Skip to content
Beaconby Winda
FactAsset Integrity Management · Risk-based inspection

API 580 vs API 581: what is the difference?

·Updated ·9 sources

Short answer

API RP 580 sets out what a risk-based inspection (RBI) program must contain; API RP 581 is API's quantitative method for calculating the risk. RP 580 allows qualitative to fully quantitative analysis, so a program can follow RP 580 without using RP 581. The 4th edition of RP 580 dates from August 2023.

By , Editor·Researched and drafted by ·Checked by , Editor·Last checked ·Next review

Why does it matter?

An RBI program does not have to use API 581. The American Petroleum Institute (API) describes RP 580 as accepting risk analysis from qualitative through fully quantitative, with RP 581 supplying quantitative calculation methods 1. The reverse also holds: a calculation is not a program. After a heat exchanger ruptured at Anacortes, Washington, in 2010, the US Chemical Safety and Hazard Investigation Board (CSB) found that an RP 581 calculation fed with design conditions put that exchanger in the lowest susceptibility class for the damage that broke it 4.

API 580 vs API 581 at a glance

API RP 580API RP 581
Full titleElements of a Risk-Based Inspection Program 1Risk-Based Inspection Methodology 1
What it givesMinimum and recommended elements to set up, run and maintain an RBI program, and ways to assess a program and its plan 1Quantitative procedures to work out risk from probability and consequence of failure, and to set an inspection plan 1
In CSB's words, restatedThe standard for developing an RBI program 4The standard for implementing one 4
Risk methods allowedQualitative through fully quantitative 1Quantitative 1
Equipment namedPressure-containing fixed equipment in refining, petrochemical and chemical plants and oil and gas production 1Pressure vessels, piping, tanks, pressure relief devices, heat exchanger tube bundles 1
Current edition4th, August 2023; Addendum 1, March 2025 5,24th, January 2025 5; API's 2025 catalog still lists the 3rd, April 2016, with addenda of 2019 and 2020 1
Length (pages)99 1632 (3rd edition) 1
Individual certificationAPI 580 certification; the exam lists RP 580 as its only reference 2,3No API certification bears its number 3
Named in official documentsOSHA lists API 580 with API 510 and 570 as examples of inspection good practice 9Reviewed by CSB in the Anacortes investigation; CSB closed its recommendation on RP 581 as an unacceptable action in 2016 4,6

Sources: API 2025 Publications Catalog 1; API 580 body of knowledge, 2026 2; API certification page 3; CSB report 2010-08-I-WA 4; API Standards Plan 5; CSB status change summary, 2016 6; OSHA 3918, 2017 9.

When is API 580 used?

  • To set up or audit an RBI program. It covers what a program needs and includes ways to judge an existing inspection program and plan 1.
  • When a qualitative or semi-quantitative method fits the data. A 2026 open-access paper notes that likelihood and consequence can both be rated qualitatively with indexes, often shown on a risk matrix 8.
  • To certify people. API's 2026 exam for the API 580 certificate is based on RP 580, 4th edition, with Addendum 1 2.
  • To show recognized engineering practice. OSHA's 2017 refinery review lists API 580 among examples of inspection practice for piping and vessels 9.

When is API 581 used?

  • When the owner wants risk in numbers for each item. A 2026 open-access paper describes the likelihood side of the API approach as a generic failure frequency, taken from historical data, combined with a factor for the damage mechanisms at work 8. See What is API 581?.
  • To set inspection dates against a risk target. Risk grows as damage accumulates, and an inspection effective enough to measure the damage is recommended as the target nears 1. See Risk target.
  • To credit past inspections. CSB notes that RP 581 contains calculations for inspection effectiveness 4. See Inspection effectiveness.
  • In software. API sells RBI software built on the method, for screening units, scoring each item consistently and ranking equipment 1.

What is the common mix-up?

The two documents are often written as one, "API 580/581", which suggests a single standard in two parts. They are separate recommended practices with different jobs: RP 580 says what an RBI program must do and accepts several ways of estimating risk, while RP 581 is one detailed way of estimating it 1.

