Skip to content
Beaconby Winda
FactOperations, Maintenance and Process Safety · Maintenance and reliability

What is a computerized maintenance management system (CMMS)?

·9 sources

Short answer

A computerized maintenance management system (CMMS) is software that plans, issues and records maintenance work, from work orders to equipment histories. It schedules preventive tasks, tracks spare parts and labor, and stores the records that decisions depend on, but it does not make the decisions. Its inspection and test records can form part of process safety documentation.

By , Editor·Researched and drafted by ·Checked by , Editor·Last checked ·Next review

Why does it matter?

A maintenance system's backlog report is only as true as the data behind it. In its 2004 to 2007 inspections of nearly 100 UK offshore installations, Key Programme 3 (KP3), the UK Health and Safety Executive (HSE) found that maintenance management systems could hold large amounts of spurious data that hid the true level of backlog and corrective maintenance 1. Definitions of backlog, deferral and overdue work often lacked clarity, so senior managers could not easily see the size of the maintenance task, and maintenance recording drew more amber ratings than any other area inspected 1.

What does a CMMS do?

A guide written for the US Department of Energy (DOE) describes a CMMS as software that supports the management and tracking of operations and maintenance work 2. Its typical functions, in the guide's account:

FunctionWhat it handles
Work ordersGenerating, prioritizing and tracking work by equipment or component, with a sortable history of every order 2
Preventive maintenanceIssuing work orders on calendar or run-time schedules 2
Equipment recordsProcedures, technical documents and warranty information stored by component 2
MaterialsSpare parts and materials inventory, with automatic reordering 2
Cost and timeLabor and capital cost by component, and the time taken to close work orders 2
Field useHandheld input in the field and dispatch of outside service calls 2

Source: DOE O&M Best Practices Guide, Release 3.0, 2010 2.

The same guide makes a limit plain: a CMMS collects and stores information in a form that can be retrieved, but it does not make decisions 2. It lists common pitfalls as choosing the wrong system for the site, too little training for the staff who enter and maintain data, and too little commitment to implementing it and keeping it in use 2.

A CMMS can also start work from condition data. DOE describes linking a sensor alarm in a building's control system to the CMMS, so that a filter's pressure limit generates a work order automatically instead of waiting for a fixed change date 2. NASA's reliability-centered maintenance guide directs maintenance staff to use CMMS and building control systems to document maintenance costs, avoided costs and savings, and describes wireless data collectors feeding the CMMS directly 6.

What data does a CMMS need to be useful?

  • Records the rules ask for. US process safety rules require each inspection and test of covered equipment to be documented with the date, the name of the person who did it, the equipment's serial number or other identifier, a description of the work and the results 4. US offshore safety and environmental management system (SEMS) rules add the person's position and signature 5.
  • Tags that follow the physical item. In its 2011 to 2013 ageing inspections, Key Programme 4 (KP4), HSE found that computer systems usually identify equipment by functional location, so a replacement pump inherits the old tag, traceability is lost and performance histories can be confused 3.
  • Clear definitions. HSE found that unclear definitions of backlog, deferral and overdue work made maintenance performance hard to measure and compare 1.
  • Links to performance standards. Work orders for safety-critical equipment often lacked any reference to the performance standard, test requirements or acceptance criteria, so managers onshore could not confirm that the equipment met its standard 1.
  • Failure and maintenance data in a common format. ISO 14224:2016 groups the data to collect into equipment, failure and maintenance data, including failure cause and maintenance downtime 7, and Norway's guidelines name it for registering failure and maintenance data 8.
  • The reasons behind decisions. The US Department of Defense (DoD) manual on reliability-centered maintenance asks for assumptions, decisions and their rationale to be kept as an audit trail, in a database that can grow over the equipment's life 9.

How does a CMMS relate to other plant systems?

A CMMS sits beside other systems rather than replacing them. HSE's KP4 found that most computerized maintenance management systems can analyze and trend data, but that companies often used separate specialist software and spreadsheets stored on local drives, and that much information was held as free text, which makes trending difficult 3. Asset performance management combines CMMS work order data with condition, reliability and integrity data; see What is asset performance management (APM)?. For how maintenance and integrity responsibilities divide, see Asset integrity vs reliability vs asset performance management.

