How are drones used to inspect oil and gas assets?
Drones (small unmanned aircraft) carry cameras and other sensors to inspect tall or hard-to-reach oil and gas assets such as flare stacks and tank roofs. They give close visual and thermal images without scaffolding or rope access, often while the plant keeps running. In the US, civil drones under 55 lb follow FAA rules in 14 CFR Part 107.
By Jun Zhong, Editor·Researched and drafted by Beacon's AI newsroom·Checked by Jun Zhong, Editor·Last checked ·Next review
Why does it matter?
An inspector needs a close look at the tip of a tall flare stack. US rules cap small drones at 400 feet above ground level, but 14 CFR 107.51 allows higher flight if the drone stays within a 400-foot radius of a structure and no more than 400 feet above its top 1. The alternatives named in a 2018 review from Khalifa University in Abu Dhabi are scaffolding, rope access and helicopters, which can put inspectors in hazardous places and may need a plant shutdown 2. The same review describes drone inspection of flare stacks, chimneys, cooling towers and tanks, onshore and offshore, without interrupting operation 2.
What can drones inspect?
| Asset | What the drone records | In the Library |
|---|---|---|
| Flare stacks, chimneys and cooling towers | Close images of external condition, in place of scaffolding, rope access or helicopter flights 2 | What is atmospheric corrosion? |
| Storage tanks | External images of shells and roofs 2 | What are the main types of storage tanks? |
| Steel lattice structures | Images in which trained models mark corroded areas; one study used drone images of a telecommunication tower 5 | How is AI used in industrial inspection? |
| Insulated piping and vessels | Thermal images that can show wet insulation, a condition for corrosion under insulation 3,4 | What is corrosion under insulation (CUI)? |
| Pipeline rights-of-way | Surface signs of leaks, construction and other activity; US gas rules allow patrols by flying among other means 6 | What is pipeline integrity management? |
Sources: Sudevan et al., 2018 2; HSE COMAH technical measures document 3; Cao et al., 2022 4; Forkan et al. 5; 49 CFR 192.705 6.
What sensors do inspection drones carry?
- Visual cameras. A drone camera is a form of remote visual inspection, the simplest NDT method, which finds surface damage and distortion and depends on lighting 3. HSE warns that with computerized video systems, image processing must not hide defects 3.
- Thermal cameras. Infrared images show surface temperature; changes in heat flow can point to wall thinning, scale or wet insulation 3. HSE notes that paint emissivity and sunlight reflections can distort readings, and a 2022 review adds temperature, wind speed, insulation material and pipe diameter 3,4.
- Contact sensors. The 2022 review describes a patented drone design that carries an infrared detector and a pulsed eddy current sensor to monitor corrosion under insulation 4. See What is pulsed eddy current (PEC) testing?.
What rules apply to drone inspection flights in the US?
- Pilot. The person at the controls needs a remote pilot certificate with a small unmanned aircraft rating, or must fly under direct supervision of a certificated remote pilot in command 1.
- Line of sight. The pilot or a visual observer must see the drone, with unaided vision, throughout the flight 1.
- Altitude and weather. Flights stay at or below 400 feet above ground, except near structures as above; groundspeed is limited to 87 knots (100 mph), visibility must be at least 3 statute miles, and drones keep 500 feet below and 2,000 feet horizontally from clouds 1.
- People. Flight over people is limited to those taking part, people under cover or in stationary vehicles, and operations meeting specific categories 1.
- Night. Night flight needs pilot training completed under the current rule and anti-collision lights visible for 3 statute miles 1.
- Waivers. The FAA can waive several of these limits, including line of sight, operation over people and the altitude limits 1.
These limits come from Part 107, which applies to civil small drones operated within the United States 1.
What can drones not do?
- See below the surface. Visual methods generally find only large discontinuities 7, and a camera cannot show corrosion under insulation or inside a vessel.
