Skip to content
Beaconby Winda
FactAsset Integrity Management · Integrity management systems

What is corrosion management?

·8 sources

Short answer

Corrosion management is the management system an organization uses to plan, carry out, check and improve how it controls corrosion over an asset's life. It covers policy, responsibilities, risk assessment, mitigation, inspection and review. It differs from corrosion control methods, such as coatings or inhibitors, which it selects and oversees.

By , Editor·Researched and drafted by ·Checked by , Editor·Last checked ·Next review

Why does it matter?

A written corrosion strategy does not by itself stop corrosion. In inspections from 2011 to 2013, the UK Health and Safety Executive (HSE) found offshore operators had well-developed corrosion threat assessments feeding risk-based inspection and corrosion strategies, yet incident data showed corrosion's share of hydrocarbon leaks was rising 4. HSE called for the documented strategies to be turned into physical results 4. A 2016 global study estimated that applying available corrosion control practices could save 15 to 35% of the cost of corrosion, about US$375 to 875 billion a year 1.

How is corrosion management different from corrosion control?

Corrosion controlCorrosion management
What it isTechnical measures that prevent or slow corrosionPolicies, processes and procedures that plan, run and improve those measures 1,2
ExamplesCoatings, inhibitors, corrosion-resistant metals, cathodic protection 1Threat assessment, inspection planning, budgets, competence, change control, review 1,4
Works at the level ofA material, a stream, a piece of equipmentThe organization, from senior management to work practices 1
Evidence that it worksCorrosion rates, coating condition, protection readingsLeaks, backlogs, plans carried out, cost of corrosion tracked 1,4

Sources: NACE IMPACT study, 2016 1; AMPP 2; HSE KP4, 2014 4.

The 2016 International Measures of Prevention, Application, and Economics of Corrosion Technologies (IMPACT) study found that most corrosion specialists work at the level of procedures and working practices, and few organizations link that work to policy, strategy and performance measures 1. Without that link, it concluded, sound business decisions on corrosion are unlikely 1. The methods themselves are covered in What are the main methods of corrosion control?.

What does a corrosion management system include?

  • Direction from the top. Policy, strategy and objectives need senior management ownership; a technical manager usually promotes the system, but company-wide initiatives rarely start without top-level support 1.
  • A risk-based plan. Corrosion threats are assessed and mitigation is chosen by corrosion type, asset criticality, life-cycle cost and regulation 1. Offshore, these assessments usually follow Energy Institute guidance and feed risk-based inspection 4.
  • People and resources. Specialists analyze inspection data and turn it into plans; HSE found that where onshore corrosion resource was missing, data went unanalyzed 3.
  • Change control and learning. Top performers in the IMPACT survey made corrosion part of formal management of change and recorded lessons from failures, near misses and inspections 1.
  • Measures and review. Key performance indicators, audits and management review show whether the plan works 1; HSE found too few leading indicators for forecasting aging problems 4.

How does corrosion management work across the asset life?

IMPACT divides an asset's life into design, manufacturing or construction, operation and maintenance, and abandonment, decommissioning or mothballing, and found that many operating problems start in earlier phases 1. Top performers were about twice as likely to track corrosion costs in the design and construction phases, while only about half of all respondents had design strategies that addressed corrosion 1.

In operation, HSE's 2014 report describes good practice as looking ahead to reservoir changes, such as rising water cut or souring, and to fluids arriving from other fields 4. On older offshore assets, operators were increasingly replacing process piping with corrosion-resistant alloys 4. HSE's corrosion and materials team covers the whole offshore lifecycle, from materials selection to life extension and decommissioning 8.

What do regulators expect?

Rules and regulators reach corrosion management one part at a time, as in these examples 5,6,7,3:

  • US gas pipelines. Corrosion control procedures, including those for cathodic protection, must be carried out or supervised by someone qualified in pipeline corrosion control (49 CFR 192.453) 5.
  • US liquid pipelines. Supervisors must keep a thorough knowledge of the corrosion procedures they are responsible for (49 CFR 195.555) 6.
  • US process plants. The non-mandatory compliance guidelines in Appendix C of the Occupational Safety and Health Administration (OSHA) process safety rule note that inspection codes set inspection frequency from the corrosion rate and give methods to develop the rate where it is unknown 7.
  • UK offshore. HSE inspects corrosion management in its key programs 3,4 and helped produce the Energy Institute's Guidance for corrosion management in oil and gas production and processing 8.

Where integrity problems show up

DecisionData it depends onWhat goes wrong without itIn the Library
Staffing onshore corrosion analysisOffshore inspection resultsData went unanalyzed, coherent corrosion programs were not built, and corrosion problems kept growing 3What does a corrosion engineer do?
Keeping painting crews during busy periodsFabric condition surveysPainting teams were the first removed to free bed space, and corrosion rose as programs shrank 3How do protective coatings prevent corrosion?
Updating threat assessments as reservoirs changeForecast water cut, souring and tie-in fluidsCorrosivity changes go unplanned; corrosion's share of leaks was rising in 2014 4What is carbon dioxide (CO2) corrosion?, Sour service
Setting the scope of threat assessmentsComplete lists of equipment and lines, current isometricsVendor packages, air receivers and hydraulic accumulators were not consistently assessed 4What is risk-based inspection (RBI)?
Choosing materials and allowances in designOperating experience from operations staffOperations staff are often not consulted, and the asset needs heavy corrosion maintenance later 1What is a corrosion risk assessment in FEED?
Looking for hidden corrosionInspection methods that see under supports, insulation and boltsHSE called for more accurate testing at pipe supports, under insulation and on nuts and bolts 4What is corrosion under insulation (CUI)?

Sources: HSE KP3, 2007 3; HSE KP4, 2014 4; NACE IMPACT study, 2016 1.

Common questions

Is there a standard for corrosion management systems?
The Association for Materials Protection and Performance (AMPP) lists a standard titled *Standard Framework for Establishing Corrosion Management Systems*. The IMPACT study published a framework that can sit inside an existing management system or stand alone, and UK offshore assessments usually follow Energy Institute guidance.
How does corrosion management relate to asset integrity management?
IMPACT notes that corrosion is sometimes handled inside asset integrity management plans, alongside other structural threats. See [What is asset integrity management in oil and gas?](/library/asset-integrity-management/).
Who is responsible for corrosion management?
Ownership runs from senior management down. HSE saw improved results where integrity teams with access to senior managers met regularly to rank and resolve corrosion problems.

Beacon explains these concepts in its own words for education. It does not reproduce or replace the standards cited, and Winda is not affiliated with or endorsed by the organizations that publish them. Engineering decisions need the current edition of the standard and a qualified engineer.

Sources

  1. 1.International Measures of Prevention, Application, and Economics of Corrosion Technologies Study (IMPACT) (G. Koch and others) · NACE International (now AMPP) ·
  2. 2.Corrosion Management · Association for Materials Protection and Performance (AMPP)
  3. 3.Key Programme 3: Asset Integrity Programme · UK Health and Safety Executive (HSE)
  4. 4.Key Programme 4 (KP4): Ageing and life extension programme · UK Health and Safety Executive (HSE)
  5. 5.49 CFR 192.453, General (corrosion control) · eCFR, US Office of the Federal Register
  6. 6.49 CFR 195.555, What are the qualifications for supervisors? · eCFR, US Office of the Federal Register
  7. 7.29 CFR 1910.119, Process safety management of highly hazardous chemicals, Appendix C (Compliance Guidelines and Recommendations) · eCFR, US Office of the Federal Register
  8. 8.Offshore topics (Corrosion and materials) · UK Health and Safety Executive (HSE)