Skip to content
Beaconby Winda
FactCorrosion and Damage Mechanisms · Corrosion basics

What does a corrosion engineer do?

·9 sources

Short answer

A corrosion engineer works out how metal equipment will degrade in service and keeps that damage under control. The work covers material choice, cathodic protection, coatings, chemical treatment, monitoring and failure analysis. US gas pipeline rules require corrosion control to be done or directed by a person qualified in pipeline corrosion control methods (49 CFR 192.453).

By , Editor·Researched and drafted by ·Checked by , Editor·Last checked ·Next review

Why does it matter?

On 19 August 2000, a natural gas pipeline ruptured beside the Pecos River near Carlsbad, New Mexico, and 12 people camping nearby died in the fire 1. The US National Transportation Safety Board (NTSB) found that internal corrosion had reduced the pipe wall by as much as 72%, and that it had developed because the operator's corrosion control program had not prevented, detected or controlled it 1. Federal inspectors had earlier asked whether that program ran under the direction of a qualified person 1. The Association for Materials Protection and Performance (AMPP) describes designing, implementing and evaluating such programs as the core competence of its internal corrosion specialists 7.

What does a corrosion engineer work on?

Area of workWhat it involvesTypical outputSource
Damage mechanism reviewWorking out which damage each process unit or circuit is prone to, and which conditions drive itA corrosion control document, the subject of API RP 970 (2nd edition, April 2023), which also links to management of change and hazard analysis3
Operating limitsSetting limits on process variables that affect damageIntegrity operating windows, covered by API RP 584 (2nd edition, December 2021)3
Cathodic protectionDesign, installation, operation and maintenance of cathodic protection systemsSurvey records; US gas pipelines must test cathodic protection at least once each calendar year (49 CFR 192.465)2
Coatings, materials and chemical treatmentChoosing coatings and alloys, and inhibitor programsSpecifications and treatment programs; these are core topics in AMPP's technician and technologist certifications5,6
Monitoring and dataPlacing coupons and probes, trending corrosion data, checking that mitigation worksMonitoring plans; where corrosive gas is carried, US rules require coupons or similar to be checked twice each calendar year (49 CFR 192.477)2,7
Failure analysisLeading or supporting failure and root cause analysisFindings and recommended actions7

API RP 571 (3rd edition, March 2020), which covers more than 60 damage mechanisms in refining equipment, is a common reference for the first row 3.

Where do corrosion engineers work in oil and gas?

  • Upstream and offshore. NACE International's 2016 IMPACT study reports that most oil and gas companies run some form of corrosion control program, and that rising water cut, more corrosive gases and higher temperatures and pressures have made internal corrosion a major threat 4.
  • Pipelines. US pipeline rules set corrosion control duties for gas and hazardous liquid operators, including qualification of the people who direct the work and knowledge requirements for supervisors (49 CFR 192.453, 195.555) 2.
  • Refining and petrochemicals. Corrosion control documents and integrity operating windows are refinery tools described by API 3.

What qualifications do corrosion engineers have?

Corrosion draws on materials science, chemistry and electrochemistry, and university teaching is spread across materials, chemical and mechanical engineering and chemistry departments 4. As of the 2016 IMPACT report, the University of Akron was the only US university offering a bachelor's degree in corrosion engineering, with its first graduates in 2015 4. A 2017 study of China's corrosion costs reported that no Chinese university then offered an undergraduate corrosion degree 8.

Most training happens after university. In 2014 alone, IMPACT reports, NACE ran 829 courses across 36 countries and trained upwards of 16,000 people 4. As of October 2026, AMPP's ladder starts with Corrosion Technician, for people with at least two years of corrosion work under senior direction, and continues to Senior Corrosion Technologist, which requires eight years of experience, or an engineering or physical science degree plus four years, in each case including four years in responsible charge 5,6. Specialist certifications follow, such as Internal Corrosion Specialist, which covers designing and managing internal corrosion programs 7.

IMPACT reports that corrosion professionals who can manage and apply corrosion practices are hard to find, and that in its corrosion management survey the ten best-scoring organizations stood out on staff development: defining the competencies a corrosion career path requires was close to six times as common among them as among the rest 4. In the Chinese study, only a few percent of respondents, including oil and gas companies, said their facilities employed professional corrosion engineers 8.