Where integrity problems show up

Element or stepIntegrity linkIn the Library
Documenting each inspection and testRequired content under 29 CFR 1910.119(j)(4)(iv) and 30 CFR 250.1916(d) 4,5What is mechanical integrity (MI)?
Linking work orders to performance standardsWithout the link and clear acceptance criteria, HSE found that safety-critical element status could not be monitored 1Performance standard (for safety-critical elements)
Tagging equipment by functional location onlyA replaced pump takes the old tag, so histories mix and trending fails 3What is an asset register and what data should it hold?
Tracking backlog and deferrals of safety-critical workSpurious data and unclear definitions hid the true backlog on UK installations 1What are safety and environmental critical elements (SECEs)?
Raising work orders from condition dataSensor limits can trigger work orders automatically 2; HSE called for trending to avoid fix-on-fault maintenance 3What is predictive maintenance in oil and gas?
Recording failure cause and mechanism consistentlyNorway's guidelines name ISO 14224 for failure and maintenance data 8What is ISO 14224 (reliability and maintenance data)?

Sources: HSE KP3, 2007 1; DOE, 2010 2; HSE KP4, 2014 3; 29 CFR 1910.119(j) 4; 30 CFR 250.1916 5; Norway's guidelines to the Activities Regulations, 2024 8.

Common questions

Does a CMMS decide what maintenance to do?
No. DOE states that a CMMS provides information but does not make decisions. The tasks and intervals it schedules come from methods such as reliability-centered maintenance, manufacturers' recommendations and inspection planning; see [What is reliability-centered maintenance (RCM)?](/library/reliability-centered-maintenance/).
Is a CMMS the same as an inspection data management system (IDMS)?
Not necessarily. DOE describes a CMMS around work orders, schedules, histories and parts, while fixed equipment inspection readings and the corrosion rates calculated from them can be held in a dedicated inspection database; HSE found companies often used specialist tools alongside the maintenance system. See [What is an inspection data management system (IDMS)?](/library/inspection-data-management-system/).
What must a CMMS record for process safety?
For equipment covered by US process safety rules, each inspection and test needs its date, the person, the equipment identifier, what was done and the result. Offshore SEMS rules also require the person's position and signature.

Beacon explains these concepts in its own words for education. It does not reproduce or replace the standards cited, and Winda is not affiliated with or endorsed by the organizations that publish them. Engineering decisions need the current edition of the standard and a qualified engineer.

Sources

  1. 1.Key Programme 3: Asset Integrity Programme · UK Health and Safety Executive (HSE), Offshore Division
  2. 2.Operations & Maintenance Best Practices: A Guide to Achieving Operational Efficiency, Release 3.0 (PNNL-19634) · Pacific Northwest National Laboratory for the US Department of Energy, Federal Energy Management Program
  3. 3.Key Programme 4 (KP4): Ageing and life extension programme · UK Health and Safety Executive (HSE), Energy Division
  4. 4.29 CFR 1910.119, Process safety management of highly hazardous chemicals, paragraph (j) Mechanical integrity · eCFR, US Office of the Federal Register
  5. 5.30 CFR 250.1916, What criteria for mechanical integrity must my SEMS program meet? · eCFR, US Office of the Federal Register
  6. 6.Reliability-Centered Maintenance Guide for Facilities and Collateral Equipment · US National Aeronautics and Space Administration (NASA)
  7. 7.ISO 14224:2016, Petroleum, petrochemical and natural gas industries: Collection and exchange of reliability and maintenance data for equipment (standard page) (ISO 14224:2016, edition 3, confirmed 2022) · International Organization for Standardization (ISO)
  8. 8.Guidelines regarding the Activities Regulations · Norwegian Ocean Industry Authority (Havtil) and other Norwegian authorities
  9. 9.DoD Manual 4151.22-M, Reliability Centered Maintenance (RCM), incorporating Change 1 · US Department of Defense (via Whole Building Design Guide)