Neither is a guarantee. CSB found RP 581 "written permissively" and recommended that API set minimum requirements and require users to verify actual operating conditions 4,6. API published the 3rd edition in April 2016; CSB found that it added the verification requirement for high temperature hydrogen attack but not the rest, and closed the recommendation on 4 October 2016 as an unacceptable action 6.

Where integrity problems show up

DecisionData it depends onWhat goes wrong without itIn the Library
Choosing a qualitative or quantitative methodThe quality and amount of data availableA quantitative result is only as good as its inputs: with design conditions, the calculation at Anacortes gave the lowest class for the exchanger that ruptured 4Qualitative vs semi-quantitative vs quantitative RBI
Which operating data go inActual operating conditions, verifiedCSB recommended that verification be required; the 3rd edition of RP 581 added it for high temperature hydrogen attack 6What is a damage mechanism review?
Setting a tank's interval by riskCorrosion rates or an RBI assessmentEPA: under API 653 an RBI assessment can lengthen or shorten a tank's internal inspection interval 7How are inspection intervals set for vessels, piping and tanks?
Acting on odd inspection dataRetests and investigation of anomaliesOSHA found thickness readings that increased with no investigation; anomalous results must be retested and resolved 9How does ultrasonic thickness measurement work?

Sources: CSB report 2010-08-I-WA 4; CSB status change summary, 2016 6; EPA SPCC guidance, Chapter 7 7; OSHA 3918, 2017 9.

Common questions

Do you need both API 580 and API 581?
Not necessarily. A program can meet RP 580 with qualitative or semi-quantitative methods; RP 581 is needed only if its quantitative method is chosen.
Does the API 580 exam cover API 581?
API's 2026 body of knowledge lists only RP 580, 4th edition with Addendum 1, as the reference publication.
How do API 580 and 581 relate to API 510, 570 and 653?
API 510, 570 and 653 are API's in-service inspection documents for pressure vessels, piping and storage tanks. OSHA names API 510, 570 and 580 together as examples of inspection practice. See [API 510 vs API 570 vs API 653: which code covers which equipment?](/library/api-510-vs-api-570-vs-api-653/).

Beacon explains these concepts in its own words for education. It does not reproduce or replace the standards cited, and Winda is not affiliated with or endorsed by the organizations that publish them. Engineering decisions need the current edition of the standard and a qualified engineer.

Sources

  1. 1.2025 Publications Catalog (entries for API RP 580 and API RP 581) · American Petroleum Institute (API)
  2. 2.Body of Knowledge for API 580 Risk-Based Inspection Certification Exam (2026) · American Petroleum Institute (API)
  3. 3.API 580 Certification: Risk Based Inspection (certification page) · American Petroleum Institute (API)
  4. 4.Investigation Report: Catastrophic Rupture of Heat Exchanger (Seven Fatalities), Tesoro Anacortes Refinery, Anacortes, Washington, April 2, 2010, Report 2010-08-I-WA · US Chemical Safety and Hazard Investigation Board (CSB)
  5. 5.API Standards Plan: Industry Standards in Development (list of published standards: API RP 580, 4th edition, 31 August 2023, Addendum 1, 3 March 2025; API RP 581, 4th edition, 30 January 2025) · American Petroleum Institute (API)
  6. 6.Recommendations Status Change Summary, Recommendation 2010-8-I-WA-R11 to the American Petroleum Institute (API RP 581) · US Chemical Safety and Hazard Investigation Board (CSB) ·
  7. 7.SPCC Guidance for Regional Inspectors, Chapter 7: Inspection, Evaluation, and Testing · US Environmental Protection Agency (EPA) ·
  8. 8.Toward the application of the Risk-Based Maintenance approach to a hydrogen-fueled manufacturing plant (G. Collina and others), International Journal of Hydrogen Energy 238, 155318, open access under CC BY 4.0 · Elsevier, via OSTI.gov (co-authored by the US National Laboratory of the Rockies)
  9. 9.Process Safety Management for Petroleum Refineries: Lessons Learned from the Petroleum Refinery Process Safety Management National Emphasis Program (OSHA 3918-08 2017) · US Occupational Safety and Health Administration (OSHA)