What are API standards and how are they organized?
API standards are consensus documents for the oil and gas industry published by the American Petroleum Institute (API), which reports more than 800. Each carries a label (Specification, Standard, Code or Recommended Practice) and a number, sits in an industry segment of API's catalog, and is developed under an American National Standards Institute (ANSI) accredited process.
By Jun Zhong, Editor·Researched and drafted by Beacon's AI newsroom·Checked by Jun Zhong, Editor·Last checked ·Next review
Why does it matter?
Many engineers read "Recommended Practice" as optional and "Code" as law. API's 2025 procedures state that its labels set no ranking for regulatory compliance 2. What makes a document binding is the rule or contract that adopts it: US gas pipeline operators must run public awareness programs that follow the recommendations of API RP 1162, unless they document why a provision is neither practicable nor needed for safety 9. In refineries, the Occupational Safety and Health Administration (OSHA) names API 510, API 570 and API 580 as examples of the good engineering practice that inspection programs follow 12.
What do Spec, Std, Code and RP mean?
API staff assign each document one of four labels, based on its content, before it is published 2.
| Label | What it is under API's procedures | Example |
|---|---|---|
| Specification (Spec) | Performance requirements for equipment and materials, written so buyers, makers and service suppliers work to the same terms | Spec 5L, line pipe: API's first standard, from 1924 8 |
| Standard (Std) | A document that combines features of a specification and a recommended practice | Std 650, welded oil storage tanks; Std 653, tank inspection and repair |
| Code | A standard intended for adoption by regulators or other authorities having jurisdiction | API 510 and API 570, the pressure vessel and piping inspection codes |
| Recommended Practice (RP) | Describes recognized industry practice and may hold both mandatory and optional provisions | RP 571 on damage mechanisms; RP 580 and RP 581 on risk-based inspection |
| Bulletin, Technical Report (TR) | Not standards: a bulletin informs without requirements or recommendations; a TR may carry limited recommendations | Research results, one-off topics |
Sources: API Procedures for Standards Development, 2025 2; API 2025 catalog 3.
Inside every label the verbs carry the weight. "Shall" marks a requirement, "should" a recommendation that is advised but not required, "may" a permitted option and "can" a possibility 2. API adds that an authority that incorporates one of its standards can make both the requirements and the recommendations mandatory 2.
How is the API catalog organized?
API's 2025 catalog groups documents by industry segment, then by subject 3:
- Exploration and Production: offshore structures, tubular goods, valves and wellhead equipment, drilling and subsea equipment. 3
- Petroleum Measurement: the Manual of Petroleum Measurement Standards (MPMS), in chapters. 3
- Marketing and Transportation: fuel distribution, pipeline operations and pipeline maintenance welding. 3
- Refining: refinery equipment inspection, storage tanks, pressure-relieving systems, materials engineering and process safety. 3
- Safety and Fire Protection; Health and Environmental Issues. 3
The number places a document in its family; it is not a rank. Fixed-equipment inspection documents sit together in the refining chapter: API 510, API 570 and Std 653 beside a run of 570 and 580 series recommended practices 3. Some API documents adopt International Organization for Standardization (ISO) standards; RP 2EQ, for example, takes ISO 19901-2 as its base, with changes 3.
How are API standards made and kept current?
Committees work through subcommittees and task groups open to parties materially affected by a standard, from oil and gas companies, manufacturers and contractors to government agencies and academia 5. A ballot passes when a majority of those eligible vote and at least two-thirds of those voting approve, not counting abstentions 2.
Each standard is reviewed at least every 5 years, then revised, reaffirmed or withdrawn; addenda and errata come between editions 2. API answers formal requests for interpretation only on the current edition, and replies can take up to 12 months 7. API, founded in 1919 with about 600 member companies today, gives read-only online access to nearly 200 key standards in its Incorporated by Reference (IBR) Reading Room 1,4,6. The update cycle is covered in How are API standards updated (editions, addenda, errata)?
Which API standards does the Library cover?