- Measure wall thickness on their own. Thickness needs a measuring method, such as ultrasonic gauging on a clean surface 3. See How does ultrasonic thickness measurement work?.
- Replace the inspector. The 2018 review notes that drone inspection then needed a certified pilot and an inspection engineer, and that automated flight was a research goal 2.
- Travel along or inside equipment. A flying camera views surfaces from a distance; HSE notes that visual methods need access to the surface and good lighting, and that inaccessible surfaces call for aids such as borescopes 3. Machines that move along or inside equipment are covered in What are robotic crawlers for inspection?.
Where integrity problems show up
| What it finds well | What it can miss or get wrong | In the Library |
|---|---|---|
| External corrosion and damage on tall structures, from close images 2,5 | Small cracks; visual methods generally find only large discontinuities 7 | What is atmospheric corrosion? |
| Likely wet insulation, from thermal images 3,4 | Readings shifted by emissivity, sunlight, wind and temperature; infrared marks places that may have CUI, not wall loss 3,4 | What is corrosion under insulation (CUI)? |
| Surface conditions along a pipeline right-of-way 6 | Pipe condition below ground, which patrols are not designed to observe 6 | What is in-line inspection (ILI) and pigging? |
| Flare stacks and towers inspected while the plant runs 2 | Remaining wall thickness, which needs a contact method 3 | How does ultrasonic thickness measurement work? |
Sources: Sudevan et al., 2018 2; HSE COMAH technical measures document 3; Cao et al., 2022 4; Forkan et al. 5; 49 CFR 192.705 6; FAA AC 43.13-1B 7.
Common questions
- Does a drone inspection count as NDT?
- A camera flight is remote visual inspection, which HSE's guidance on non-destructive testing lists among the aids to visual inspection, the simplest NDT technique. Its results carry the limits of visual testing.
- Can inspection drones fly beyond visual line of sight?
- In the US, only under an FAA certificate of waiver, since 14 CFR 107.205 lists the line-of-sight rule among those that can be waived.
- Who flies an inspection drone?
- A certificated remote pilot, or a person directly supervised by one. The 2018 review describes inspection flights pairing the pilot with an inspection engineer.
Beacon explains these concepts in its own words for education. It does not reproduce or replace the standards cited, and Winda is not affiliated with or endorsed by the organizations that publish them. Engineering decisions need the current edition of the standard and a qualified engineer.
Sources
- 1.14 CFR Part 107, Small Unmanned Aircraft Systems (sections 107.1, 107.3, 107.12, 107.29, 107.31, 107.39, 107.51 and 107.205) · eCFR, US Office of the Federal Register
- 2.Inspection of vertical structures in oil and gas industry: A review of current scenario and future trends (V. Sudevan, A. Shukla, H. Karki), SEG/AAPG/EAGE/SPE Research and Development Petroleum Conference, Abu Dhabi, pp. 65-68, DOI 10.1190/RDP2018-41952188.1 · Khalifa University of Science and Technology (research portal abstract)
- 3.Inspection/Non Destructive Testing (COMAH technical measures document) · UK Health and Safety Executive (HSE)
- 4.A Review of Corrosion under Insulation: A Critical Issue in the Oil and Gas Industry (Q. Cao et al.), Metals 12(4):561 · MDPI (open access, CC BY 4.0)
- 5.CorrDetector: A Framework for Structural Corrosion Detection from Drone Images using Ensemble Deep Learning (A. R. M. Forkan et al.), arXiv:2102.04686; published in Expert Systems with Applications · arXiv (preprint record with journal DOI 10.1016/j.eswa.2021.116461)
- 6.49 CFR 192.705, Transmission lines: Patrolling · eCFR, US Office of the Federal Register
- 7.Advisory Circular AC 43.13-1B, Acceptable Methods, Techniques, and Practices: Aircraft Inspection and Repair, Chapter 5: Nondestructive Inspection (NDI) · US Federal Aviation Administration (FAA)