Who does what in asset integrity: integrity engineer, corrosion engineer, inspector?
Asset integrity work is shared between integrity engineers, corrosion engineers, inspectors and reliability engineers, though job titles vary by company. Integrity engineers plan and assess, corrosion engineers identify and control damage mechanisms, inspectors examine equipment and record its condition, and reliability engineers reduce failures. US rules such as 49 CFR 192.915 set qualification and training duties.
By Jun Zhong, Editor·Researched and drafted by Beacon's AI newsroom·Checked by Jun Zhong, Editor·Last checked ·Next review
Why does it matter?
Before the 2012 Richmond, California, refinery fire, staff who understood sulfidation corrosion had recommended several times over 10 years that every component of the line be inspected or the pipe upgraded to a more resistant steel 1. The US Chemical Safety and Hazard Investigation Board (CSB) found that the advice went through turnaround planning, was turned down under that process's criteria, and was left with lower-level employees who had no decision-making or funding authority; no senior manager was assigned to see it through 1. The UK Health and Safety Executive (HSE) found a related pattern offshore in its Key Programme 3 (KP3): the engineering function had lost influence, and the technical authority role needed strengthening in many companies 2.
What does each integrity role do?
US job data do not settle the titles: O*NET OnLine, the US Department of Labor's occupation database, has no occupation named corrosion, integrity or reliability engineer, and a search for corrosion engineer points first to materials engineers and non-destructive testing specialists 10,11. The table describes each role by the work it covers.
| Role | Main work | Public reference point | In the Library |
|---|---|---|---|
| Integrity engineer | Plans inspection, reviews and analyzes results, and decides what action findings need | US gas pipeline rules require qualification criteria for anyone who conducts integrity assessments, reviews and analyzes the results, or decides actions on them 4 | What is fitness-for-service (API 579-1/ASME FFS-1)? |
| Corrosion engineer (often a metallurgist or materials engineer) | Identifies damage mechanisms, advises on materials and corrosion control, analyzes failures | O*NET lists analyzing failure data and recommending materials among materials engineers' tasks 10; Association for Materials Protection and Performance (AMPP) training covers corrosion, cathodic protection, coatings and coatings inspection 9 | What is a damage mechanism review? |
| Inspector | Examines and tests equipment and records what was found | Inspectors certified under the American Petroleum Institute (API) 510 program need broad knowledge of pressure vessel maintenance, inspection, repair and alteration; the certificate lasts 3 years 8; O*NET lists interpreting test results against codes and looking for corrosion, fatigue and cracks 11 | How do API 510, 570 and 653 inspector certifications work? |
| Reliability engineer | Reduces equipment failures through maintenance strategy and failure analysis | At Richmond, the refinery's reliability group received the corporate sulfidation guidance and proposed replacing the line with higher-chromium steel 1 | What is reliability-centered maintenance (RCM)? |
| Technical authority | Engineer with authority to give expert judgement on major hazard engineering issues, including deferrals and impaired safety-critical elements | Named and assessed in HSE's offshore asset integrity programme 2,3 | What are safety and environmental critical elements (SECEs)? |
| Independent verifier (UK offshore) | Examines safety and environmental critical elements under a verification scheme | Must be independent of the work examined and competent, with suitably qualified and experienced staff 7 | Performance standard (for safety-critical elements) |
Sources: O*NET OnLine 10,11; AMPP 9; API 8; 49 CFR 192.915 4; CSB Richmond report, 2015 1; HSE KP3 report and review 2,3; HSE L154 7.
Who decides when integrity advice is acted on?
At Richmond, the corporate technical center that wrote the sulfidation guidance sent it to refinery reliability managers and metallurgists, but it had no direct authority over refinery reliability management 1. The reliability group regarded full component inspection as important but unfunded within its normal budget and headcount, and its proposals to replace the piping were denied in turnaround planning 1. An informal appeal route to the unit's business manager existed, but the inspection and metallurgical staff never used it 1.
Offshore, HSE found deferral decisions on safety-critical maintenance were often based on poor assessment, with too little involvement of management and technical authorities 2. By 2009 many companies had strengthened the technical authority role, for example by giving it more direct reporting to senior management and freeing a central pool of authorities to focus on major hazards 3.
What training and qualification do the rules require?
- US gas transmission pipelines: supervisors must know the integrity program well, and the program must set qualification criteria for people who assess, analyze, decide and carry out preventive and mitigative measures 4.