| Document | Title (short) | Edition in API's 2025 catalog | In the Library |
|---|---|---|---|
| API 510 | Pressure Vessel Inspection Code | 11th, October 2022 (Errata 1, March 2023) | What is API 510? |
| API 570 | Piping Inspection Code | 5th, February 2024 | What is API 570? |
| Std 653 | Tank Inspection, Repair, Alteration, and Reconstruction | 5th, November 2014, with Addenda 1 to 3 (April 2018 to November 2023) | What is API 653 (aboveground storage tank inspection)? |
| RP 572 | Inspection Practices for Pressure Vessels | 5th, November 2023 | What is API 572 (inspection practices for pressure vessels)? |
| RP 574 | Inspection Practices for Piping System Components | 5th, February 2024 | What is API 574 (inspection practices for piping)? |
| RP 580 | Elements of a Risk-Based Inspection Program | 4th, August 2023 | What is API 580? |
| RP 581 | Risk-Based Inspection Methodology | 3rd, April 2016, with Addenda 1 (April 2019) and 2 (October 2020) | What is API 581? |
| API 579-1/ASME FFS-1 | Fitness-For-Service (joint with the American Society of Mechanical Engineers, ASME) | 4th, December 2021 | What is fitness-for-service (API 579-1/ASME FFS-1)? |
| RP 584 | Integrity Operating Windows | 2nd, December 2021 | What are integrity operating windows (IOWs)? |
| Std 650 | Welded Tanks for Oil Storage | 13th, March 2020 (Errata 1, January 2021) | What is API 650 (welded steel tanks for oil storage)? |
| RP 1160 | Managing System Integrity for Hazardous Liquid Pipelines | 3rd, February 2019, reaffirmed March 2024 | What is API 1160 (integrity management for hazardous liquid pipelines)? |
Source: API 2025 Publications Catalog 3. Comparisons: API 510 vs API 570 vs API 653, API 580 vs API 581; inspector exams: How do API 510, 570 and 653 inspector certifications work?
Where integrity problems show up
| Requirement | What it means for integrity records or work | In the Library |
|---|---|---|
| 29 CFR 1910.119(j)(4)(ii) and (iii) | Inspection and test procedures and frequencies must follow recognized and generally accepted good engineering practice (RAGAGEP); OSHA's 2017 refinery review names API 510, 570 and 580 as examples and cited thickness readings and intervals that fell short of it 11,12 | What is RAGAGEP? |
| 29 CFR 1910.119(j)(4)(iv) | Each inspection or test record gives the date, inspector, equipment identifier, work done and results, whichever API document set the method 11 | What inspection records do codes require you to keep? |
| 49 CFR 195.432(b) and (c) | Atmospheric breakout tanks are inspected to API Std 653, without its risk-based internal interval option; pressurized API 2510 tanks follow section 6 of API 510 10 | What is API 653? |
| 49 CFR 192.493 and 195.591 | In-line inspections must comply with API Std 1163 together with ANSI/ASNT ILI-PQ and NACE SP0102; the liquid rule names their requirements and recommendations 9,10 | What is in-line inspection (ILI) and pigging? |
| 49 CFR 192.225 and 192.227 | Pipeline welding procedures and welders qualify under API Std 1104 or ASME Section IX, and each procedure record is kept and followed 9 | What are a WPS and a PQR? |
Sources: eCFR 29 CFR 1910.119 11; OSHA 3918, 2017 12; eCFR 49 CFR 192 and 195 9,10.
Common questions
- Are API standards free to read?
- Most are sold. Nearly 200 key standards, many incorporated into US federal rules, can be read free online, read-only, in API's IBR Reading Room.
- Is an API recommended practice optional?
- Not always. An RP may contain mandatory provisions, and a regulation or contract can make it binding. The labels are compared in Code vs standard vs recommended practice: what is the difference?
- Are API standards the same as ASME standards?
- No. API and ASME are separate bodies, although they publish API 579-1/ASME FFS-1 together. See API vs ASME: who writes which standards?
Beacon explains these concepts in its own words for education. It does not reproduce or replace the standards cited, and Winda is not affiliated with or endorsed by the organizations that publish them. Engineering decisions need the current edition of the standard and a qualified engineer.
Sources
- 1.Standards · American Petroleum Institute (API)
- 2.Procedures for Standards Development (8th edition, August 2025 (ANSI approved August 2025)) · American Petroleum Institute (API)
- 3.2025 Publications Catalog (editions as listed in the 2025 catalog) · American Petroleum Institute (API)
- 4.About API · American Petroleum Institute (API)
- 5.Standards Committees · American Petroleum Institute (API)
- 6.IBR Reading Room · American Petroleum Institute (API)
- 7.Standards Requests for Interpretation Guidelines · American Petroleum Institute (API)
- 8.Standards News Highlights (API Announces 47th Edition of Foundational Line Pipe Standard, 2 June 2026) · American Petroleum Institute (API) ·
- 9.49 CFR Part 192 (sections 192.7, 192.225, 192.227, 192.493, 192.616) · eCFR, US Office of the Federal Register
- 10.49 CFR Part 195 (sections 195.3, 195.432, 195.591) · eCFR, US Office of the Federal Register
- 11.29 CFR 1910.119, Process safety management of highly hazardous chemicals · eCFR, US Office of the Federal Register
- 12.Process Safety Management for Petroleum Refineries: Lessons Learned from the Petroleum Refinery Process Safety Management National Emphasis Program (OSHA 3918) · US Occupational Safety and Health Administration (OSHA)