Skip to content
Beaconby Winda
FactCorrosion and Damage Mechanisms · Corrosion basics

How much does corrosion cost the oil and gas industry?

·10 sources

Short answer

In the 2002 US cost of corrosion study (1998 data), corrosion cost oil and gas production, transmission pipelines and refining about US$12 billion a year. Across all sectors worldwide, NACE's 2016 IMPACT study put corrosion's cost at US$2.5 trillion, about 3.4% of global GDP in 2013. Figures depend on each study's year and method.

By , Editor·Researched and drafted by ·Checked by , Editor·Last checked ·Next review

Why does it matter?

The International Measures of Prevention, Application, and Economics of Corrosion Technologies (IMPACT) study, published by NACE International in 2016, estimated corrosion's global cost at US$2.5 trillion in 2013, about 3.4% of world gross domestic product (GDP) 1. It also judged that existing corrosion control practices could save 15% to 35% of that, or US$375 billion to US$875 billion a year 1. Those totals leave out most safety and environmental consequences 1. For US pipelines, the Pipeline and Hazardous Materials Safety Administration (PHMSA) attributes about 17% of incidents reported on gas transmission and gathering lines and hazardous liquid pipelines in 2013 to 2017 to corrosion 6.

What do the main cost of corrosion studies say?

Each figure below is given as its study published it, in the money of the data year, with no adjustment for inflation 2,3,5,1.

Study (published)Data yearHeadline estimateOil and gas detailSource
Uhlig study, United States (1949)1949US$5.5 billion a year, about 2.1% of gross national product (GNP)Not split out1
Hoar Report, United Kingdom (early 1970s)1969 to 1970£1,365 million a year, 3.5% of GNP; about £310 million judged savableOil and chemical was one of the sectors surveyed1,2
National Bureau of Standards (NBS) and Battelle, Economic Effects of Metallic Corrosion in the United States (1978)1975About US$70 billion, 4.2% of GNP, with an uncertainty of about plus or minus 30%; about US$10 billion avoidableNot split out in the summary2
Kuwait cost of corrosion study (1990s)1987About US$1 billion, 5.2% of GDP; 18% avoidableCrude petroleum and refining: about US$60 million1
Federal Highway Administration (FHWA), Corrosion Cost and Preventive Strategies in the United States (2002)1998US$276 billion in direct costs, 3.1% of GDP; indirect costs judged at least as largeSee the sector table below3,4
China, Study of Corrosion Status and Control Strategies (results published 2017)2014About 2,128 billion yuan (about US$310 billion), 3.34% of GDPOil and gas exploration, production and transmission: 34.7 billion yuan in direct costs, 2.82% of production value5
NACE International, IMPACT (2016)2013US$2.5 trillion worldwide, 3.4% of global GDPExtrapolated from five national studies; no oil and gas figure1

Gulf states. IMPACT also lists 2011 estimates for six Gulf states, each as a share of GDP: Saudi Arabia 2.7%, Bahrain 2.1%, Oman 1.8%, Kuwait 1.7%, the United Arab Emirates 1.3% and Qatar 0.7% 1. Because these studies report only a national total, IMPACT could not use them in its sector analysis 1.

How much does corrosion cost each oil and gas sector?

The 2002 FHWA study breaks its estimate down by sector, several of them in oil and gas; its direct annual costs, on 1998 data, were as follows 4,1:

Sector in the FHWA studyDirect cost per year (US$ billion, 1998 data)
Oil and gas exploration and production1.4
Gas and liquid transmission pipelines7.0
Petroleum refining3.7
Gas distribution5.0
Hazardous materials storage (aboveground tanks 4.5, underground tanks 2.5)7.0
Chemical, petrochemical and pharmaceutical1.7
Hazardous materials transport0.9

Sources: Koch, 2004 4; IMPACT, Table A-4 1.

Production, transmission pipelines and refining together come to about US$12.1 billion a year, the sum of the three published figures 4. The study analyzed 26 sectors totaling US$137.9 billion and extrapolated to the national US$276 billion 3,4. It also counted US$121 billion a year spent on corrosion control methods and services, of which protective coatings were about US$108.6 billion 3,4.

Why do the estimates differ?

The studies use three methods. The Uhlig method adds up spending on corrosion control products and services; the Hoar method builds the total sector by sector from expert estimates of losses and countermeasures; and the input/output method, used by Battelle for NBS, models the economy with and without corrosion 1,2. IMPACT gives the US figure as 2.5% of GDP in 1949 (Uhlig method), 4.5% in 1975 (input/output) and 3.1% in 1998 (Hoar method), and warns that the methods are too different to compare directly 1; NBS itself reported the 1975 figure as 4.2% of GNP 2. The Chinese study adds that how a country classifies direct and indirect costs, and the shape of its economy, also change the result 5.