- US process safety: employers must train each employee who maintains process equipment in the process, its hazards and the procedures for their tasks, and must record each inspection and test with the name of the person who did it 5.
- US offshore: the safety and environmental management system must cover training of employees who maintain equipment, and inspection records must carry the name, position and signature of the person who performed them 6.
- UK offshore: the verification scheme must set out the principles for selecting a verifier, and HSE's guidance expects it to show how the verifier's expertise, experience and independence were judged 7.
Where integrity problems show up
| Decision | Data it depends on | What goes wrong without it | In the Library |
|---|---|---|---|
| Setting turnaround scope for integrity work | Inspection and metallurgy recommendations with their risk ranking | At Richmond, recommendations to inspect or replace the line were denied under turnaround criteria, and no senior manager owned them 1 | How is inspection scope set for a turnaround? |
| Funding an integrity initiative | Who holds the budget and headcount | Full component inspection was seen as an unfunded initiative, and the experts behind it had no authority in the refinery 1 | Asset integrity vs reliability vs asset performance management |
| Keeping a degraded safety-critical element in service | Risk assessment with technical authority input | Deferrals were often decided on poor assessment, with little technical authority involvement 2 | What are safety and environmental critical elements (SECEs)? |
| Acting on independent verification | Verifier findings and follow-up | On fixed installations, verifiers were treated as an internal inspection tool, related work was deferred and actions were poorly followed up 2 | Performance standard (for safety-critical elements) |
| Entering inspection findings where they will be tracked | Findings tied to monitoring locations | Corrosion found on the Richmond component in 2002 was not entered into location tracking, so it was never inspected again 1 | What is an inspection data management system (IDMS)? |
Sources: CSB final report on the 2012 Richmond refinery fire, 2015 1; HSE KP3 report, 2007 2.
Common questions
- What is a technical authority?
- In HSE's usage, the engineering role expected to give expert judgement on key operational engineering issues and to act as a backstop against degraded safety-critical elements. HSE found many technical authorities pulled into day-to-day problems instead of that strategic role.
- Is a reliability engineer part of the integrity team?
- The Center for Chemical Process Safety (CCPS) treats asset integrity and reliability as one element of process safety management, but companies organize them differently; at Richmond, integrity advice was handled through the reliability group.
- What is an independent verifier?
- Under UK offshore rules, a person or body that has not been responsible for what it examines, is independent enough of the management system to stay objective, and has enough technical competence for the task.
Beacon explains these concepts in its own words for education. It does not reproduce or replace the standards cited, and Winda is not affiliated with or endorsed by the organizations that publish them. Engineering decisions need the current edition of the standard and a qualified engineer.
Sources
- 1.Final Investigation Report: Chevron Richmond Refinery Pipe Rupture and Fire · US Chemical Safety and Hazard Investigation Board (CSB) ·
- 2.Key Programme 3: Asset Integrity Programme · UK Health and Safety Executive (HSE), Offshore Division
- 3.Key Programme 3, Asset Integrity: A review of industry's progress · UK Health and Safety Executive (HSE), Offshore Division
- 4.49 CFR 192.915, What knowledge and training must personnel have to carry out an integrity management program? · eCFR, US Office of the Federal Register
- 5.29 CFR 1910.119, Process safety management of highly hazardous chemicals, paragraph (j) Mechanical integrity · eCFR, US Office of the Federal Register
- 6.30 CFR 250.1916, What criteria for mechanical integrity must my SEMS program meet? · eCFR, US Office of the Federal Register
- 7.L154, The Offshore Installations (Offshore Safety Directive) (Safety Case etc) Regulations 2015: Guidance on Regulations (regulation 2(6) to (9) and Schedule 4) (First edition) · UK Health and Safety Executive (HSE)
- 8.API 510 Certification: Pressure Vessel Inspector (Individual Certification Programs) · American Petroleum Institute (API)
- 9.Certification information · Association for Materials Protection and Performance (AMPP)
- 10.Summary Report for 17-2131.00, Materials Engineers · O*NET OnLine, US Department of Labor
- 11.Summary Report for 17-3029.01, Non-Destructive Testing Specialists · O*NET OnLine, US Department of Labor
- 12.Introduction to Asset Integrity and Reliability · American Institute of Chemical Engineers (AIChE), Center for Chemical Process Safety (CCPS)