart in-service code, used mainly outside refining and petrochemicalsPublished by the National Board, not APIWhat is the National Board Inspection Code (NBIC)?

Sources: API 2025 Publications Catalog 1; NIST SP 780 (1990) 4.

Who requires API 510?

  • US process safety rules. OSHA's process safety management standard requires vessel inspection and testing to be documented and to meet "recognized and generally accepted good engineering practices" (RAGAGEP) 6. OSHA names API 510 as an example of that practice for vessels 5.
  • Offshore production. The Bureau of Safety and Environmental Enforcement (BSEE) requires pressure and fired vessels that support production to be repaired, maintained and inspected to API 510, and incorporates the 10th edition (2014) with its 2017 addendum 7.
  • Pipeline breakout tanks built to API 2510. The Pipeline and Hazardous Materials Safety Administration (PHMSA) requires these pressurized tanks to be inspected and repaired under API 510, also in the 10th edition 8.
  • States and cities. Each jurisdiction sets its own boiler and pressure vessel law, summarized in the National Board's NB-370 synopsis, where 14 US jurisdictions (13 states and Puerto Rico) mention API 510 9:
Jurisdiction (date of its NB-370 review)What its entry says about API 510
Illinois (4 Nov 2025)Adopts the 11th edition (October 2022, with Errata 1); owner-user organizations approved by the state inspect their vessels under API 510
Colorado (13 Jan 2026)Accepts the 10th edition, and API 570's 4th edition, in place of the NBIC for the chemical and petroleum industries only
Washington (6 Oct 2025)Owner-user organizations certified by the National Board may choose to use the current edition
California (24 Nov 2024)Lists the 8th edition (August 2003)

Source: NB-370 synopsis, checked 25 Oct 2026 9; the National Board advises confirming details with each jurisdiction's chief inspector.

Who can carry out API 510 inspections?

API certifies pressure vessel inspectors through its Individual Certification Programs, running since 1989, and states that the API 510 program holds ANSI accreditation 3; its 11th edition announcement cited more than 18,000 API-certified inspectors 2. Several jurisdictions also accept inspectors employed by approved owner-user organizations 9, an arrangement NIST described under API 510 in 1990 4. See How do API 510, 570 and 653 inspector certifications work?.

Where integrity problems show up

What it finds wellWhat it can miss or get wrongIn the Library
General wall loss: API 510 and the NBIC both use the general corrosion rate to time the next inspection 4Corrosion faster than assumed: OSHA cited corrosion rates above the expected rate that were left uncorrected, and thickness readings that rose without being investigated 5Corrosion rate, Remaining life
Weld cracking in services with a known cracking history, such as amine, wet hydrogen sulfide, ammonia, deaerator and pulp digester vessels, where OSHA's guidance focuses inspection on welds 11Early high temperature hydrogen attack, which the US Chemical Safety and Hazard Investigation Board (CSB) found hard to detect, with results that depend on technique and inspector skill (Anacortes, Washington, 2010) 10What is high temperature hydrogen attack (HTHA)?
Relief devices, which sit inside the code's scope 1OSHA's refinery program found relief devices to be the equipment most often cited for uncorrected deficiencies 5What does a pressure relief valve do?
Visible corrosion, erosion and blistering, found by visual examination of a clean, well-lit surface 11Corrosion under insulation that inspections never looked beneath, cited by OSHA 5What is corrosion under insulation (CUI)?

Sources: NIST SP 780 (1990) 4; OSHA 3918 (2017) 5; CSB report on Anacortes (2014) 10; OSHA Technical Manual, Section IV, Chapter 3 11.

Common questions

What is the difference between API 510 and the National Board Inspection Code?
Both cover in-service inspection, repair, alteration and rerating. API 510 is aimed at refinery, petrochemical and chemical process vessels, while the NBIC, published by the National Board as NB-23, serves other installations. Each jurisdiction decides which it accepts.
Is API RP 572 the same as API 510?
No. API 510 is the code that sets requirements; RP 572 is a recommended practice that supplements it with inspection know-how.
Does API 510 cover boilers?
No. API 510 covers pressure vessels; API publishes RP 573 (4th edition, January 2021) for inspecting fired boilers and process heaters, and boilers are inspected under each jurisdiction's boiler law.

Beacon explains these concepts in its own words for education. It does not reproduce or replace the standards cited, and Winda is not affiliated with or endorsed by the organizations that publish them. Engineering decisions need the current edition of the standard and a qualified engineer.

Sources

  1. 1.2025 Publications Catalog (entries for API 510, RP 571, RP 572, RP 573, RP 576, RP 580 and API 579-1/ASME FFS-1) (API 510, 11th edition, October 2022 (Errata 1, March 2023); RP 571, 3rd edition, March 2020; RP 572, 5th edition, November 2023; RP 573, 4th edition, January 2021; RP 576, 5th edition, 2024; RP 580, 4th edition, 2023; API 579-1/ASME FFS-1, 4th edition, December 2021) · American Petroleum Institute (API)
  2. 2.New Edition of API 510 Enhances Safety of Pressure Vessel Inspection Code · American Petroleum Institute (API)
  3. 3.Individual Certification Programs · American Petroleum Institute (API)
  4. 4.NIST Special Publication 780, Guidelines for Pressure Vessel Safety Assessment (S. Yukawa) · US National Institute of Standards and Technology (NIST)
  5. 5.Process Safety Management for Petroleum Refineries: Lessons Learned from the Petroleum Refinery Process Safety Management National Emphasis Program (OSHA 3918) · US Occupational Safety and Health Administration (OSHA)
  6. 6.29 CFR 1910.119, Process safety management of highly hazardous chemicals · eCFR, US Office of the Federal Register
  7. 7.30 CFR 250.198, Documents incorporated by reference, and 250.851, Pressure vessels (including heat exchangers) and fired vessels · eCFR, US Office of the Federal Register
  8. 8.49 CFR 195.3, 195.205 and 195.432 (incorporation by reference; repair and inspection of breakout tanks) · eCFR, US Office of the Federal Register
  9. 9.NB-370, National Board Synopsis of Boiler and Pressure Vessel Laws, Rules and Regulations (all jurisdictions) · National Board of Boiler and Pressure Vessel Inspectors (NBBI)
  10. 10.Investigation Report: Catastrophic Rupture of Heat Exchanger, Tesoro Anacortes Refinery (Report 2010-08-I-WA) · US Chemical Safety and Hazard Investigation Board (CSB)
  11. 11.OSHA Technical Manual, Section IV, Chapter 3: Pressure Vessel Guidelines · US Occupational Safety and Health Administration (OSHA)