How much of the cost can be avoided?

  • NBS, 1975 data: about 15% avoidable, with a possible range of 10% to 45% 2.
  • Hoar Report: about 23% savable with better use of existing knowledge 1.
  • Kuwait, 1987 data: 18% avoidable 1.
  • IMPACT, 2016: 15% to 35% savable with available practices 1.

Where integrity problems show up

Where it occurs (unit or equipment)Conditions that drive itHow it is usually foundIn the Library
Transmission pipelines (US$7.0 billion a year, 1998 data 4)Outside: soil, air or water against the pipe; inside: water, H2S and CO2 carried with the product 6In-line inspection, hydrostatic pressure testing or direct assessment 6What is pipeline integrity management?
Aboveground and underground storage tanks (US$7.0 billion, 1998 data 4)Corrosion is one of the leading causes of tank and piping failures 4Regular integrity tests such as visual, hydrostatic, radiographic, ultrasonic or acoustic emission testing (40 CFR 112.8) 7What is API 653 (aboveground storage tank inspection)?
Refinery furnace tubes and towers (refining US$3.7 billion, 1998 data 4)Sour crude at metal temperatures above about 450 °F (about 230 °C) 8Inspection methods chosen per damage mechanism, as API RP 571 (3rd edition, 2020) guides 9What is sulfidation (high-temperature sulfur corrosion)?
Offshore production piping (exploration and production US$1.4 billion, 1998 data 4)Wet sour gas, deposits and oxygen ingress, as in a 2012 release off California 10Radiography where routine ultrasonic readings are unreliable 10What is under-deposit corrosion?
Buried piping at onshore oil facilitiesSoil contact; new or replaced buried piping since 2002 must be coated and cathodically protected 7Inspection whenever a buried section is exposed (40 CFR 112.8(d)) 7How does cathodic protection work?

Sources: Koch, 2004 4; PHMSA corrosion fact sheet 6; 40 CFR 112.8 7; OSHA Technical Manual 8; BSEE OCS Report 2012-104 10.

Common questions

Is the often-quoted US$2.5 trillion an oil and gas figure?
No. It is IMPACT's estimate for all sectors worldwide in 2013. Oil and gas figures come from national studies such as the US 2002 study and the Chinese 2017 study.
Is there a more recent global estimate?
Among the sources read for this page, IMPACT (2016, data year 2013) is the latest global estimate. Newer national figures, such as China's 2014 data, exist for single countries.
Do these figures include accidents?
Mostly not. IMPACT states that its costs typically exclude individual safety and environmental consequences, and the US study judged indirect costs, such as lost productivity, to be at least equal to direct costs.

Beacon explains these concepts in its own words for education. It does not reproduce or replace the standards cited, and Winda is not affiliated with or endorsed by the organizations that publish them. Engineering decisions need the current edition of the standard and a qualified engineer.

Sources

  1. 1.International Measures of Prevention, Application, and Economics of Corrosion Technologies Study (IMPACT) (G. Koch and others) · NACE International ·
  2. 2.NBS Special Publication 511-1, Economic Effects of Metallic Corrosion in the United States: A Report to the Congress (L. H. Bennett and others) · US National Bureau of Standards (now NIST)
  3. 3.Corrosion Cost and Preventive Strategies in the United States, FHWA-RD-01-156 (TRID record) · Transportation Research Board (TRID), record of a US Federal Highway Administration report
  4. 4.The Impact of Corrosion on Storage Tanks and Piping (G. Koch), Freshwater Spills Symposium · US Environmental Protection Agency archive (NACE International presentation)
  5. 5.The cost of corrosion in China (B. Hou and others), npj Materials Degradation 1, 4 · Springer Nature (open access, CC BY 4.0) ·
  6. 6.Fact Sheet: Corrosion · US Pipeline and Hazardous Materials Safety Administration (PHMSA)
  7. 7.40 CFR 112.8, Spill Prevention, Control, and Countermeasure Plan requirements for onshore facilities · eCFR, US Office of the Federal Register
  8. 8.OSHA Technical Manual, Section IV, Chapter 2: Petroleum Refining Process · US Occupational Safety and Health Administration (OSHA)
  9. 9.2025 Publications Catalog (entry for RP 571) (RP 571, 3rd edition, March 2020) · American Petroleum Institute (API)
  10. 10.OCS Report BSEE 2012-104, Investigation of H2S Gas Release, Platform Hidalgo, OCS-P 0450, Pacific OCS Region · US Bureau of Safety and Environmental Enforcement (BSEE)