How is corrosion engineering different from corrosion management and inspection?

Corrosion engineering is the technical base: mechanisms, materials, protection and monitoring. Corrosion management adds policy, accountability, budgets and review across an organization; IMPACT found that in many oil and gas companies the management system stops at engineering and control practices 4. Inspection measures the damage.

Where integrity problems show up

Where it occurs (unit or equipment)Conditions that drive itHow it is usually foundIn the Library
Low points in gas transmission pipelinesWater, chlorides, oxygen, CO2, H2S and microbes collecting where the line sags 1 1Sampling liquids and solids removed from the line, coupons or probes, wall thickness measurement, in-line inspection 1What is corrosion monitoring and which methods are used?
Buried pipelines under cathodic protectionElectrochemical reaction between the outside of the pipe and the surrounding soil or water 9Cathodic protection surveys at least once each calendar year 2How does cathodic protection work?
Refinery process unitsDamage susceptibilities set by the unit's process conditions 3Inspection methods chosen per mechanism, as the API RP 571 write-ups guide 3What is a damage mechanism review?
Process equipment run outside its limitsTemperature, pressure or chemistry drifting past integrity operating windows 3Monitoring of process variables against the window limits 3What are integrity operating windows (IOWs)?
Pipelines carrying water, H2S or CO2 with the productContaminants carried along with the transported fluid 9In-line inspection, hydrostatic pressure testing or direct assessment 9What is pipeline integrity management?

Sources: NTSB PAR-03/01, 2003 1; 49 CFR 192.465 2; API 2025 catalog entries for RP 970 and RP 584 3; PHMSA corrosion fact sheet 9.

Common questions

Is a corrosion engineer the same as an integrity engineer or an inspector?
No. The inspector finds and records damage, and the corrosion engineer explains its cause and how to control it. How the roles divide in an asset integrity team is covered in [Who does what in asset integrity: integrity engineer, corrosion engineer, inspector?](/library/integrity-roles/).
Do corrosion engineers need a certification?
US pipeline rules require the person directing corrosion control to be qualified in pipeline corrosion control methods but do not name a certificate. AMPP offers certifications that test corrosion knowledge and experience at several levels.
What degree do corrosion engineers usually have?
Dedicated corrosion degrees are rare, so corrosion is usually studied within materials, chemical or mechanical engineering or chemistry programs, where university corrosion teaching sits, followed by professional training.

Beacon explains these concepts in its own words for education. It does not reproduce or replace the standards cited, and Winda is not affiliated with or endorsed by the organizations that publish them. Engineering decisions need the current edition of the standard and a qualified engineer.

Sources

  1. 1.Pipeline Accident Report NTSB/PAR-03/01, Natural Gas Pipeline Rupture and Fire Near Carlsbad, New Mexico, August 19, 2000 · US National Transportation Safety Board (NTSB) ·
  2. 2.49 CFR 192.453, General (corrosion control), with 49 CFR 192.465, 192.477 and 195.555 · eCFR, US Office of the Federal Register
  3. 3.2025 Publications Catalog (entries for RP 970, RP 584 and RP 571) (RP 970, 2nd edition, April 2023; RP 584, 2nd edition, December 2021; RP 571, 3rd edition, March 2020) · American Petroleum Institute (API)
  4. 4.International Measures of Prevention, Application, and Economics of Corrosion Technologies Study (IMPACT) (G. Koch and others) · NACE International ·
  5. 5.Corrosion Technician Certification · Association for Materials Protection and Performance (AMPP)
  6. 6.Senior Corrosion Technologist Certification · Association for Materials Protection and Performance (AMPP)
  7. 7.Internal Corrosion Specialist Certification · Association for Materials Protection and Performance (AMPP)
  8. 8.The cost of corrosion in China (B. Hou and others), npj Materials Degradation 1, 4 · Springer Nature (open access, CC BY 4.0) ·
  9. 9.Fact Sheet: Corrosion · US Pipeline and Hazardous Materials Safety Administration (PHMSA)